openwrtv3/package/network/services/dnsmasq/Makefile
Eric Luehrsen 1b4e3eda1b dnsmasq: expand 'add_local_hostname' fexibility including FQDN
ref commit 612e2276b4
ref commit ec63e3bf13

'option add_local_hostname' scripted implementation statically assigns
this host in auto generated host file at init. If IFUP or other signals
do not occur, then address changes are not tracked. The script doesn't
apply all the addresses at an interface. This may make logs obscure.
The script only puts the bare host name (maybe not FQDN) in host file,
but if '--exapandhosts' is enabled, then /etc/hosts entries will be
suffixed, and "127.0.0.1 localhost" becomes "localhost.lan".

dnsmasq provides an option to perform this function, but it is rather
greedy. '--interface-name=<name>,<iface>' will assign the name to all
IP on the specified interface (except link local). This is a useful
feature, but some setups depend on the original restrictive behavior.

'option add_local_fqdn' is added to enhance the feature set, but
if not entered or empty string, then it will default to original
option and behavior. This new option has a few settings. At each
increased setting the most detailed name becomes the PTR record:
0 - same as add_local_hostname 0 or disabled
1 - same as add_local_hostname 1
2 - assigns the bare host name to all IP w/ --dnsmasq-interface
3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface
4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface

'option add_wan_fqdn' is added to run the same procedure on
inferred WAN intefaces. If an interface has 'config dhcp' and
'option ignore 1' set, then it is considered WAN. The original
option would only run on DHCP serving interfaces.

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
2017-02-02 00:13:49 +01:00

169 lines
4.9 KiB
Makefile

#
# Copyright (C) 2006-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=dnsmasq
PKG_VERSION:=2.76
PKG_RELEASE:=7
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=http://thekelleys.org.uk/dnsmasq
PKG_HASH:=4b92698dee19ca0cb2a8f2e48f1d2dffd01a21eb15d1fbed4cf085630c8c9f96
PKG_LICENSE:=GPL-2.0
PKG_LICENSE_FILES:=COPYING
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
PKG_INSTALL:=1
PKG_BUILD_PARALLEL:=1
PKG_CONFIG_DEPENDS:=CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcpv6 \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dnssec \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_auth \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_ipset \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_conntrack \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_noid \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_broken_rtc
include $(INCLUDE_DIR)/package.mk
define Package/dnsmasq/Default
SECTION:=net
CATEGORY:=Base system
TITLE:=DNS and DHCP server
URL:=http://www.thekelleys.org.uk/dnsmasq/
USERID:=dnsmasq=453:dnsmasq=453
endef
define Package/dnsmasq
$(call Package/dnsmasq/Default)
VARIANT:=nodhcpv6
endef
define Package/dnsmasq-dhcpv6
$(call Package/dnsmasq/Default)
TITLE += (with DHCPv6 support)
DEPENDS:=@IPV6
VARIANT:=dhcpv6
endef
define Package/dnsmasq-full
$(call Package/dnsmasq/Default)
TITLE += (with DNSSEC, DHCPv6, Auth DNS, IPset, Conntrack, NO_ID enabled by default)
DEPENDS:=+PACKAGE_dnsmasq_full_dnssec:libnettle \
+PACKAGE_dnsmasq_full_ipset:kmod-ipt-ipset \
+PACKAGE_dnsmasq_full_conntrack:libnetfilter-conntrack
VARIANT:=full
endef
define Package/dnsmasq/description
It is intended to provide coupled DNS and DHCP service to a LAN.
endef
define Package/dnsmasq-dhcpv6/description
$(call Package/dnsmasq/description)
This is a variant with DHCPv6 support
endef
define Package/dnsmasq-full/description
$(call Package/dnsmasq/description)
This is a fully configurable variant with DHCPv6, DNSSEC, Authoritative DNS and
IPset, Conntrack support & NO_ID enabled by default.
endef
define Package/dnsmasq/conffiles
/etc/config/dhcp
/etc/dnsmasq.conf
endef
define Package/dnsmasq-full/config
if PACKAGE_dnsmasq-full
config PACKAGE_dnsmasq_full_dhcpv6
bool "Build with DHCPv6 support."
depends on IPV6
default y
config PACKAGE_dnsmasq_full_dnssec
bool "Build with DNSSEC support."
default y
config PACKAGE_dnsmasq_full_auth
bool "Build with the facility to act as an authoritative DNS server."
default y
config PACKAGE_dnsmasq_full_ipset
bool "Build with IPset support."
default y
config PACKAGE_dnsmasq_full_conntrack
bool "Build with Conntrack support."
default y
config PACKAGE_dnsmasq_full_noid
bool "Build with NO_ID. (hide *.bind pseudo domain)"
default y
config PACKAGE_dnsmasq_full_broken_rtc
bool "Build with HAVE_BROKEN_RTC."
default n
endif
endef
Package/dnsmasq-dhcpv6/conffiles = $(Package/dnsmasq/conffiles)
Package/dnsmasq-full/conffiles = $(Package/dnsmasq/conffiles)
TARGET_CFLAGS += -ffunction-sections -fdata-sections
TARGET_LDFLAGS += -Wl,--gc-sections
COPTS = $(if $(CONFIG_IPV6),,-DNO_IPV6)
ifeq ($(BUILD_VARIANT),nodhcpv6)
COPTS += -DNO_DHCP6
endif
ifeq ($(BUILD_VARIANT),full)
COPTS += $(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcpv6),,-DNO_DHCP6) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dnssec),-DHAVE_DNSSEC) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_auth),,-DNO_AUTH) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_ipset),,-DNO_IPSET) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_conntrack),-DHAVE_CONNTRACK,) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_noid),-DNO_ID,) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_broken_rtc),-DHAVE_BROKEN_RTC)
COPTS += $(if $(CONFIG_LIBNETTLE_MINI),-DNO_GMP,)
else
COPTS += -DNO_AUTH -DNO_IPSET -DNO_ID
endif
MAKE_FLAGS := \
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
COPTS="$(COPTS)" \
PREFIX="/usr"
define Package/dnsmasq/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_INSTALL_DIR)/usr/sbin/dnsmasq $(1)/usr/sbin/
$(INSTALL_DIR) $(1)/etc/config
$(INSTALL_DATA) ./files/dhcp.conf $(1)/etc/config/dhcp
$(INSTALL_DATA) ./files/dnsmasq.conf $(1)/etc/dnsmasq.conf
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/dnsmasq.init $(1)/etc/init.d/dnsmasq
$(INSTALL_DIR) $(1)/etc/hotplug.d/ntp
$(INSTALL_DATA) ./files/dnsmasqsec.hotplug $(1)/etc/hotplug.d/ntp/25-dnsmasqsec
endef
Package/dnsmasq-dhcpv6/install = $(Package/dnsmasq/install)
define Package/dnsmasq-full/install
$(call Package/dnsmasq/install,$(1))
ifneq ($(CONFIG_PACKAGE_dnsmasq_full_dnssec),)
$(INSTALL_DIR) $(1)/usr/share/dnsmasq
$(INSTALL_DATA) $(PKG_BUILD_DIR)/trust-anchors.conf $(1)/usr/share/dnsmasq
endif
endef
$(eval $(call BuildPackage,dnsmasq))
$(eval $(call BuildPackage,dnsmasq-dhcpv6))
$(eval $(call BuildPackage,dnsmasq-full))