openwrtv3/target/linux/brcm63xx/dts/fast2704n.dts
Jonas Gorski 0f063f8ac7 brcm63xx: drop root parameter from cmdline
The root= parameter overrides the automatic rootfs detection by partition
name, so drop it. Fixes boot from flash after renumeration changes of
partitions due to parser changes.

Fixes FS#1350.

Fixes: a27d59bb42 ("brcm63xx: switch to new partition layout specification")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-13 13:17:26 +01:00

133 lines
2.3 KiB
Text

/dts-v1/;
#include "bcm6318.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Sagem F@ST2704N";
compatible = "sagem,f@st2704n", "brcm,bcm6318";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
wlan {
label = "wlan";
gpios = <&pinctrl 1 0>;
linux,code = <KEY_WLAN>;
};
wps {
label = "wps";
gpios = <&pinctrl 33 1>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
wps_green {
label = "F@ST2704N:green:wps";
gpios = <&pinctrl 2 1>;
};
lan1_green {
label = "F@ST2704N:green:lan1";
gpios = <&pinctrl 4 1>;
};
lan2_green {
label = "F@ST2704N:green:lan2";
gpios = <&pinctrl 5 1>;
};
lan3_green {
label = "F@ST2704N:green:lan3";
gpios = <&pinctrl 6 1>;
};
lan4_green {
label = "F@ST2704N:green:lan4";
gpios = <&pinctrl 7 1>;
};
inet_green {
label = "F@ST2704N:green:inet";
gpios = <&pinctrl 8 1>;
};
inet_red {
label = "F@ST2704N:red:inet";
gpios = <&pinctrl 9 1>;
};
dsl_green {
label = "F@ST2704N:green:dsl";
gpios = <&pinctrl 10 1>;
};
power_red {
label = "F@ST2704N:red:power";
gpios = <&pinctrl 11 1>;
};
power_green {
label = "F@ST2704N:green:power";
gpios = <&pinctrl 47 1>;
default-state = "on";
};
usb_green {
label = "F@ST2704N:green:usb";
gpios = <&pinctrl 49 1>;
};
};
};
&hsspi {
status = "ok";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <62500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
linux,part-probe = "bcm63xxpart";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0x7e0000>;
label = "linux";
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
reg = <0x7f0000 0x010000>;
label = "nvram";
};
};
};
};
&uart0 {
status = "ok";
};