openwrtv3/target/linux/ramips/dts/WZR-AGL300NH.dts
John Crispin 1a392636a5 ramips: use consistent naming scheme for LEDs
The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach.
The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target:
 * fixes wrong indentation
 * keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body)
 * fixes wrong LED names for some of boards (makes them the same as in dts{,i} files)
 * combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds)

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46664
2015-08-17 06:24:34 +00:00

143 lines
2.2 KiB
Text

/dts-v1/;
/include/ "rt2880.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
model = "Buffalo WZR-AGL300NH";
palmbus@300000 {
gpio0: gpio@600 {
status = "okay";
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartlite", "mdio";
ralink,function = "gpio";
};
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
ethernet@400000 {
status = "okay";
mtd-mac-address = <&factory 0x4>;
port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
};
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio0 1 0>;
gpio-sck = <&gpio0 2 0>;
};
wmac@480000 {
ralink,mtd-eeprom = <&factory 0>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
router {
label = "router_switch";
gpios = <&gpio0 7 0>;
linux,code = <0x100>;
};
reset {
label = "reset";
gpios = <&gpio0 9 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
router {
label = "wzr-agl300nh:green:router";
gpios = <&gpio0 8 1>;
};
diag {
label = "wzr-agl300nh:red:diag";
gpios = <&gpio0 12 1>;
};
security_g {
label = "wzr-agl300nh:orange:security_g";
gpios = <&gpio0 11 1>;
};
security_n {
label = "wzr-agl300nh:orange:security_n";
gpios = <&gpio0 13 1>;
};
};
pcibus0: pci@00440000 {
compatible = "ralink,rt288x-pci";
reg = <0x00440000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
status = "ok";
};
};