openwrtv3/target/linux/rb532-2.6/image/Makefile

76 lines
2.3 KiB
Makefile

#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
include $(INCLUDE_DIR)/kernel.mk
LOADADDR = 0x81000000 # RAM start + 16M
KERNEL_ENTRY = 0x80101000
RAMSIZE = 0x00100000 # 1MB
IMAGE_COPY = 1
LOADER_MAKEOPTS= \
KDIR=$(KDIR) \
LOADADDR=$(LOADADDR) \
KERNEL_ENTRY=$(KERNEL_ENTRY) \
RAMSIZE=$(RAMSIZE) \
IMAGE_COPY=$(IMAGE_COPY)
define Build/Clean
$(MAKE) -C ../../generic-2.6/image/lzma-loader $(LOADER_MAKEOPTS) clean
endef
CMDLINE_SIZE=512
CMDLINE_OFFSET=4112
define Image/Prepare
echo 'root=/dev/cfa2 ' | \
dd bs=$(CMDLINE_SIZE) count=1 conv=sync | \
dd of=$(LINUX_DIR)/vmlinux bs=$(CMDLINE_OFFSET) conv=notrunc seek=1
$(KERNEL_CROSS)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUX_DIR)/vmlinux $(LINUX_KERNEL)
endef
define Image/BuildKernel
cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean compile
$(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
endef
PARTITION1=\x80\x01\x01\x00\x27\x01\x20\x7b\x20\x00\x00\x00\xe0\x1e\x00\x00# 4 MB (kernel part)
PARTITION2=\x00\x00\x01\x7c\x83\x01\xa0\x64\x00\x1f\x00\x00\x40\x7a\x00\x00# 16 MB (rootfs part)
define Image/cmdline/jffs2-64k
block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2
endef
define Image/cmdline/jffs2-128k
block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2
endef
define Image/cmdline/ext2
root=/dev/cfa2 rootfstype=ext2
endef
define Image/Build
echo '$(strip $(call Image/cmdline/$(1))) ' | \
dd bs=$(CMDLINE_SIZE) count=1 conv=sync | \
dd of=$(LINUX_DIR)/vmlinux bs=$(CMDLINE_OFFSET) conv=notrunc seek=1
( \
echo -ne OWRT | dd bs=$$$$((0x1be)) conv=sync; \
( \
echo -ne '$(strip $(PARTITION1))'; \
echo -ne '$(strip $(PARTITION2))'; \
) | dd bs=$$$$((0x40)) conv=sync; \
echo -ne '\x55\xaa'; \
dd if=/dev/zero bs=$$$$((0x3e00)) conv=sync count=1; \
dd if=$(LINUX_DIR)/vmlinux bs=$$$$((0x3dc000)) conv=sync; \
cat $(KDIR)/root.$(1); \
echo -ne '\xde\xad\xc0\xde'; \
) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin
endef
$(eval $(call BuildImage))