openwrtv3/target/linux/ramips/dts/AR670W.dts
John Crispin 553fea9f19 ramips: fix indentation and other mistakes in .dts{, i} files
The following patch fixes:
 * wrong indentations
 * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1)
 * duplicate spacings
 * empty lines at end of files and after last child nodes
 * trailing and leading whitespace
 * unnecessary and commented-out code
 * missing empty lines between nodes and between properties and nodes
 * unnecessary empty lines between nodes properties [1]

in .dts{,i} files, for ramips target.

[1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?).

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46613
2015-08-17 05:57:18 +00:00

105 lines
1.5 KiB
Text

/dts-v1/;
/include/ "rt2880.dtsi"
/ {
compatible = "AR670W", "ralink,rt2880-soc";
model = "Airlink101 AR670W";
palmbus@300000 {
gpio0: gpio@600 {
status = "okay";
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi", "uartlite";
ralink,function = "gpio";
};
};
};
ethernet@400000 {
status = "okay";
mtd-mac-address = <&factory 0x2004>;
port@0 {
phy-handle = <&phy0>;
phy-mode = "mii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
};
};
};
wmac@480000 {
status = "okay";
ralink,mtd-eeprom = <&factory 0x2000>;
};
cfi@bdc00000 {
compatible = "cfi-flash";
reg = <0xbc400000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
u-boot@0 {
reg = <0x0 0x30000>;
label = "u-boot";
read-only;
};
factory: factory@30000 {
reg = <0x30000 0x10000>;
label = "factory";
read-only;
};
firmware@40000 {
reg = <0x40000 0x3c0000>;
label = "firmware";
};
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "ar670w:green:power";
gpios = <&gpio0 7 1>;
};
wpsblue {
label = "ar670w:blue:wps";
gpios = <&gpio0 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio0 9 1>;
linux,code = <0x198>;
};
};
};