openwrtv3/target/linux/brcm2708/patches-3.10/0056-spi-bcm2708-add-9-bit-support-using-LoSSI-mode.patch
Florian Fainelli 6918ea2484 brcm2708: update 3.10 patches with raspberrypi/rpi-3.10.y of 27 Apr. 2014
Update the 3.10 rasperry patches by rebasing raspberry/rpi-3.10-y
against linux-stable/v3.10.49.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42678
2014-09-27 19:10:51 +00:00

72 lines
2 KiB
Diff

From 4b64ce34aaf88c2869c74efad7cbe5167920625b Mon Sep 17 00:00:00 2001
From: notro <notro@tronnes.org>
Date: Sat, 26 Jan 2013 20:38:03 +0100
Subject: [PATCH 056/196] spi-bcm2708: add 9-bit support using LoSSI mode
---
drivers/spi/spi-bcm2708.c | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-bcm2708.c b/drivers/spi/spi-bcm2708.c
index b74aa32..abaa5a6 100644
--- a/drivers/spi/spi-bcm2708.c
+++ b/drivers/spi/spi-bcm2708.c
@@ -146,10 +146,31 @@ static inline void bcm2708_rd_fifo(struct bcm2708_spi *bs, int len)
static inline void bcm2708_wr_fifo(struct bcm2708_spi *bs, int len)
{
u8 byte;
+ u16 val;
if (len > bs->len)
len = bs->len;
+ if (unlikely(bcm2708_rd(bs, SPI_CS) & SPI_CS_LEN)) {
+ /* LoSSI mode */
+ if (unlikely(len % 2)) {
+ printk(KERN_ERR"bcm2708_wr_fifo: length must be even, skipping.\n");
+ bs->len = 0;
+ return;
+ }
+ while (len) {
+ if (bs->tx_buf) {
+ val = *(const u16 *)bs->tx_buf;
+ bs->tx_buf += 2;
+ } else
+ val = 0;
+ bcm2708_wr(bs, SPI_FIFO, val);
+ bs->len -= 2;
+ len -= 2;
+ }
+ return;
+ }
+
while (len--) {
byte = bs->tx_buf ? *bs->tx_buf++ : 0;
bcm2708_wr(bs, SPI_FIFO, byte);
@@ -234,8 +255,12 @@ static int bcm2708_setup_state(struct spi_master *master,
switch (bpw) {
case 8:
break;
+ case 9:
+ /* Reading in LoSSI mode is a special case. See 'BCM2835 ARM Peripherals' datasheet */
+ cs |= SPI_CS_LEN;
+ break;
default:
- dev_dbg(dev, "setup: invalid bits_per_word %u (must be 8)\n",
+ dev_dbg(dev, "setup: invalid bits_per_word %u (must be 8 or 9)\n",
bpw);
return -EINVAL;
}
@@ -283,7 +308,8 @@ static int bcm2708_process_transfer(struct bcm2708_spi *bs,
ret = bcm2708_setup_state(spi->master, &spi->dev, &state,
xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz,
spi->chip_select, spi->mode,
- spi->bits_per_word);
+ xfer->bits_per_word ? xfer->bits_per_word :
+ spi->bits_per_word);
if (ret)
return ret;
--
1.9.1