openwrtv3/target/linux/brcm63xx/dts/nb4-fxc-r1.dts
Jonas Gorski 0755c2d117 brcm63xx: add pinctrl support
Add and enable pincontrol drivers, and update dts(i) files with
appropriate hogs.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:37 +02:00

110 lines
2 KiB
Text

/dts-v1/;
#include "bcm6358.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "SFR Neuf Box 4 (Foxconn)";
compatible = "sfr,nb4-fxc-r1", "brcm,bcm6358";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
};
spi-gpio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "spi-gpio";
gpio-mosi = <&pinctrl 7 0>;
gpio-sck = <&pinctrl 6 0>;
num-chipselects = <0>;
hc595: gpio-spi-controller@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
gpio-controller;
#gpio-cells = <2>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
service {
label = "service";
gpios = <&pinctrl 27 1>;
linux,code = <BTN_0>;
};
clip {
label = "clip";
gpios = <&pinctrl 31 1>;
linux,code = <BTN_1>;
};
reset {
label = "reset";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&pinctrl 37 1>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
traffic_white {
label = "NB4-FXC-r1:white:traffic";
gpios = <&pinctrl 2 0>;
};
service_blue {
label = "NB4-FXC-r1:blue:service";
gpios = <&pinctrl 4 0>;
};
wifi_white {
label = "NB4-FXC-r1:white:wifi";
gpios = <&pinctrl 15 0>;
};
service_red {
label = "NB4-FXC-r1:red:service";
gpios = <&pinctrl 29 0>;
};
service_green {
label = "NB4-FXC-r1:green:service";
gpios = <&pinctrl 30 0>;
};
alarm_white {
label = "NB4-FXC-r1:white:alarm";
gpios = <&hc595 0 1>;
};
tv_white {
label = "NB4-FXC-r1:white:tv";
gpios = <&hc595 2 1>;
};
tel_white {
label = "NB4-FXC-r1:white:tel";
gpios = <&hc595 3 1>;
};
adsl_white {
label = "NB4-FXC-r0:white:adsl";
gpios = <&hc595 4 1>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
};