John Crispin 1aab21df9f ramips: Allow to receive vlan over untag ports on MT7530 ... The MT7530 switch driver with enable_vlan set will automatically set all ports to the user port mode. The hardware will remove the incoming vlan tag on these ports and use it for its internal vlan. This is usually not wanted and makes it impossible to communicate via vlan over the switch in both directions. It is possible to configure a switch port to "transparent mode" when this port is only used as untag in the switch VLANs. This will disable the VLAN untagging of packets when they were received on this port. The tagging on "tag" ports based on the vlan id is still working. The transparent port mode cannot be used when a port is both used in a VLAN as "tag" and in another one as "untag" port. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47114		2015-10-05 10:26:09 +00:00
..
adm5120	adm5120: disable the openwrt commandline hack	2015-08-30 12:17:54 +00:00
adm8668	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
ar7	kernel: update 4.1 to 4.1.10	2015-10-04 11:34:39 +00:00
ar71xx	ar71xx: Correct WeIO board name	2015-10-05 10:25:40 +00:00
arm64	kernel: update 4.1 to 4.1.10	2015-10-04 11:34:39 +00:00
at91	at91: fix usb rate backport patch tab mangle	2015-08-17 16:10:49 +00:00
ath25	ath25: disable the openwrt commandline hack	2015-08-30 12:17:56 +00:00
au1000	image: fix jffs2(_nand) image generation	2015-08-05 13:55:52 +00:00
bcm53xx	kernel: update 4.1 to 4.1.10	2015-10-04 11:34:39 +00:00
brcm47xx	brcm47xx: describe 300-fork_cacheflush.patch & 310-no_highpage.patch	2015-09-27 06:53:12 +00:00
brcm63xx	kernel: update 3.18 to 3.18.21	2015-09-02 10:18:15 +00:00
brcm2708	kernel: update 4.1 to 4.1.10	2015-10-04 11:34:39 +00:00
cns3xxx	kernel: update 3.18 to 3.18.21	2015-09-02 10:18:15 +00:00
gemini	kernel: refresh patches for 4.1	2015-07-22 12:51:11 +00:00
generic	kernel: update 4.1 to 4.1.10	2015-10-04 11:34:39 +00:00
imx6	imx6: disable ext2/ext3 filesystem support (ext4 is enough)	2015-09-24 08:37:35 +00:00
ipq806x	kernel: update 4.1 to 4.1.10	2015-10-04 11:34:39 +00:00
ixp4xx	kernel: update 4.1 to 4.1.5	2015-08-14 13:06:33 +00:00
kirkwood	kirkwood: add wpad-mini to router profiles	2015-08-05 13:56:02 +00:00
lantiq	lantiq: fix binutils 2.15.1 build	2015-10-04 22:03:04 +00:00
malta	malta: disable the openwrt commandline hack	2015-08-30 12:18:05 +00:00
mcs814x	mcs814x: use firmware partition splitter on dLAN USB Extender	2015-08-17 06:16:19 +00:00
mpc85xx	target/mpc85xx: check if 'generic' subtarget for image file cuImage.tl-wdr4900-v1	2015-10-05 10:25:28 +00:00
mvebu	This had been set in r44508 as a workaround for switch problems.	2015-08-21 08:10:48 +00:00
mxs	mxs: fixup permissions of image generation scripts	2015-09-23 18:40:42 +00:00
netlogic	netlogic: copy initramfs image to $(BIN_DIR)	2015-04-23 22:31:36 +00:00
octeon	octeon: fix imagebuilder	2015-05-29 11:28:20 +00:00
omap	omap: add Kernel 4.1	2015-09-21 17:40:52 +00:00
omap24xx	omap24xx: remove obsolete kernel 3.3 patches	2015-09-16 07:56:33 +00:00
orion	kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4	2015-09-08 12:31:04 +00:00
oxnas	kernel: update 4.1 to 4.1.10	2015-10-04 11:34:39 +00:00
ppc40x	ppc40x: upgrade to 3.18	2015-04-12 20:48:13 +00:00
ppc44x	image: fix jffs2(_nand) image generation	2015-08-05 13:55:52 +00:00
pxa	kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED	2015-03-06 07:56:34 +00:00
ramips	ramips: Allow to receive vlan over untag ports on MT7530	2015-10-05 10:26:09 +00:00
rb532	kernel: update 3.18 to 3.18.14	2015-05-21 19:32:46 +00:00
realview	realview: create sd card image for qemu	2015-09-14 20:10:04 +00:00
sunxi	kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4	2015-09-08 12:31:04 +00:00
uml	uml: backport another upstream patch to fix compile errors	2015-09-28 12:22:35 +00:00
x86	x86/geode: enable DMI and Geos support (fixes #20512)	2015-09-17 10:15:52 +00:00
xburst	image: fix jffs2(_nand) image generation	2015-08-05 13:55:52 +00:00
Makefile	Add kernel_nconfig make target	2010-08-06 21:36:35 +00:00