openwrtv3/target/linux/ipq806x/patches-4.1/710-stmmac-fix-ipq806x-DMA-configuration.patch
Felix Fietkau c52d6d4f45 ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47603
2015-11-22 21:59:22 +00:00

117 lines
3.8 KiB
Diff

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -259,6 +259,7 @@ static int ipq806x_gmac_probe(struct pla
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
+ struct stmmac_dma_cfg *dma_cfg;
struct device *dev = &pdev->dev;
struct ipq806x_gmac *gmac;
int val;
@@ -348,6 +349,17 @@ static int ipq806x_gmac_probe(struct pla
plat_dat->bsp_priv = gmac;
plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
+ dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
+ GFP_KERNEL);
+
+ dma_cfg->pbl = 32;
+ dma_cfg->aal = 1;
+ dma_cfg->burst_len = DMA_AXI_BLEN_16 |
+ (7 << DMA_AXI_RD_OSR_LMT_SHIFT) |
+ (7 << DMA_AXI_WR_OSR_LMT_SHIFT);
+
+ plat_dat->dma_cfg = dma_cfg;
+
return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -73,6 +73,9 @@
| DMA_AXI_BLEN_32 | DMA_AXI_BLEN_64 \
| DMA_AXI_BLEN_128 | DMA_AXI_BLEN_256)
+#define DMA_AXI_RD_OSR_LMT_SHIFT 16
+#define DMA_AXI_WR_OSR_LMT_SHIFT 20
+
/* Platfrom data for platform device structure's platform_data field */
struct stmmac_mdio_bus_data {
@@ -88,6 +91,7 @@ struct stmmac_mdio_bus_data {
struct stmmac_dma_cfg {
int pbl;
+ int aal;
int fixed_burst;
int mixed_burst;
int burst_len;
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -31,7 +31,8 @@
#include "dwmac_dma.h"
static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds,
+ int aal)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int limit;
@@ -62,6 +63,10 @@ static int dwmac1000_dma_init(void __iom
value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
(pbl << DMA_BUS_MODE_RPBL_SHIFT));
+ /* Address Aligned Beats */
+ if (aal)
+ value |= DMA_BUS_MODE_AAL;
+
/* Set the Fixed burst mode */
if (fb)
value |= DMA_BUS_MODE_FB;
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -352,7 +352,7 @@ extern const struct stmmac_desc_ops ndes
struct stmmac_dma_ops {
/* DMA core initialization */
int (*init) (void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds);
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds, int aal);
/* Dump DMA registers */
void (*dump_regs) (void __iomem *ioaddr);
/* Set tx/rx threshold in the csr6 register
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -33,7 +33,8 @@
#include "dwmac_dma.h"
static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds,
+ int aal)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int limit;
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1639,9 +1639,11 @@ static int stmmac_init_dma_engine(struct
int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0;
int mixed_burst = 0;
int atds = 0;
+ int aal = 0;
if (priv->plat->dma_cfg) {
pbl = priv->plat->dma_cfg->pbl;
+ aal = priv->plat->dma_cfg->aal;
fixed_burst = priv->plat->dma_cfg->fixed_burst;
mixed_burst = priv->plat->dma_cfg->mixed_burst;
burst_len = priv->plat->dma_cfg->burst_len;
@@ -1652,7 +1654,7 @@ static int stmmac_init_dma_engine(struct
return priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
burst_len, priv->dma_tx_phy,
- priv->dma_rx_phy, atds);
+ priv->dma_rx_phy, atds, aal);
}
/**