openwrtv3/target/linux/ramips/dts/CS-QR10.dts
Mathias Kresin 2281f9929b ramips: remove Planex CS-QR10 sound device tree node
The comptible string is neither added by any LEDE patch nor exists in
in the kernel. Drop the sound node which was obviously added
accidentally with 9195d8da ("ramips: DTS rework").

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 00:45:55 +01:00

151 lines
1.9 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex CS-QR10";
gpio-leds {
compatible = "gpio-leds";
power {
label = "cs-qr10:red:power";
gpios = <&gpio1 4 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
s1 {
label = "reset";
gpios = <&gpio1 1 1>;
linux,code = <KEY_RESTART>;
};
s2 {
label = "wps";
gpios = <&gpio1 3 1>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&i2c {
status = "okay";
};
&i2s {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pcm_i2s_pins>;
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pcm {
status = "okay";
};
&gdma {
status = "okay";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi refclk", "rgmii1";
ralink,function = "gpio";
};
wdt {
ralink,group = "wdt";
ralink,function = "wdt refclk";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
&gsw {
ralink,port4 = "ephy";
};
&sdhci {
status = "okay";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pcie {
status = "okay";
};