openwrtv3/target/linux/mvebu/patches-3.10/0123-mtd-nand-pxa3xx-Make-dma-code-dependent-on-dma-capab.patch
Luka Perkov 3af779eb17 mvebu: backport mainline patches from kernel 3.12
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12.
This work mainly covers:

* Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family,and the Armada family.
* Further updates to the mvebu MBus.
* Work and ground work for enabling MSI on the Armada family.
* some phy / mdio bus initialization related work.
* Device tree binding documentation update.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39565
2014-02-11 02:07:41 +00:00

106 lines
3.1 KiB
Diff

From 085ced2b9e159dbeae029e338958b8c8ae9073b9 Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Mon, 12 Aug 2013 14:14:56 -0300
Subject: [PATCH 123/203] mtd: nand: pxa3xx: Make dma code dependent on dma
capable platforms
This patch adds a macro ARCH_HAS_DMA to compile-out arch specific
dma code, namely pxa_request_dma() and pxa_free_dma(). These symbols
are available only in pxa, which makes impossible to build the driver in
other platforms than ARCH_PXA.
In order to handle non-dma capable platforms, we implement a fallbacks that
allocate buffers as if 'use_dma=false', putting the dma related code
under the ARCH_HAS_DMA conditional.
Please note that the correct way to handle this is to migrate the
dma code to use of the mmp_pdma dmaengine driver. However, currently
this is not possible because the two dmaengine drivers can't work together.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -25,7 +25,14 @@
#include <linux/of.h>
#include <linux/of_device.h>
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
+#define ARCH_HAS_DMA
+#endif
+
+#ifdef ARCH_HAS_DMA
#include <mach/dma.h>
+#endif
+
#include <linux/platform_data/mtd-nand-pxa3xx.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
@@ -381,6 +388,7 @@ static void handle_data_pio(struct pxa3x
}
}
+#ifdef ARCH_HAS_DMA
static void start_data_dma(struct pxa3xx_nand_info *info)
{
struct pxa_dma_desc *desc = info->data_desc;
@@ -427,6 +435,10 @@ static void pxa3xx_nand_data_dma_irq(int
enable_int(info, NDCR_INT_MASK);
nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
}
+#else
+static void start_data_dma(struct pxa3xx_nand_info *info)
+{}
+#endif
static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
{
@@ -905,6 +917,7 @@ static int pxa3xx_nand_detect_config(str
*/
#define MAX_BUFF_SIZE PAGE_SIZE
+#ifdef ARCH_HAS_DMA
static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
{
struct platform_device *pdev = info->pdev;
@@ -950,6 +963,20 @@ static void pxa3xx_nand_free_buff(struct
kfree(info->data_buff);
}
}
+#else
+static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
+{
+ info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
+ if (info->data_buff == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
+{
+ kfree(info->data_buff);
+}
+#endif
static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
{
@@ -1265,6 +1292,13 @@ static int pxa3xx_nand_probe(struct plat
struct pxa3xx_nand_info *info;
int ret, cs, probe_success;
+#ifndef ARCH_HAS_DMA
+ if (use_dma) {
+ use_dma = 0;
+ dev_warn(&pdev->dev,
+ "This platform can't do DMA on this device\n");
+ }
+#endif
ret = pxa3xx_nand_probe_dt(pdev);
if (ret)
return ret;