b529387d8c
The VGV7510KW22 has the leds for LAN1-3 connected to pin1 of the phys
and the led for LAN4 connect to pin0 of the phy. This results with the
current configuration in a fast flashing LAN4 led as soon as a network
cable is connected. Something similar was reported on the forum[1] for
the VGV7519 as well.
Since it isn't predicable to which pin a (single) phy led is connected,
use the (default) pin1 functionality
Constant On: 10/100/1000MBit
Blink Fast: None
Blink Slow: None
Pulse: TX/RX
for all ethernet phy leds.
After checking pictures of all vr9 boards, it looks like only the VG3503J
has more than one led connected per phy. Using the phy led device tree
bindings to assign the functionality to the "additional" leds, the
VG3503J phy leds should behave as before.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
[1] https://forum.openwrt.org/viewtopic.php?pid=321523
SVN-Revision: 49270
537 lines
17 KiB
Diff
537 lines
17 KiB
Diff
From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
|
|
From: John Crispin <blogic@openwrt.org>
|
|
Date: Thu, 7 Aug 2014 18:15:36 +0200
|
|
Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
|
|
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
|
|
---
|
|
drivers/net/phy/Kconfig | 5 +
|
|
drivers/net/phy/Makefile | 1 +
|
|
drivers/net/phy/lantiq.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 237 insertions(+)
|
|
create mode 100644 drivers/net/phy/lantiq.c
|
|
|
|
--- a/drivers/net/phy/Kconfig
|
|
+++ b/drivers/net/phy/Kconfig
|
|
@@ -202,6 +202,11 @@ config RTL8306_PHY
|
|
tristate "Driver for Realtek RTL8306S switches"
|
|
select SWCONFIG
|
|
|
|
+config LANTIQ_PHY
|
|
+ tristate "Driver for Lantiq PHYs"
|
|
+ ---help---
|
|
+ Supports the 11G and 22F PHYs.
|
|
+
|
|
config FIXED_PHY
|
|
tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
|
|
depends on PHYLIB
|
|
--- a/drivers/net/phy/Makefile
|
|
+++ b/drivers/net/phy/Makefile
|
|
@@ -46,6 +46,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o
|
|
obj-$(CONFIG_DP83867_PHY) += dp83867.o
|
|
obj-$(CONFIG_STE10XP) += ste10Xp.o
|
|
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
|
+obj-$(CONFIG_LANTIQ_PHY) += lantiq.o
|
|
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
|
|
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
|
|
obj-$(CONFIG_AT803X_PHY) += at803x.o
|
|
--- /dev/null
|
|
+++ b/drivers/net/phy/lantiq.c
|
|
@@ -0,0 +1,278 @@
|
|
+/*
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
|
+ *
|
|
+ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/phy.h>
|
|
+#include <linux/of.h>
|
|
+
|
|
+#define MII_MMDCTRL 0x0d
|
|
+#define MII_MMDDATA 0x0e
|
|
+
|
|
+#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */
|
|
+#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */
|
|
+
|
|
+#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */
|
|
+#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */
|
|
+#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */
|
|
+#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */
|
|
+#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */
|
|
+#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */
|
|
+#define INT_VR9_11G_LSTC BIT(0) /* Link state change */
|
|
+#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
|
|
+
|
|
+#define ADVERTISED_MPD BIT(10) /* Multi-port device */
|
|
+
|
|
+#define MMD_DEVAD 0x1f
|
|
+#define MMD_ACTYPE_SHIFT 14
|
|
+#define MMD_ACTYPE_ADDRESS (0 << MMD_ACTYPE_SHIFT)
|
|
+#define MMD_ACTYPE_DATA (1 << MMD_ACTYPE_SHIFT)
|
|
+#define MMD_ACTYPE_DATA_PI (2 << MMD_ACTYPE_SHIFT)
|
|
+#define MMD_ACTYPE_DATA_PIWR (3 << MMD_ACTYPE_SHIFT)
|
|
+
|
|
+static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev,
|
|
+ u16 regnum)
|
|
+{
|
|
+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
|
|
+ phy_write(phydev, MII_MMDDATA, regnum);
|
|
+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
|
|
+
|
|
+ return phy_read(phydev, MII_MMDDATA);
|
|
+}
|
|
+
|
|
+static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev,
|
|
+ u16 regnum, u16 val)
|
|
+{
|
|
+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
|
|
+ phy_write(phydev, MII_MMDDATA, regnum);
|
|
+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
|
|
+ phy_write(phydev, MII_MMDDATA, val);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#if IS_ENABLED(CONFIG_OF_MDIO)
|
|
+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
|
|
+{
|
|
+ u32 tmp;
|
|
+
|
|
+ /* store the led values if one was passed by the devicetree */
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledch", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e0, tmp);
|
|
+
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledcl", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e1, tmp);
|
|
+
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0h", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e2, tmp);
|
|
+
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0l", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e3, tmp);
|
|
+
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1h", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e4, tmp);
|
|
+
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1l", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e5, tmp);
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2h", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e6, tmp);
|
|
+
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2l", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e7, tmp);
|
|
+
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3h", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e8, tmp);
|
|
+
|
|
+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3l", &tmp))
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e9, tmp);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+#else
|
|
+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+#endif /* CONFIG_OF_MDIO */
|
|
+
|
|
+static int vr9_gphy_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ int err;
|
|
+
|
|
+ dev_dbg(&phydev->dev, "%s\n", __func__);
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ /* Clear all pending interrupts */
|
|
+ phy_read(phydev, MII_VR9_11G_ISTAT);
|
|
+
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e2, 0x70);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e3, 0x03);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e6, 0x70);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e7, 0x03);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e8, 0x70);
|
|
+ vr9_gphy_mmd_write(phydev, 0x1e9, 0x03);
|
|
+
|
|
+ vr9_gphy_of_reg_init(phydev);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int vr9_gphy_config_aneg(struct phy_device *phydev)
|
|
+{
|
|
+ int reg, err;
|
|
+
|
|
+ /* Advertise as multi-port device */
|
|
+ reg = phy_read(phydev, MII_CTRL1000);
|
|
+ reg |= ADVERTISED_MPD;
|
|
+ err = phy_write(phydev, MII_CTRL1000, reg);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ return genphy_config_aneg(phydev);
|
|
+}
|
|
+
|
|
+static int vr9_gphy_ack_interrupt(struct phy_device *phydev)
|
|
+{
|
|
+ int reg;
|
|
+
|
|
+ /*
|
|
+ * Possible IRQ numbers:
|
|
+ * - IM3_IRL18 for GPHY0
|
|
+ * - IM3_IRL17 for GPHY1
|
|
+ *
|
|
+ * Due to a silicon bug IRQ lines are not really independent from
|
|
+ * each other. Sometimes the two lines are driven at the same time
|
|
+ * if only one GPHY core raises the interrupt.
|
|
+ */
|
|
+
|
|
+ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
|
|
+
|
|
+ return (reg < 0) ? reg : 0;
|
|
+}
|
|
+
|
|
+static int vr9_gphy_did_interrupt(struct phy_device *phydev)
|
|
+{
|
|
+ int reg;
|
|
+
|
|
+ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
|
|
+
|
|
+ return reg > 0;
|
|
+}
|
|
+
|
|
+static int vr9_gphy_config_intr(struct phy_device *phydev)
|
|
+{
|
|
+ int err;
|
|
+
|
|
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
+ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
|
|
+ else
|
|
+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
|
|
+
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static struct phy_driver lantiq_phy[] = {
|
|
+ {
|
|
+ .phy_id = 0xd565a400,
|
|
+ .phy_id_mask = 0xfffffff8,
|
|
+ .name = "Lantiq XWAY PEF7071",
|
|
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
|
|
+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
|
|
+ .config_init = vr9_gphy_config_init,
|
|
+ .config_aneg = vr9_gphy_config_aneg,
|
|
+ .read_status = genphy_read_status,
|
|
+ .ack_interrupt = vr9_gphy_ack_interrupt,
|
|
+ .did_interrupt = vr9_gphy_did_interrupt,
|
|
+ .config_intr = vr9_gphy_config_intr,
|
|
+ .driver = { .owner = THIS_MODULE },
|
|
+ }, {
|
|
+ .phy_id = 0x030260D0,
|
|
+ .phy_id_mask = 0xfffffff0,
|
|
+ .name = "Lantiq XWAY VR9 GPHY 11G v1.3",
|
|
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
|
|
+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
|
|
+ .config_init = vr9_gphy_config_init,
|
|
+ .config_aneg = vr9_gphy_config_aneg,
|
|
+ .read_status = genphy_read_status,
|
|
+ .ack_interrupt = vr9_gphy_ack_interrupt,
|
|
+ .did_interrupt = vr9_gphy_did_interrupt,
|
|
+ .config_intr = vr9_gphy_config_intr,
|
|
+ .driver = { .owner = THIS_MODULE },
|
|
+ }, {
|
|
+ .phy_id = 0xd565a408,
|
|
+ .phy_id_mask = 0xfffffff8,
|
|
+ .name = "Lantiq XWAY VR9 GPHY 11G v1.4",
|
|
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
|
|
+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
|
|
+ .config_init = vr9_gphy_config_init,
|
|
+ .config_aneg = vr9_gphy_config_aneg,
|
|
+ .read_status = genphy_read_status,
|
|
+ .ack_interrupt = vr9_gphy_ack_interrupt,
|
|
+ .did_interrupt = vr9_gphy_did_interrupt,
|
|
+ .config_intr = vr9_gphy_config_intr,
|
|
+ .driver = { .owner = THIS_MODULE },
|
|
+ }, {
|
|
+ .phy_id = 0xd565a418,
|
|
+ .phy_id_mask = 0xfffffff8,
|
|
+ .name = "Lantiq XWAY XRX PHY22F v1.4",
|
|
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
|
|
+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
|
|
+ .config_init = vr9_gphy_config_init,
|
|
+ .config_aneg = vr9_gphy_config_aneg,
|
|
+ .read_status = genphy_read_status,
|
|
+ .ack_interrupt = vr9_gphy_ack_interrupt,
|
|
+ .did_interrupt = vr9_gphy_did_interrupt,
|
|
+ .config_intr = vr9_gphy_config_intr,
|
|
+ .driver = { .owner = THIS_MODULE },
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init ltq_phy_init(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) {
|
|
+ int err = phy_driver_register(&lantiq_phy[i]);
|
|
+ if (err)
|
|
+ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void __exit ltq_phy_exit(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++)
|
|
+ phy_driver_unregister(&lantiq_phy[i]);
|
|
+}
|
|
+
|
|
+module_init(ltq_phy_init);
|
|
+module_exit(ltq_phy_exit);
|
|
+
|
|
+MODULE_DESCRIPTION("Lantiq PHY drivers");
|
|
+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
|
|
+MODULE_LICENSE("GPL");
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
|
|
@@ -0,0 +1,216 @@
|
|
+Lanitq PHY binding
|
|
+============================================
|
|
+
|
|
+This devicetree binding controls the lantiq ethernet phys led functionality.
|
|
+
|
|
+Example:
|
|
+ mdio@0 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ compatible = "lantiq,xrx200-mdio";
|
|
+ phy5: ethernet-phy@5 {
|
|
+ reg = <0x1>;
|
|
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
+ };
|
|
+ phy11: ethernet-phy@11 {
|
|
+ reg = <0x11>;
|
|
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
|
|
+ lantiq,led2h = <0x00>;
|
|
+ lantiq,led2l = <0x03>;
|
|
+ };
|
|
+ phy12: ethernet-phy@12 {
|
|
+ reg = <0x12>;
|
|
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
|
|
+ lantiq,led1h = <0x00>;
|
|
+ lantiq,led1l = <0x03>;
|
|
+ };
|
|
+ phy13: ethernet-phy@13 {
|
|
+ reg = <0x13>;
|
|
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
|
|
+ lantiq,led2h = <0x00>;
|
|
+ lantiq,led2l = <0x03>;
|
|
+ };
|
|
+ phy14: ethernet-phy@14 {
|
|
+ reg = <0x14>;
|
|
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
|
|
+ lantiq,led1h = <0x00>;
|
|
+ lantiq,led1l = <0x03>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+Register Description
|
|
+============================================
|
|
+
|
|
+LEDCH:
|
|
+
|
|
+Name Hardware Reset Value
|
|
+LEDCH 0x00C5
|
|
+
|
|
+| 15 | | | | | | | 8 |
|
|
+=========================================
|
|
+| RES |
|
|
+=========================================
|
|
+
|
|
+| 7 | | | | | | | 0 |
|
|
+=========================================
|
|
+| FBF | SBF |RES | NACS |
|
|
+=========================================
|
|
+
|
|
+Field Bits Type Description
|
|
+FBF 7:6 RW Fast Blink Frequency
|
|
+ ---
|
|
+ 0x0 (00b) F02HZ 2 Hz blinking frequency
|
|
+ 0x1 (01b) F04HZ 4 Hz blinking frequency
|
|
+ 0x2 (10b) F08HZ 8 Hz blinking frequency
|
|
+ 0x3 (11b) F16HZ 16 Hz blinking frequency
|
|
+
|
|
+SBF 5:4 RW Slow Blink Frequency
|
|
+ ---
|
|
+ 0x0 (00b) F02HZ 2 Hz blinking frequency
|
|
+ 0x1 (01b) F04HZ 4 Hz blinking frequency
|
|
+ 0x2 (10b) F08HZ 8 Hz blinking frequency
|
|
+ 0x3 (11b) F16HZ 16 Hz blinking frequency
|
|
+
|
|
+NACS 2:0 RW Inverse of Scan Function
|
|
+ ---
|
|
+ 0x0 (000b) NONE No Function
|
|
+ 0x1 (001b) LINK Complex function enabled when link is up
|
|
+ 0x2 (010b) PDOWN Complex function enabled when device is powered-down
|
|
+ 0x3 (011b) EEE Complex function enabled when device is in EEE mode
|
|
+ 0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
|
|
+ 0x5 (101b) ABIST Complex function enabled when analog self-test is running
|
|
+ 0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
|
|
+ 0x7 (111b) TEST Complex function enabled when test mode is running
|
|
+
|
|
+LEDCL:
|
|
+
|
|
+Name Hardware Reset Value
|
|
+LEDCL 0x0067
|
|
+
|
|
+| 15 | | | | | | | 8 |
|
|
+=========================================
|
|
+| RES |
|
|
+=========================================
|
|
+
|
|
+| 7 | | | | | | | 0 |
|
|
+=========================================
|
|
+|RES | SCAN |RES | CBLINK |
|
|
+=========================================
|
|
+
|
|
+Field Bits Type Description
|
|
+SCAN 6:4 RW Complex Scan Configuration
|
|
+ ---
|
|
+ 000 B NONE No Function
|
|
+ 001 B LINK Complex function enabled when link is up
|
|
+ 010 B PDOWN Complex function enabled when device is powered-down
|
|
+ 011 B EEE Complex function enabled when device is in EEE mode
|
|
+ 100 B ANEG Complex function enabled when auto-negotiation is running
|
|
+ 101 B ABIST Complex function enabled when analog self-test is running
|
|
+ 110 B CDIAG Complex function enabled when cable diagnostics are running
|
|
+ 111 B TEST Complex function enabled when test mode is running
|
|
+
|
|
+CBLINK 2:0 RW Complex Blinking Configuration
|
|
+ ---
|
|
+ 000 B NONE No Function
|
|
+ 001 B LINK Complex function enabled when link is up
|
|
+ 010 B PDOWN Complex function enabled when device is powered-down
|
|
+ 011 B EEE Complex function enabled when device is in EEE mode
|
|
+ 100 B ANEG Complex function enabled when auto-negotiation is running
|
|
+ 101 B ABIST Complex function enabled when analog self-test is running
|
|
+ 110 B CDIAG Complex function enabled when cable diagnostics are running
|
|
+ 111 B TEST Complex function enabled when test mode is running
|
|
+
|
|
+LEDxH:
|
|
+
|
|
+Name Hardware Reset Value
|
|
+LED0H 0x0070
|
|
+LED1H 0x0020
|
|
+LED2H 0x0040
|
|
+LED3H 0x0040
|
|
+
|
|
+| 15 | | | | | | | 8 |
|
|
+=========================================
|
|
+| RES |
|
|
+=========================================
|
|
+
|
|
+| 7 | | | | | | | 0 |
|
|
+=========================================
|
|
+| CON | BLINKF |
|
|
+=========================================
|
|
+
|
|
+Field Bits Type Description
|
|
+CON 7:4 RW Constant On Configuration
|
|
+ ---
|
|
+ 0x0 (0000b) NONE LED does not light up constantly
|
|
+ 0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
|
|
+ 0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
|
|
+ 0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
|
|
+ 0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
|
|
+ 0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
|
|
+ 0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
|
|
+ 0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
|
|
+ 0x8 (1000b) PDOWN LED is on when device is powered-down
|
|
+ 0x9 (1001b) EEE LED is on when device is in EEE mode
|
|
+ 0xA (1010b) ANEG LED is on when auto-negotiation is running
|
|
+ 0xB (1011b) ABIST LED is on when analog self-test is running
|
|
+ 0xC (1100b) CDIAG LED is on when cable diagnostics are running
|
|
+
|
|
+BLINKF 3:0 RW Fast Blinking Configuration
|
|
+ ---
|
|
+ 0x0 (0000b) NONE No Blinking
|
|
+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
|
|
+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
|
|
+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
|
|
+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
|
|
+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
|
|
+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
|
|
+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
|
|
+ 0x8 (1000b) PDOWN Blink when device is powered-down
|
|
+ 0x9 (1001b) EEE Blink when device is in EEE mode
|
|
+ 0xA (1010b) ANEG Blink when auto-negotiation is running
|
|
+ 0xB (1011b) ABIST Blink when analog self-test is running
|
|
+ 0xC (1100b) CDIAG Blink when cable diagnostics are running
|
|
+
|
|
+LEDxL:
|
|
+
|
|
+Name Hardware Reset Value
|
|
+LED0L 0x0003
|
|
+LED1L 0x0000
|
|
+LED2L 0x0000
|
|
+LED3L 0x0020
|
|
+
|
|
+| 15 | | | | | | | 8 |
|
|
+=========================================
|
|
+| RES |
|
|
+=========================================
|
|
+
|
|
+| 7 | | | | | | | 0 |
|
|
+=========================================
|
|
+| BLINKS | PULSE |
|
|
+=========================================
|
|
+
|
|
+Field Bits Type Description
|
|
+BLINKS 7:4 RW Slow Blinkin Configuration
|
|
+ ---
|
|
+ 0x0 (0000b) NONE No Blinking
|
|
+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
|
|
+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
|
|
+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
|
|
+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
|
|
+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
|
|
+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
|
|
+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
|
|
+ 0x8 (1000b) PDOWN Blink when device is powered-down
|
|
+ 0x9 (1001b) EEE Blink when device is in EEE mode
|
|
+ 0xA (1010b) ANEG Blink when auto-negotiation is running
|
|
+ 0xB (1011b) ABIST Blink when analog self-test is running
|
|
+ 0xC (1100b) CDIAG Blink when cable diagnostics are runningning
|
|
+
|
|
+PULSE 3:0 RW Pulsing Configuration
|
|
+ The pulse field is a mask field by which certain events can be combined
|
|
+ ---
|
|
+ 0x0 (0000b) NONE No pulsing
|
|
+ 0x1 (0001b) TXACT Transmit activity
|
|
+ 0x2 (0010b) RXACT Receive activity
|
|
+ 0x4 (0100b) COL Collision
|
|
+ 0x8 (1000b) RES Reserved
|