openwrtv3/target/linux/ath79/image/generic-ubnt.mk
Mathias Kresin 0ff5785c5d ath79: fix dts files
Add the SoC compatible to the individual dts files. Rename the dts files
to match the common pattern.

Remove dts files wich aren't used and no image in ar71xx exists.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-05-17 07:40:19 +02:00

275 lines
7.3 KiB
Makefile

DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
-$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@
endef
# all UBNT XM device expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
-[ -f $@ ] && ( \
dd if=$@ of=$@.old1 bs=1024k count=1; \
dd if=$@ of=$@.old2 bs=1024k skip=1; \
$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $@.old1 \
-r $@.old2 \
-o $@; \
rm $@.old1 $@.old2 )
endef
define Build/mkubntimage2
-$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-p jffs2:0x50000:0xf60000:0:0:$@ \
-o $@.new
@mv $@.new $@
endef
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
define Device/ubnt
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
UBNT_BOARD := XM
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
endef
define Device/ubnt-xm
$(Device/ubnt)
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ohci
UBNT_TYPE := XM
UBNT_CHIP := ar7240
ATH_SOC := ar7241
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
endef
define Device/ubnt-xw
$(Device/ubnt)
UBNT_TYPE := XW
UBNT_CHIP := ar934x
endef
define Device/ubnt-bz
$(Device/ubnt)
UBNT_TYPE := BZ
UBNT_CHIP := ar7240
endef
define Device/rw2458n
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti RW2458N
BOARDNAME := RW2458N
endef
#TARGET_DEVICES += rw2458n
define Device/ubnt-airrouter
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti AirRouter
BOARDNAME := UBNT-AR
endef
#TARGET_DEVICES += ubnt-airrouter
define Device/ubnt_bullet-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Bullet-M
BOARDNAME := UBNT-BM
endef
TARGET_DEVICES += ubnt_bullet-m
define Device/ubnt_rocket-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Rocket-M
BOARDNAME := UBNT-RM
endef
TARGET_DEVICES += ubnt_rocket-m
define Device/ubnt_nano-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Nano-M
BOARDNAME := UBNT-NM
endef
TARGET_DEVICES += ubnt_nano-m
define Device/ubnt_unifi
$(Device/ubnt-bz)
ATH_SOC := ar7241
DEVICE_TITLE := Ubiquiti UniFi
BOARDNAME := UBNT-UF
DEVICE_PROFILE += UBNTUNIFI
endef
TARGET_DEVICES += ubnt_unifi
define Device/ubnt-unifiac
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7744k
MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-unifiac-lite
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Lite
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
DEVICE_PROFILE += UBNTUNIFIACLITE
BOARDNAME := UBNT-UF-AC-LITE
endef
#TARGET_DEVICES += ubnt-unifiac-lite
define Device/ubnt-unifiac-mesh
$(Device/ubnt-unifiac-lite)
DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
endef
#TARGET_DEVICES += ubnt-unifiac-mesh
define Device/ubnt-unifiac-pro
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
DEVICE_PROFILE += UBNTUNIFIACPRO
BOARDNAME := UBNT-UF-AC-PRO
endef
#TARGET_DEVICES += ubnt-unifiac-pro
define Device/ubnt-unifi-outdoor
$(Device/ubnt-bz)
DEVICE_TITLE := Ubiquiti UniFi Outdoor
BOARDNAME := UBNT-U20
DEVICE_PROFILE += UBNTUNIFIOUTDOOR
endef
#TARGET_DEVICES += ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Nano M XW
BOARDNAME := UBNT-NM-XW
endef
#TARGET_DEVICES += ubnt-nano-m-xw
define Device/ubnt-loco-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Loco XW
BOARDNAME := UBNT-LOCO-XW
endef
#TARGET_DEVICES += ubnt-loco-m-xw
define Device/ubnt-rocket-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Rocket M XW
BOARDNAME := UBNT-RM-XW
endef
#TARGET_DEVICES += ubnt-rocket-m-xw
define Device/ubnt-rocket-m-ti
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Rocket M TI
BOARDNAME := UBNT-RM-TI
UBNT_TYPE := TI
endef
#TARGET_DEVICES += ubnt-rocket-m-ti
define Device/ubnt-air-gateway
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Air Gateway
BOARDNAME := UBNT-AGW
UBNT_TYPE := AirGW
UBNT_CHIP := ar933x
CONSOLE := ttyATH0,115200
endef
#TARGET_DEVICES += ubnt-air-gateway
define Device/ubnt-air-gateway-pro
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Air Gateway Pro
BOARDNAME := UBNT-AGWP
UBNT_TYPE := AirGWP
UBNT_CHIP := ar934x
endef
#TARGET_DEVICES += ubnt-air-gateway-pro
define Device/ubdev01
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti ubDEV01
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
BOARDNAME := UBNT-UF
UBNT_BOARD := UBDEV01
endef
#TARGET_DEVICES += ubdev01
define Device/ubnt-routerstation
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 16128k
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
endef
define Device/ubnt-rs
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation
BOARDNAME := UBNT-RS
DEVICE_PROFILE += UBNTRS
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
endef
#TARGET_DEVICES += ubnt-rs
define Device/ubnt-rspro
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation Pro
BOARDNAME := UBNT-RSPRO
DEVICE_PROFILE += UBNTRSPRO
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
endef
#TARGET_DEVICES += ubnt-rspro
define Device/ubnt-ls-sr71
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti LS-SR71
BOARDNAME := UBNT-LS-SR71
UBNT_BOARD := LS-SR71
UBNT_TYPE := LS-SR71
UBNT_CHIP := ar7100
endef
#TARGET_DEVICES += ubnt-ls-sr71
define Device/ubnt-uap-pro
DEVICE_TITLE := Ubiquiti UAP Pro
KERNEL_SIZE := 1536k
IMAGE_SIZE := 15744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
UBNT_TYPE := BZ
UBNT_CHIP := ar934x
BOARDNAME := UAP-PRO
DEVICE_PROFILE := UBNT UAPPRO
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
endef
define Device/ubnt-unifi-outdoor-plus
$(Device/ubnt-uap-pro)
DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
UBNT_CHIP := ar7240
BOARDNAME := UBNT-UOP
DEVICE_PROFILE := UBNT
endef