5e49c57956
1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
206 lines
5.9 KiB
Diff
206 lines
5.9 KiB
Diff
Content-Type: text/plain; charset="utf-8"
|
|
MIME-Version: 1.0
|
|
Content-Transfer-Encoding: 7bit
|
|
Subject: [v3,06/13] clk: qcom: Add HFPLL driver
|
|
From: Stephen Boyd <sboyd@codeaurora.org>
|
|
X-Patchwork-Id: 6063231
|
|
Message-Id: <1426920332-9340-7-git-send-email-sboyd@codeaurora.org>
|
|
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
|
|
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
|
|
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
|
|
Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
|
|
Date: Fri, 20 Mar 2015 23:45:25 -0700
|
|
|
|
On some devices (MSM8974 for example), the HFPLLs are
|
|
instantiated within the Krait processor subsystem as separate
|
|
register regions. Add a driver for these PLLs so that we can
|
|
provide HFPLL clocks for use by the system.
|
|
|
|
Cc: <devicetree@vger.kernel.org>
|
|
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
|
|
---
|
|
.../devicetree/bindings/clock/qcom,hfpll.txt | 40 ++++++++
|
|
drivers/clk/qcom/Kconfig | 8 ++
|
|
drivers/clk/qcom/Makefile | 1 +
|
|
drivers/clk/qcom/hfpll.c | 109 +++++++++++++++++++++
|
|
4 files changed, 158 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
|
|
create mode 100644 drivers/clk/qcom/hfpll.c
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
|
|
@@ -0,0 +1,40 @@
|
|
+High-Frequency PLL (HFPLL)
|
|
+
|
|
+PROPERTIES
|
|
+
|
|
+- compatible:
|
|
+ Usage: required
|
|
+ Value type: <string>
|
|
+ Definition: must be "qcom,hfpll"
|
|
+
|
|
+- reg:
|
|
+ Usage: required
|
|
+ Value type: <prop-encoded-array>
|
|
+ Definition: address and size of HPLL registers. An optional second
|
|
+ element specifies the address and size of the alias
|
|
+ register region.
|
|
+
|
|
+- clock-output-names:
|
|
+ Usage: required
|
|
+ Value type: <string>
|
|
+ Definition: Name of the PLL. Typically hfpllX where X is a CPU number
|
|
+ starting at 0. Otherwise hfpll_Y where Y is more specific
|
|
+ such as "l2".
|
|
+
|
|
+Example:
|
|
+
|
|
+1) An HFPLL for the L2 cache.
|
|
+
|
|
+ clock-controller@f9016000 {
|
|
+ compatible = "qcom,hfpll";
|
|
+ reg = <0xf9016000 0x30>;
|
|
+ clock-output-names = "hfpll_l2";
|
|
+ };
|
|
+
|
|
+2) An HFPLL for CPU0. This HFPLL has the alias register region.
|
|
+
|
|
+ clock-controller@f908a000 {
|
|
+ compatible = "qcom,hfpll";
|
|
+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
|
|
+ clock-output-names = "hfpll0";
|
|
+ };
|
|
--- a/drivers/clk/qcom/Kconfig
|
|
+++ b/drivers/clk/qcom/Kconfig
|
|
@@ -106,3 +106,11 @@
|
|
Support for the multimedia clock controller on msm8974 devices.
|
|
Say Y if you want to support multimedia devices such as display,
|
|
graphics, video encode/decode, camera, etc.
|
|
+
|
|
+config QCOM_HFPLL
|
|
+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
|
|
+ depends on COMMON_CLK_QCOM
|
|
+ help
|
|
+ Support for the high-frequency PLLs present on Qualcomm devices.
|
|
+ Say Y if you want to support CPU frequency scaling on devices
|
|
+ such as MSM8974, APQ8084, etc.
|
|
--- a/drivers/clk/qcom/Makefile
|
|
+++ b/drivers/clk/qcom/Makefile
|
|
@@ -23,3 +23,4 @@
|
|
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
|
|
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
|
|
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
|
|
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
|
|
--- /dev/null
|
|
+++ b/drivers/clk/qcom/hfpll.c
|
|
@@ -0,0 +1,109 @@
|
|
+/*
|
|
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 and
|
|
+ * only version 2 as published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/clk-provider.h>
|
|
+#include <linux/regmap.h>
|
|
+
|
|
+#include "clk-regmap.h"
|
|
+#include "clk-hfpll.h"
|
|
+
|
|
+static const struct hfpll_data hdata = {
|
|
+ .mode_reg = 0x00,
|
|
+ .l_reg = 0x04,
|
|
+ .m_reg = 0x08,
|
|
+ .n_reg = 0x0c,
|
|
+ .user_reg = 0x10,
|
|
+ .config_reg = 0x14,
|
|
+ .config_val = 0x430405d,
|
|
+ .status_reg = 0x1c,
|
|
+ .lock_bit = 16,
|
|
+
|
|
+ .user_val = 0x8,
|
|
+ .user_vco_mask = 0x100000,
|
|
+ .low_vco_max_rate = 1248000000,
|
|
+ .min_rate = 537600000UL,
|
|
+ .max_rate = 2900000000UL,
|
|
+};
|
|
+
|
|
+static const struct of_device_id qcom_hfpll_match_table[] = {
|
|
+ { .compatible = "qcom,hfpll" },
|
|
+ { }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
|
|
+
|
|
+static const struct regmap_config hfpll_regmap_config = {
|
|
+ .reg_bits = 32,
|
|
+ .reg_stride = 4,
|
|
+ .val_bits = 32,
|
|
+ .max_register = 0x30,
|
|
+ .fast_io = true,
|
|
+};
|
|
+
|
|
+static int qcom_hfpll_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct clk *clk;
|
|
+ struct resource *res;
|
|
+ struct device *dev = &pdev->dev;
|
|
+ void __iomem *base;
|
|
+ struct regmap *regmap;
|
|
+ struct clk_hfpll *h;
|
|
+ struct clk_init_data init = {
|
|
+ .parent_names = (const char *[]){ "xo" },
|
|
+ .num_parents = 1,
|
|
+ .ops = &clk_ops_hfpll,
|
|
+ };
|
|
+
|
|
+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
|
|
+ if (!h)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ base = devm_ioremap_resource(dev, res);
|
|
+ if (IS_ERR(base))
|
|
+ return PTR_ERR(base);
|
|
+
|
|
+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
|
|
+ if (IS_ERR(regmap))
|
|
+ return PTR_ERR(regmap);
|
|
+
|
|
+ if (of_property_read_string_index(dev->of_node, "clock-output-names",
|
|
+ 0, &init.name))
|
|
+ return -ENODEV;
|
|
+
|
|
+ h->d = &hdata;
|
|
+ h->clkr.hw.init = &init;
|
|
+ spin_lock_init(&h->lock);
|
|
+
|
|
+ clk = devm_clk_register_regmap(&pdev->dev, &h->clkr);
|
|
+
|
|
+ return PTR_ERR_OR_ZERO(clk);
|
|
+}
|
|
+
|
|
+static struct platform_driver qcom_hfpll_driver = {
|
|
+ .probe = qcom_hfpll_probe,
|
|
+ .driver = {
|
|
+ .name = "qcom-hfpll",
|
|
+ .of_match_table = qcom_hfpll_match_table,
|
|
+ },
|
|
+};
|
|
+module_platform_driver(qcom_hfpll_driver);
|
|
+
|
|
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
|
|
+MODULE_LICENSE("GPL v2");
|
|
+MODULE_ALIAS("platform:qcom-hfpll");
|