16b950c981
On the bottom sticker it's branded as ZTE ZXECS EBG3130 device, but in factory
OpenWrt image it's referenced as BDCOM WAP2100-SK device.
Specifications:
- SoC: MediaTek MT7620A
- RAM: 128 MB
- Flash: 16 MB
- Ethernet: 5 FE ports
- Wireless radio: 2T2R 2.4 GHz and 1T1R 5 GHz (MT7610EN, unsupported)
- UART: 1 x UART on PCB marked as J2 (R=RX, T=TX, G=GND) with 115200 8N1 config
- LEDs: Power, FE ports 1-5, WPS, USB, RF 2.4G, RF 5G
- Other: USB port, SD card slot and 2x external antennas (non-detachable)
Flashing instructions:
A) The U-Boot has HTTP based firmware upgrade
A1) Flashing notes
We've identified so far two different batches of units, unfortunately
each batch has different U-Boot bootloader flashed with different
default environment variables, thus each batch has different IP address
for accessing web based firmware updater.
* First batch has web based bootloader IP address 1.1.1.1
* Second batch has web based bootloader IP address 192.168.1.250
In case you can't connect to either of those IPs, you can try to get
the default IP address via two methods:
A1.1) Serial console, then the IP address is visible during the boot
...
HTTP server is starting at IP: 1.1.1.1
raspi_read: from:40004 len:6
HTTP server is ready!
...
A1.2) Over telnet/SSH using this command:
root@bdcom:/# grep ipaddr= /dev/mtd0
ipaddr=1.1.1.1
A2) Flashing with browser
* Change IP address of PC to 1.1.1.2 with 255.255.255.0 netmask
* Reboot the device and try to reach web based bootloader in the
browser with the following URL http://1.1.1.1
* Quickly select the firmware sysupgrade file and click on the
`Update firmware` button, this all has to be done within 10 seconds,
bootloader doesn't wait any longer
If done correctly, the web page should show UPDATE IN PROGRESS page
with progress indicator. Once the flashing completes (it takes roughly
around 1 minute), the device will reboot to the OpenWrt firmware
A3) Flashing with curl
sudo ip addr add 1.1.1.2/24 dev eth0
curl \
--verbose \
--retry 3 \
--retry-delay 1 \
--retry-max-time 30 \
--connect-timeout 30 \
--form "firmware=@openwrt-ramips-mt7620-BDCOM-WAP2100-SK-squashfs-sysupgrade.bin" \
http://1.1.1.1
Now power on the router.
B) The U-boot is based on Ralink SDK so we can flash the firmware using UART.
1. Configure PC with a static IP address and setup an TFTP server.
2. Put the firmware into the tftp directory.
3. Connect the UART line as described on the PCB (G=GND, R=RX, T=TX)
4. Power up the device and press 2, follow the instruction to set device and
tftp server IP address and input the firmware file name. U-boot will then load
the firmware and write it into the flash.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
623 lines
12 KiB
Bash
Executable file
623 lines
12 KiB
Bash
Executable file
#!/bin/sh
|
|
|
|
. /lib/functions.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/functions/system.sh
|
|
|
|
ramips_setup_rt3x5x_vlans()
|
|
{
|
|
if [ ! -x /sbin/swconfig ]; then
|
|
# legacy default
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
return
|
|
fi
|
|
local wanports=""
|
|
local lanports=""
|
|
for port in 5 4 3 2 1 0; do
|
|
if [ `swconfig dev rt305x port $port get disable` = "1" ]; then
|
|
continue
|
|
fi
|
|
if [ `swconfig dev rt305x port $port get lan` = "0" ]; then
|
|
wanports="$port:wan $wanports"
|
|
else
|
|
lanports="$port:lan $lanports"
|
|
fi
|
|
done
|
|
ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0"
|
|
}
|
|
|
|
ramips_setup_interfaces()
|
|
{
|
|
local board="$1"
|
|
|
|
case $board in
|
|
11acnas|\
|
|
w2914nsv2|\
|
|
zbt-we2026)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
|
|
;;
|
|
3g150b|\
|
|
3g300m|\
|
|
a5-v11|\
|
|
all0256n-4M|\
|
|
all0256n-8M|\
|
|
all5002|\
|
|
all5003|\
|
|
bocco|\
|
|
broadway|\
|
|
dcs-930|\
|
|
dcs-930l-b1|\
|
|
ht-tm02|\
|
|
kimax,u35wf|\
|
|
linkits7688 | \
|
|
m2m|\
|
|
microwrt|\
|
|
mikrotik,rbm11g|\
|
|
mpr-a2|\
|
|
ncs601w|\
|
|
omega2 | \
|
|
omega2p | \
|
|
timecloud|\
|
|
tplink,tl-wa801nd-v5|\
|
|
w150m|\
|
|
widora,neo-16m|\
|
|
widora,neo-32m|\
|
|
wnce2001|\
|
|
zbt-cpe102|\
|
|
zorlik,zl5900v2|\
|
|
zte-q7)
|
|
ucidef_add_switch "switch0"
|
|
ucidef_add_switch_attr "switch0" "enable" "false"
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
mlw221|\
|
|
mr-102n)
|
|
ucidef_set_interface_lan "eth0.2"
|
|
;;
|
|
3g-6200n|\
|
|
ai-br100|\
|
|
alfa-network,ac1200rm|\
|
|
mediatek,ap-mt7621a-v60|\
|
|
d240|\
|
|
db-wrt01|\
|
|
dir-300-b7|\
|
|
dir-320-b1|\
|
|
dir-610-a1|\
|
|
dir-615-h1|\
|
|
dir-810l|\
|
|
dlink,dwr-116-a1|\
|
|
dlink,dwr-921-c1|\
|
|
ew1200|\
|
|
firewrt|\
|
|
hc5661a|\
|
|
hc5962|\
|
|
hlk-rm04|\
|
|
k2p|\
|
|
kn|\
|
|
kn_rc|\
|
|
mac1200rv2|\
|
|
miwifi-mini|\
|
|
miwifi-nano|\
|
|
mt7621|\
|
|
mt7628|\
|
|
mzk-750dhp|\
|
|
mzk-w300nh2|\
|
|
d-team,newifi-d2|\
|
|
netgear,r6120|\
|
|
nixcore-x1-8M|\
|
|
nixcore-x1-16M|\
|
|
oy-0001|\
|
|
pbr-m1|\
|
|
psg1208|\
|
|
psg1218a|\
|
|
r6220|\
|
|
rt-n12p|\
|
|
sap-g3200u3|\
|
|
sk-wb8|\
|
|
u7621-06-256M-16M|\
|
|
vr500|\
|
|
wf-2881|\
|
|
whr-g300n|\
|
|
mqmaker,witi-256m|\
|
|
mqmaker,witi-512m|\
|
|
wl-wn575a3|\
|
|
wndr3700v5|\
|
|
youku-yk1|\
|
|
zbt-ape522ii|\
|
|
zbt-we1326|\
|
|
zbtlink,zbt-we3526|\
|
|
zbt-we826-16M|\
|
|
zbt-we826-32M|\
|
|
zbt-wg2626|\
|
|
zbt-wg3526-16M|\
|
|
zbt-wg3526-32M|\
|
|
zbt-wr8305rt)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
|
;;
|
|
alfa-network,awusfree1|\
|
|
cs-qr10|\
|
|
d105|\
|
|
dlink,dap-1522-a1|\
|
|
dch-m225|\
|
|
ex2700|\
|
|
ex3700|\
|
|
hpm|\
|
|
mzk-ex300np|\
|
|
mzk-ex750np|\
|
|
na930|\
|
|
pbr-d1|\
|
|
ravpower,wd03|\
|
|
tama,w06|\
|
|
tplink,tl-mr3020-v3|\
|
|
u25awf-h1|\
|
|
wli-tx4-ag300n|\
|
|
wmdr-143n|\
|
|
wmr-300|\
|
|
wn3000rpv3|\
|
|
wrh-300cr)
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
dlink,dwr-118-a2)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
|
|
;;
|
|
mir3g)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
|
|
;;
|
|
psg1218b)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
|
|
;;
|
|
whr-300hp2|\
|
|
whr-600d|\
|
|
wsr-1166|\
|
|
wsr-600)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
|
|
;;
|
|
ar670w|\
|
|
ar725w|\
|
|
rt-ac51u)
|
|
ucidef_add_switch "switch0" \
|
|
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
|
|
;;
|
|
rt-n15|\
|
|
wl-351)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
|
|
;;
|
|
asl26555-8M|\
|
|
asl26555-16M|\
|
|
rp-n53)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
|
|
;;
|
|
atp-52b|\
|
|
awm002-evb-4M|\
|
|
awm002-evb-8M|\
|
|
c20i|\
|
|
dir-645|\
|
|
gl-mt300a|\
|
|
gl-mt300n|\
|
|
gl-mt750|\
|
|
hg255d|\
|
|
hiwifi,hc5861b|\
|
|
jhr-n805r|\
|
|
jhr-n825r|\
|
|
jhr-n926r|\
|
|
mikrotik,rbm33g|\
|
|
mzk-wdpr|\
|
|
rb750gr3|\
|
|
rt-n14u|\
|
|
tplink,c20-v4|\
|
|
tplink,c50-v3|\
|
|
tplink,tl-mr3420-v5|\
|
|
tplink,tl-wr842n-v5|\
|
|
tl-wr840n-v4|\
|
|
tl-wr840n-v5|\
|
|
tl-wr841n-v13|\
|
|
u7628-01-128M-16M|\
|
|
ubnt-erx|\
|
|
ubnt-erx-sfp|\
|
|
ur-326n4g|\
|
|
wap2100-sk|\
|
|
wrtnode|\
|
|
wrtnode2p | \
|
|
wrtnode2r | \
|
|
youhua,wr1200js|\
|
|
zbt-wa05|\
|
|
zyxel,keenetic-extra-ii)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
|
|
;;
|
|
c50|\
|
|
tplink,c20-v1)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
|
|
;;
|
|
dir-860l-b1|\
|
|
elecom,wrc-1167ghbk2-s|\
|
|
elecom,wrc-2533gst|\
|
|
elecom,wrc-1900gst|\
|
|
iodata,wn-ax1167gr|\
|
|
iodata,wn-gx300gr)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
|
|
;;
|
|
gnubee,gb-pc1|\
|
|
gnubee,gb-pc2)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "4:lan" "6@eth0"
|
|
;;
|
|
gl-mt300n-v2)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "0:wan" "6@eth0"
|
|
;;
|
|
awapn2403)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:wan" "6@eth0"
|
|
;;
|
|
b2c|\
|
|
nw718|\
|
|
psr-680w|\
|
|
sl-r7205|\
|
|
ur-336un|\
|
|
w502u|\
|
|
wr6202)
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
;;
|
|
br-6475nd)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
|
|
;;
|
|
c108|\
|
|
cf-wr800n)
|
|
ucidef_add_switch "switch0" \
|
|
"4:lan" "6t@eth0"
|
|
;;
|
|
cy-swr1100)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
|
|
;;
|
|
duzun-dm06)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "0:wan" "6@eth0"
|
|
;;
|
|
e1700|\
|
|
mt7620a_mt7530)
|
|
ucidef_add_switch "switch1" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
|
;;
|
|
edimax,br-6478ac-v2|\
|
|
tplink,c2-v1)
|
|
ucidef_add_switch "switch1" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
|
|
;;
|
|
hc5*61|\
|
|
y1s)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
|
|
;;
|
|
kn_rf)
|
|
ucidef_add_switch "switch0" \
|
|
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
|
|
;;
|
|
kng_rc)
|
|
ucidef_add_switch "switch1" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
|
|
;;
|
|
mlwg2|\
|
|
wizard8800|\
|
|
wl-330n)
|
|
ucidef_set_interface_lan "eth0.1"
|
|
;;
|
|
mr200)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
|
|
ucidef_set_interface_wan "usb0"
|
|
;;
|
|
mzk-dp150n|\
|
|
vocore-8M|\
|
|
vocore-16M)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "4:lan" "6t@eth0"
|
|
;;
|
|
newifi-d1)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:2" "2:lan:1" "4:wan" "6@eth0"
|
|
;;
|
|
phicomm,k2g)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
|
|
;;
|
|
re350-v1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "6@eth0"
|
|
;;
|
|
re6500)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
|
|
;;
|
|
rt-n56u)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
|
|
;;
|
|
skw92a)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
|
|
;;
|
|
tew-638apb-v2)
|
|
ucidef_add_switch "switch0" \
|
|
"4:lan" "6@eth0"
|
|
;;
|
|
tew-691gr|\
|
|
tew-692gr|\
|
|
wlr-6000)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
|
|
;;
|
|
tplink,tl-wr902ac-v3)
|
|
ucidef_add_switch "switch0" \
|
|
"4:lan" "6@eth0"
|
|
;;
|
|
vonets,var11n-300|\
|
|
wt1520-4M|\
|
|
wt1520-8M)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "4:wan" "6@eth0"
|
|
;;
|
|
vocore2|\
|
|
vocore2lite)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "2:lan" "6t@eth0"
|
|
;;
|
|
f5d8235-v1|\
|
|
f5d8235-v2|\
|
|
tew-714tru|\
|
|
v11st-fe|\
|
|
wzr-agl300nh)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
|
|
;;
|
|
wcr-1166ds)
|
|
ucidef_add_switch "switch0" \
|
|
"3:lan" "4:wan" "6@eth0"
|
|
;;
|
|
wcr-150gn|\
|
|
we1026-5g-16m)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "6t@eth0"
|
|
;;
|
|
whr-1166d)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0"
|
|
;;
|
|
wizfi630a)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:wan" "6@eth0"
|
|
;;
|
|
wt3020-4M|\
|
|
wt3020-8M)
|
|
ucidef_add_switch "switch0" \
|
|
"4:lan" "0:wan" "6@eth0"
|
|
;;
|
|
zbtlink,zbt-we1226|\
|
|
y1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:2" "1:lan:1" "4:wan" "6@eth0"
|
|
;;
|
|
*)
|
|
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
|
|
if [ -n "${RT3X5X}" ]; then
|
|
ramips_setup_rt3x5x_vlans
|
|
else
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
fi
|
|
;;
|
|
esac
|
|
}
|
|
|
|
ramips_setup_macs()
|
|
{
|
|
local board="$1"
|
|
local lan_mac=""
|
|
local wan_mac=""
|
|
|
|
case $board in
|
|
a5-v11|\
|
|
ht-tm02|\
|
|
wmdr-143n)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
;;
|
|
all0239-3g|\
|
|
carambola|\
|
|
freestation5|\
|
|
w502u|\
|
|
wnce2001)
|
|
wan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
bc2|\
|
|
broadway|\
|
|
d105|\
|
|
dir-300-b7|\
|
|
dir-320-b1|\
|
|
dir-620-a1|\
|
|
esr-9753|\
|
|
freestation5|\
|
|
hlk-rm04|\
|
|
mpr-a1|\
|
|
psr-680w|\
|
|
sl-r7205|\
|
|
y1|\
|
|
y1s)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_setbit_la "$lan_mac")
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
;;
|
|
br-6475nd)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(mtd_get_mac_binary devdata 7)
|
|
;;
|
|
cy-swr1100|\
|
|
dch-m225)
|
|
lan_mac=$(mtd_get_mac_ascii factory lanmac)
|
|
;;
|
|
dir-645)
|
|
lan_mac=$(mtd_get_mac_ascii nvram lanmac)
|
|
wan_mac=$(mtd_get_mac_ascii nvram wanmac)
|
|
;;
|
|
dir-860l-b1)
|
|
lan_mac=$(mtd_get_mac_ascii factory lanmac)
|
|
wan_mac=$(mtd_get_mac_ascii factory wanmac)
|
|
;;
|
|
dlink,dwr-116-a1|\
|
|
dlink,dwr-118-a2|\
|
|
dlink,dwr-921-c1)
|
|
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
|
|
lan_mac=$(macaddr_add "$wan_mac" 1)
|
|
;;
|
|
e1700)
|
|
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
|
|
;;
|
|
edimax,br-6478ac-v2)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(macaddr_add "$lan_mac" 2)
|
|
;;
|
|
elecom,wrc-1167ghbk2-s|\
|
|
elecom,wrc-2533gst|\
|
|
elecom,wrc-1900gst|\
|
|
sk-wb8)
|
|
wan_mac=$(mtd_get_mac_binary factory 57350)
|
|
;;
|
|
gl-mt300n-v2|\
|
|
whr-g300n)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
;;
|
|
hc5*61|\
|
|
hc5661a|\
|
|
hc5962|\
|
|
hiwifi,hc5861b)
|
|
lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
|
|
[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
;;
|
|
iodata,wn-ax1167gr|\
|
|
iodata,wn-gx300gr)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
|
|
;;
|
|
kn_rc|\
|
|
kn_rf|\
|
|
kng_rc)
|
|
wan_mac=$(mtd_get_mac_binary factory 40)
|
|
;;
|
|
linkits7688)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
lan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
mac1200rv2)
|
|
lan_mac=$(mtd_get_mac_binary factory_info 13)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
;;
|
|
mir3g)
|
|
lan_mac=$(mtd_get_mac_binary Factory 0xe006)
|
|
;;
|
|
miwifi-mini)
|
|
wan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_setbit_la "$wan_mac")
|
|
;;
|
|
m3|\
|
|
m4-4M|\
|
|
m4-8M|\
|
|
x5|\
|
|
x8)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_add "$lan_mac" -2)
|
|
;;
|
|
newifi-d1)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_add "$lan_mac" 2)
|
|
;;
|
|
omega2|\
|
|
omega2p)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
lan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
oy-0001|\
|
|
phicomm,k2g)
|
|
lan_mac=$(mtd_get_mac_binary factory 40)
|
|
wan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
r6220)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
lan_mac=$(macaddr_add "$wan_mac" 1)
|
|
;;
|
|
rt-n56u)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_setbit_la "$lan_mac")
|
|
wan_mac=$(mtd_get_mac_binary factory 32772)
|
|
;;
|
|
skw92a)
|
|
lan_mac=$(mtd_get_mac_binary factory 40)
|
|
wan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
tew-691gr)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
|
|
;;
|
|
tew-692gr)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1)
|
|
;;
|
|
tiny-ac)
|
|
lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
|
|
wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
|
|
;;
|
|
vr500)
|
|
lan_mac=$(mtd_get_mac_binary factory 57344)
|
|
wan_mac=$(mtd_get_mac_binary factory 57350)
|
|
;;
|
|
w306r-v20)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(macaddr_add "$lan_mac" 5)
|
|
;;
|
|
wcr-1166ds|\
|
|
wsr-1166)
|
|
local index="$(find_mtd_index "board_data")"
|
|
wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
|
|
lan_mac=$wan_mac
|
|
;;
|
|
wcr-150gn)
|
|
wan_mac=$(mtd_get_mac_binary factory 40)
|
|
;;
|
|
whr-1166d|\
|
|
whr-300hp2|\
|
|
whr-600d|\
|
|
wsr-600)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
lan_mac=$wan_mac
|
|
;;
|
|
wizfi630a)
|
|
lan_mac=$(mtd_get_mac_binary factory 4)
|
|
wan_mac=$(mtd_get_mac_binary factory 40)
|
|
;;
|
|
wlr-6000)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
|
|
;;
|
|
*)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
;;
|
|
esac
|
|
|
|
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
|
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
|
|
}
|
|
|
|
board_config_update
|
|
board=$(board_name)
|
|
ramips_setup_interfaces $board
|
|
ramips_setup_macs $board
|
|
board_config_flush
|
|
|
|
exit 0
|