No description
Find a file
Gabor Juhos 1167f92ac6 ag71xx: add F1E specific feature bit definitions to AR934X register file
The F1E Phy (AR8035?) requires additional bits to be
set in order to provide a fast and reliable connection
over gigabit links.

When enabled, the link doesn't suffer anymore from a small
package loss under load and the performance is improved
quite a bit as well. (203 mbit/s vs 112 mbit/s, iperf tcp).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4460/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38948
2013-11-29 20:18:43 +00:00
config move menuconfig options into separate files 2013-11-22 14:30:40 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options. 2013-11-29 10:59:51 +00:00
package FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options. 2013-11-29 10:59:51 +00:00
scripts add a feature flag for device tree support 2013-11-22 12:01:01 +00:00
target ag71xx: add F1E specific feature bit definitions to AR934X register file 2013-11-29 20:18:43 +00:00
toolchain enable using soft-float regardless of having a fpu 2013-11-29 09:24:07 +00:00
tools tools/mpfr: add GNU source 2013-11-25 14:09:24 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in move menuconfig options into separate files 2013-11-22 14:30:40 +00:00
feeds.conf.default feeds.conf.default: switch packages feed to git (#13818) 2013-07-05 02:04:40 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: it is no longer necessary to call make target/linux/clean as part of make clean 2012-12-02 15:26:28 +00:00
README build: BSD compile fixes 2013-03-07 17:32:29 +00:00
rules.mk FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options. 2013-11-29 10:59:51 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org