openwrtv3/target/linux/brcm63xx/dts/bcm63268.dtsi
Jonas Gorski a3384088a2 brcm63xx: add uart nodes
Now that we can register uarts through device-tree, add them to the dtsi
files.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-12-16 12:57:05 +01:00

250 lines
5 KiB
Text

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm63268";
aliases {
pinctrl = &pinctrl;
serial0 = &uart0;
serial1 = &uart1;
spi0 = &lsspi;
spi1 = &hsspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <1>;
};
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
memory { device_type = "memory"; reg = <0 0>; };
ubus@10000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
interrupt-parent = <&periph_intc>;
ext_intc: interrupt-controller@10000018 {
compatible = "brcm,bcm6345-ext-intc";
reg = <0x10000018 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <44>, <45>, <46>, <47>;
};
periph_intc: interrupt-controller@10000020 {
compatible = "brcm,bcm6345-l1-intc";
reg = <0x10000020 0x20>,
<0x10000040 0x20>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
pinctrl: pin-controller@100000c0 {
compatible = "brcm,bcm63268-pinctrl";
reg = <0x100000c0 0x8>,
<0x100000c8 0x8>,
<0x100000d0 0x4>,
<0x100000d8 0x4>,
<0x100000dc 0x4>,
<0x100000f8 0x4>;
reg-names = "dirout", "dat", "led", "mode",
"ctrl", "basemode";
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&periph_intc>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35";
pinctrl_serial_led: serial_led {
pinctrl_serial_led_clk: serial_led_clk {
function = "serial_led_clk";
pins = "gpio0";
};
pinctrl_serial_led_data: serial_led_data {
function = "serial_led_data";
pins = "gpio1";
};
};
pinctrl_hsspi_cs4: hsspi_cs4 {
function = "hsspi_cs4";
pins = "gpio16";
};
pinctrl_hsspi_cs5: hsspi_cs5 {
function = "hsspi_cs5";
pins = "gpio17";
};
pinctrl_hsspi_cs6: hsspi_cs6 {
function = "hsspi_cs6";
pins = "gpio8";
};
pinctrl_hsspi_cs7: hsspi_cs7 {
function = "hsspi_cs7";
pins = "gpio9";
};
pinctrl_adsl_spi: adsl_spi {
pinctrl_adsl_spi_miso: adsl_spi_miso {
function = "adsl_spi_miso";
pins = "gpio18";
};
pinctrl_adsl_spi_mosi: adsl_spi_mosi {
function = "adsl_spi_mosi";
pins = "gpio19";
};
};
pinctrl_vreq_clk: vreq_clk {
function = "vreq_clk";
pins = "gpio22";
};
pinctrl_pcie_clkreq_b: pcie_clkreq_b {
function = "pcie_clkreq_b";
pins = "gpio23";
};
pinctrl_robosw_led_clk: robosw_led_clk {
function = "robosw_led_clk";
pins = "gpio30";
};
pinctrl_robosw_led_data: robosw_led_data {
function = "robosw_led_data";
pins = "gpio31";
};
pinctrl_nand: nand {
function = "nand";
group = "nand_grp";
};
pinctrl_gpio35_alt: gpio35_alt {
function = "gpio35_alt";
pin = "gpio35";
};
pinctrl_dectpd: dectpd {
function = "dectpd";
group = "dectpd_grp";
};
pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
function = "vdsl_phy_override_0";
group = "vdsl_phy_override_0_grp";
};
pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
function = "vdsl_phy_override_1";
group = "vdsl_phy_override_1_grp";
};
pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
function = "vdsl_phy_override_2";
group = "vdsl_phy_override_2_grp";
};
pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
function = "vdsl_phy_override_3";
group = "vdsl_phy_override_3_grp";
};
pinctrl_dsl_gpio8: dsl_gpio8 {
function = "dsl_gpio8";
group = "dsl_gpio8";
};
pinctrl_dsl_gpio9: dsl_gpio9 {
function = "dsl_gpio9";
group = "dsl_gpio9";
};
};
uart0: serial@10000180 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000180 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <5>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
uart1: serial@100001a0 {
compatible = "brcm,bcm6345-uart";
reg = <0x100001a0 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <34>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
lsspi: spi@10000800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6358-spi";
reg = <0x10000800 0x70c>;
interrupts = <80>;
/* clocks = <&clkctl 15>; */
};
hsspi: spi@10001000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6328-hsspi";
reg = <0x10001000 0x600>;
interrupts = <6>;
/* clocks = <&clkctl 16>; */
};
leds: led-controller@10001900 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6328-leds";
reg = <0x10001900 0x24>;
status = "disabled";
};
};
};