openwrtv3/target/linux/ar71xx
Piotr Dymacz 0c6165d21a ar71xx: add support for ALFA Network AP121F
ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users.
Device is based on Atheros AR9331 WiSoC and is running a custom version
(updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware.

Specification:

- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR1)
- 16 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 1T1R 2.4 GHz
- 1x microSD (optional, on separate PCB)
- 3x LED, 1x button, 1x switch
- UART header on PCB

Flash instruction (under U-Boot web recovery mode):

1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with RJ45 port, press the reset button, power up device,
   wait for first blink of all LEDs (indicates network setup), then keep
   button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-07-22 23:13:55 +02:00
..
base-files ar71xx: add support for ALFA Network AP121F 2017-07-22 23:13:55 +02:00
files ar71xx: add support for ALFA Network AP121F 2017-07-22 23:13:55 +02:00
generic switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
image ar71xx: add support for ALFA Network AP121F 2017-07-22 23:13:55 +02:00
mikrotik ar71xx: add support for ALFA Network AP121F 2017-07-22 23:13:55 +02:00
nand ar71xx: add support for ALFA Network AP121F 2017-07-22 23:13:55 +02:00
patches-4.4 kernel: update kernel 4.4 to 4.4.74 2017-06-27 07:42:50 +02:00
config-4.4 ar71xx: add support for ALFA Network AP121F 2017-07-22 23:13:55 +02:00
Makefile build: remove mips16 feature flag from target makefiles 2017-01-24 13:15:01 +01:00
modules.mk ar71xx: add LED driver NU801 2015-12-11 15:04:57 +00:00