openwrtv3/target/linux/ramips/dts/WLI-TX4-AG300N.dts
John Crispin f44d3f9980 ramips: soc wmac eeprom cleanup
Move eeprom extraction from scripts to dts files.
Additionally there are few other changes like:
- whitespace fixes
- add partition labels where needed
- BR6524N board doesn't exist (lost in translation?)
- fix Edimax 3g-6200nl model
- add wmac eeprom to dts for Asus RT-N14U board

Compile tested all subtargets and their profiles.
Run tested on:
- Asus RT-N15
- Asus RT-N14U
- Buffalo WHR-600D
- Argus ATP52B
- Sparklan WCR-150GN

Few problems noted:
- many boards didn't have wmac eeprom information defined at all
- several boards don't have any patitions defined (see FIXME comments in dts)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41680
2014-07-17 10:55:31 +00:00

104 lines
1.7 KiB
Text

/dts-v1/;
/include/ "rt2880.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
model = "Buffalo WLI-TX4-AG300N";
palmbus@300000 {
sysc@0 {
ralink,pinmux = "uartlite";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x3b0000>;
};
};
ethernet@400000 {
status = "okay";
mtd-mac-address = <&factory 0x4>;
port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
};
wmac@480000 {
ralink,mtd-eeprom = <&factory 0>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
bandwidth {
label = "bandwidth";
gpios = <&gpio0 8 0>;
linux,code = <0x198>;
};
reset {
label = "reset";
gpios = <&gpio0 9 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
diag {
label = "buffalo:red:diag";
gpios = <&gpio0 10 1>;
};
power {
label = "buffalo:blue:power";
gpios = <&gpio0 12 1>;
};
security {
label = "buffalo:blue:security";
gpios = <&gpio0 13 1>;
};
};
};