openwrtv3/target/linux/generic/pending-4.14/834-ledtrig-libata.patch
Stijn Tintel 22b9f99b87 kernel: bump 4.14 to 4.14.59
Drop patch that was superseded upstream:
ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch

Drop upstreamed patches:
- apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch
- apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch
- ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
- brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
- brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
- generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch
- generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch
- generic/pending/900-gen_stats-fix-netlink-stats-padding.patch

In 4.14.55, a patch was introduced that breaks ext4 images in some
cases. The newly introduced patch
backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch
addresses this breakage.

Fixes the following CVEs:
- CVE-2018-10876
- CVE-2018-10877
- CVE-2018-10879
- CVE-2018-10880
- CVE-2018-10881
- CVE-2018-10882
- CVE-2018-10883

Compile-tested: ath79, octeon, x86/64
Runtime-tested: ath79, octeon, x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-07-31 05:11:07 +03:00

149 lines
3.9 KiB
Diff

From: Daniel Golle <daniel@makrotopia.org>
Subject: libata: add ledtrig support
This adds a LED trigger for each ATA port indicating disk activity.
As this is needed only on specific platforms (NAS SoCs and such),
these platforms should define ARCH_WANTS_LIBATA_LEDS if there
are boards with LED(s) intended to indicate ATA disk activity and
need the OS to take care of that.
In that way, if not selected, LED trigger support not will be
included in libata-core and both, codepaths and structures remain
untouched.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/ata/Kconfig | 16 ++++++++++++++++
drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
include/linux/libata.h | 9 +++++++++
3 files changed, 66 insertions(+)
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR
If unsure, say Y.
+config ARCH_WANT_LIBATA_LEDS
+ bool
+
+config ATA_LEDS
+ bool "support ATA port LED triggers"
+ depends on ARCH_WANT_LIBATA_LEDS
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGERS
+ default y
+ help
+ This option adds a LED trigger for each registered ATA port.
+ It is used to drive disk activity leds connected via GPIO.
+
+ If unsure, say N.
+
config ATA_ACPI
bool "ATA ACPI Support"
depends on ACPI
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -731,6 +731,19 @@ u64 ata_tf_read_block(const struct ata_t
return block;
}
+#ifdef CONFIG_ATA_LEDS
+#define LIBATA_BLINK_DELAY 20 /* ms */
+static inline void ata_led_act(struct ata_port *ap)
+{
+ unsigned long led_delay = LIBATA_BLINK_DELAY;
+
+ if (unlikely(!ap->ledtrig))
+ return;
+
+ led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
+}
+#endif
+
/**
* ata_build_rw_tf - Build ATA taskfile for given read/write request
* @tf: Target ATA taskfile
@@ -5120,6 +5133,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (tag < 0)
return NULL;
}
+#ifdef CONFIG_ATA_LEDS
+ ata_led_act(ap);
+#endif
qc = __ata_qc_from_tag(ap, tag);
qc->tag = tag;
@@ -6021,6 +6037,9 @@ struct ata_port *ata_port_alloc(struct a
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
+#ifdef CONFIG_ATA_LEDS
+ ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
+#endif
ata_sff_port_init(ap);
return ap;
@@ -6042,6 +6061,12 @@ static void ata_host_release(struct devi
kfree(ap->pmp_link);
kfree(ap->slave_link);
+#ifdef CONFIG_ATA_LEDS
+ if (ap->ledtrig) {
+ led_trigger_unregister(ap->ledtrig);
+ kfree(ap->ledtrig);
+ };
+#endif
kfree(ap);
host->ports[i] = NULL;
}
@@ -6488,7 +6513,23 @@ int ata_host_register(struct ata_host *h
host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
host->ports[i]->local_port_no = i + 1;
}
+#ifdef CONFIG_ATA_LEDS
+ for (i = 0; i < host->n_ports; i++) {
+ if (unlikely(!host->ports[i]->ledtrig))
+ continue;
+ snprintf(host->ports[i]->ledtrig_name,
+ sizeof(host->ports[i]->ledtrig_name), "ata%u",
+ host->ports[i]->print_id);
+
+ host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
+
+ if (led_trigger_register(host->ports[i]->ledtrig)) {
+ kfree(host->ports[i]->ledtrig);
+ host->ports[i]->ledtrig = NULL;
+ }
+ }
+#endif
/* Create associated sysfs transport objects */
for (i = 0; i < host->n_ports; i++) {
rc = ata_tport_add(host->dev,host->ports[i]);
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -38,6 +38,9 @@
#include <linux/acpi.h>
#include <linux/cdrom.h>
#include <linux/sched.h>
+#ifdef CONFIG_ATA_LEDS
+#include <linux/leds.h>
+#endif
/*
* Define if arch has non-standard setup. This is a _PCI_ standard
@@ -890,6 +893,12 @@ struct ata_port {
#ifdef CONFIG_ATA_ACPI
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
+
+#ifdef CONFIG_ATA_LEDS
+ struct led_trigger *ledtrig;
+ char ledtrig_name[8];
+#endif
+
/* owned by EH */
u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
};