ca27b3d370
The Cisco ON100 device is a Kirkwood based router:
SoC: Marvell 88F6282 1600Mhz
SDRAM memory: 512MB DDR3 1333Mhz
Gigabit ethernet: 2x Marvell 88E1310 (over RGMII)
Flash memory: 512MB
2 bi-colour status LEDs (green/red)
1 Reset button
1 USB 2.0 port (on back)
1 SDIO slot (on back)
This commit adds a target profile of "Cisco Systems ON100" under the target
system "Marvell Kirkwood".
Flashing can be performed over tftp, once "dhcp" has been issued:
tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin
nand erase 0x0c0000 ${filesize}
nand write ${loadaddr} 0x0c0000 ${filesize}
Once flashed, set environment variables to boot:
setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs
\; bootm
saveenv
Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
|
||
|---|---|---|
| .. | ||
| 100-find_active_root.patch | ||
| 110-ib62x0.patch | ||
| 130-iconnect.patch | ||
| 140-dockstar.patch | ||
| 160-ea4500.patch | ||
| 170-ea3500.patch | ||
| 180-goflexhome.patch | ||
| 181-goflexnet.patch | ||
| 190-zyxel-nsa3xx-common-nand-partitions.patch | ||
| 191-nsa310b.patch | ||
| 192-nsa310s.patch | ||
| 194-nsa325.patch | ||
| 195-on100.patch | ||
| 200-disable-tso.patch | ||
| 210-enable-sata-port-specific-led-triggers.patch | ||