openwrtv3/target/linux/layerscape/patches-4.4/8048-mmc-sdhci-of-esdhc-add-remove-some-quirks-according-.patch
Yutang Jiang c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

60 lines
1.9 KiB
Diff

From dfc4661c2499aeb0a43b8a13b55213d1c190f640 Mon Sep 17 00:00:00 2001
From: yangbo lu <yangbo.lu@freescale.com>
Date: Tue, 19 Apr 2016 09:47:15 +0800
Subject: [PATCH 48/70] mmc: sdhci-of-esdhc: add/remove some quirks according
to vendor version
commit 6c42cb309fee2e126beed6b96a986dc7d85a033d
[context adjustment]
A previous patch had removed esdhc_of_platform_init() by mistake.
static void esdhc_of_platform_init(struct sdhci_host *host)
{
u32 vvn;
vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
if (vvn == VENDOR_V_22)
host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
if (vvn > VENDOR_V_22)
host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
}
This patch is used to fix it by add/remove some quirks according to
verdor version in probe.
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Fixes: f4932cfd22f1 ("mmc: sdhci-of-esdhc: support both BE and LE host controller")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
---
drivers/mmc/host/sdhci-of-esdhc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -584,6 +584,8 @@ static int sdhci_esdhc_probe(struct plat
{
struct sdhci_host *host;
struct device_node *np;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_esdhc *esdhc;
int ret;
np = pdev->dev.of_node;
@@ -611,6 +613,14 @@ static int sdhci_esdhc_probe(struct plat
if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+ pltfm_host = sdhci_priv(host);
+ esdhc = pltfm_host->priv;
+ if (esdhc->vendor_ver == VENDOR_V_22)
+ host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+ if (esdhc->vendor_ver > VENDOR_V_22)
+ host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
+
if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
/*
* Freescale messed up with P2020 as it has a non-standard