openwrtv3/target/linux/brcm47xx/image/Makefile
Rafał Miłecki 210803df03 brcm47xx: image: create standard TRX images using new building system
Apart from using our new building system there are 2 more changes:

1) Limit amount of images
So far we were generating all standard images (optimized one and two
with no loader) for every SUBTARGET. This is not needed, as e.g. the
only device requiring gzipped kernel is legacy Huawei E970.

2) Change output names
The new image building system requires specifying device name. This
forced picking some and resulted in:
openwrt-brcm47xx-$(SUBTARGET)-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-gz.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-noloader-nodictionary.trx
becoming:
openwrt-brcm47xx-$(SUBTARGET)-standard-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-gz-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-nodictionarylzma-squashfs.trx

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49006
2016-03-11 21:31:34 +00:00

407 lines
12 KiB
Makefile

#
# Copyright (C) 2006-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define Build/Clean
$(MAKE) -C lzma-loader clean
endef
define Image/Prepare
# Optimized LZMA compression (with dictionary), handled by lzma-loader.
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
# Less optimal LZMA compression (no dictionary), handled by CFE.
$(STAGING_DIR_HOST)/bin/lzma e -so -d16 $(KDIR)/vmlinux > $(KDIR)/vmlinux-nodictionary.lzma
gzip -nc9 $(KDIR)/vmlinux > $(KDIR)/vmlinux.gz
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
cat $(KDIR)/vmlinux-initramfs | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux-initramfs.lzma
$(STAGING_DIR_HOST)/bin/lzma e -so -d16 $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs-nodictionary.lzma
endif
rm -f $(KDIR)/loader.gz
$(MAKE) -C lzma-loader \
BUILD_DIR="$(KDIR)" \
TARGET="$(KDIR)" \
clean install
echo -ne "\\x00" >> $(KDIR)/loader.gz
rm -f $(KDIR)/fs_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
endef
define trxalign/jffs2-128k
-a 0x20000 -f $(KDIR)/root.$(1)
endef
define trxalign/jffs2-64k
-a 0x10000 -f $(KDIR)/root.$(1)
endef
define trxalign/squashfs
-a 1024 -f $(KDIR)/root.$(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark
endef
#################################################
# Images
#################################################
define Build/trx-with-loader
$(STAGING_DIR_HOST)/bin/trx \
-m 33554432 \
-o $@ \
-f $(KDIR)/loader.gz \
-f $(word 1,$^) \
$(call trxalign/$(FILESYSTEM),$(FILESYSTEM))
endef
define Build/trx-v2-with-loader
$(STAGING_DIR_HOST)/bin/trx \
-2 \
-m 33554432 \
-o $@.new \
-f $(KDIR)/loader.gz \
-f $(KDIR)/vmlinux.lzma \
$(call trxalign/$(FILESYSTEM),$(FILESYSTEM),$@)
mv $@.new $@
endef
define Build/trx-without-loader
$(STAGING_DIR_HOST)/bin/trx \
-m 33554432 \
-o $@ \
-f $(word 1,$^) \
$(call trxalign/$(FILESYSTEM),$(FILESYSTEM))
endef
define Build/asus-trx
$(STAGING_DIR_HOST)/bin/asustrx -p "$(PRODUCTID)" -i $@ -o $@.new
mv $@.new $@
endef
define Build/edimax-bin
$(STAGING_DIR_HOST)/bin/trx2edips $@ $@.new
mv $@.new $@
endef
define Build/huawei-bin
dd if=/dev/zero of=$@.new bs=92 count=1
echo -ne 'HDR0\x08\x00\x00\x00' >> $@.new
cat $@ >> $@.new
mv $@.new $@
endef
define Build/linksys-bin
$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(DEVICE_ID) -v v$(VERSION) $(if $(SERIAL),-s $(SERIAL)) -i $@ -o $@.new
mv $@.new $@
endef
define Build/linksys-pattern-partition
$(STAGING_DIR_HOST)/bin/addpattern -5 -p $(DEVICE_ID) -v v$(VERSION) $(if $(SERIAL),-s $(SERIAL)) -i /dev/null -o $@
endef
define Build/motorola-bin
$(STAGING_DIR_HOST)/bin/motorola-bin -$(MOTOROLA_DEVICE) $@ $@.new
mv $@.new $@
endef
define Build/prepend-with-elf
mv $@ $@.old
dd if=$(KDIR)/loader.elf of=$@ bs=131072 conv=sync
cat $@.old >> $@
endef
define Build/tailed-bin
echo $(BIN_TAIL) >> $@
endef
define Build/usrobotics-bin
$(STAGING_DIR_HOST)/bin/trx2usr $@ $@.new
mv $@.new $@
endef
#################################################
# Devices
#################################################
DEVICE_VARS += PRODUCTID
DEVICE_VARS += DEVICE_ID VERSION SERIAL
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION
DEVICE_VARS += MOTOROLA_DEVICE
DEVICE_VARS += BIN_TAIL
define Device/Default
KERNEL := kernel-bin
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
KERNEL_NAME = vmlinux.lzma
FILESYSTEMS := $(FS_64K)
IMAGES := trx
IMAGE/trx := trx-with-loader
endef
define Device/standard
endef
define Device/standard-noloader-gz
KERNEL_NAME = vmlinux.gz
IMAGE/trx := trx-without-loader
endef
define Device/standard-noloader-nodictionarylzma
KERNEL_NAME = vmlinux-nodictionary.lzma
IMAGE/trx := trx-without-loader
endef
define Device/asus
IMAGES := trx
IMAGE/trx := trx-with-loader | asus-trx
endef
define AsusDevice
define Device/asus-$(1)
$$(Device/asus)
PRODUCTID := $(2)
endef
TARGET_DEVICES += asus-$(1)
endef
define Device/linksys
IMAGES := bin
IMAGE/bin := trx-with-loader | linksys-bin
endef
define LinksysDevice
define Device/linksys-$(1)
$$(Device/linksys)
DEVICE_ID := $(2)
VERSION := $(3)
endef
TARGET_DEVICES += linksys-$(1)
endef
define Device/motorola
IMAGES := bin
IMAGE/bin := trx-with-loader | motorola-bin
endef
define MotorolaDevice
define Device/motorola-$(1)
$$(Device/motorola)
MOTOROLA_DEVICE := $(2)
endef
TARGET_DEVICES += motorola-$(1)
endef
define Device/netgear
IMAGES := chk
IMAGE/chk := trx-with-loader | netgear-chk
endef
define NetgearDevice
define Device/netgear-$(1)
$$(Device/netgear)
NETGEAR_BOARD_ID := $(2)
NETGEAR_REGION := $(3)
endef
TARGET_DEVICES += netgear-$(1)
endef
#################################################
# Subtarget generic
#################################################
ifeq ($(SUBTARGET),generic)
# BCM4705 with tg3
$(eval $(call LinksysDevice,wrt300n-v1.1,EWC2,1.51.2))
$(eval $(call LinksysDevice,wrt310n-v1,310N,1.0.10))
$(eval $(call LinksysDevice,wrt350n-v1,EWCG,1.04.1))
$(eval $(call LinksysDevice,wrt610n-v1,610N,1.0.1))
# BCMA SoC with SSB WiFi
$(eval $(call LinksysDevice,wrt610n-v2,610N,2.0.0))
$(eval $(call LinksysDevice,e3000-v1,61XN,1.0.3))
TARGET_DEVICES += standard
endif
#################################################
# Subtarget legacy
#################################################
define Device/dlink-dwl-3150
IMAGES := bin
IMAGE/bin := trx-with-loader | tailed-bin
BIN_TAIL := BCM-5352-2050-0000000-01
endef
define Device/edimax-ps1208-mfg
IMAGES := bin
IMAGE/bin := trx-with-loader | edimax-bin
endef
define Device/huawei-e970
KERNEL_NAME = vmlinux.gz
IMAGES := bin
IMAGE/bin := trx-without-loader | huawei-bin
endef
define Device/linksys-wrt54g3gv2-vf
FILESYSTEMS := $(FS_128K)
IMAGES := noheader.bin bin
IMAGE/noheader.bin := linksys-pattern-partition | trx-v2-with-loader
IMAGE/bin := linksys-pattern-partition | trx-v2-with-loader | linksys-bin
DEVICE_ID := 3G2V
VERSION := 3.00.24
SERIAL := 6
endef
define Device/linksys-wrt54gs
$(Device/linksys)
FILESYSTEMS := $(FS_128K)
DEVICE_ID := W54S
VERSION := 4.80.1
endef
define Device/linksys-wrtsl54gs
$(Device/linksys)
FILESYSTEMS := $(FS_128K)
DEVICE_ID := W54U
VERSION := 2.08.1
endef
define Device/netgear-wgt634u
FILESYSTEMS := $(FS_128K)
IMAGES := bin
IMAGE/bin := trx-with-loader | prepend-with-elf
endef
define Device/usrobotics-usr5461
IMAGES := bin
IMAGE/bin := trx-with-loader | usrobotics-bin
endef
ifeq ($(SUBTARGET),legacy)
TARGET_DEVICES += \
dlink-dwl-3150 \
edimax-ps1208-mfg \
huawei-e970 \
linksys-wrt54g3gv2-vf \
linksys-wrt54gs \
linksys-wrtsl54gs \
netgear-wgt634u \
usrobotics-usr5461
$(eval $(call AsusDevice,wl-300g,WL300g ))
$(eval $(call AsusDevice,wl-320gp,WL320gP ))
$(eval $(call AsusDevice,wl-330ge,WL-330gE ))
$(eval $(call AsusDevice,wl-500gp-v1,WL500gp ))
$(eval $(call AsusDevice,wl-500gp-v2,WL500gpv2 ))
$(eval $(call AsusDevice,wl-500w,WL500W ))
$(eval $(call AsusDevice,wl-520gu,WL520gu ))
$(eval $(call AsusDevice,wl-550ge,WL550gE ))
$(eval $(call AsusDevice,wl-hdd25,WLHDD ))
$(eval $(call LinksysDevice,wrt54g3g,W54F,2.20.1))
$(eval $(call LinksysDevice,wrt54g3g-em,W3GN,2.20.1))
$(eval $(call LinksysDevice,wrt54g,W54G,4.71.1))
$(eval $(call LinksysDevice,wrt54gs-v4,W54s,1.09.1))
$(eval $(call LinksysDevice,wrt150n,N150,1.51.3))
$(eval $(call LinksysDevice,wrt160n-v1,N150,1.50.1))
$(eval $(call LinksysDevice,wrt300n-v1,EWCB,1.03.6))
$(eval $(call MotorolaDevice,wa840g,2))
$(eval $(call MotorolaDevice,we800g,3))
$(eval $(call MotorolaDevice,wr850g,1))
$(eval $(call NetgearDevice,wgr614-v8,U12H072T00_NETGEAR,2))
$(eval $(call NetgearDevice,wndr3300-v1,U12H093T00_NETGEAR,2))
$(eval $(call NetgearDevice,wnr834b-v2,U12H081T00_NETGEAR,2))
TARGET_DEVICES += standard standard-noloader-gz
endif
#################################################
# Subtarget mips74k
#################################################
ifeq ($(SUBTARGET),mips74k)
$(eval $(call AsusDevice,rt-ac53u,RT-AC53U))
# $(eval $(call AsusDevice,rt-ac66u,RT-AC66U))
$(eval $(call AsusDevice,rt-n10,RT-N10 ))
$(eval $(call AsusDevice,rt-n10p,RT-N10P))
$(eval $(call AsusDevice,rt-n10p-v2,RT-N10PV2))
$(eval $(call AsusDevice,rt-n10u,RT-N10U))
$(eval $(call AsusDevice,rt-n10u-b,RT-N10U))
$(eval $(call AsusDevice,rt-n12,RT-N12 ))
$(eval $(call AsusDevice,rt-n12-b1,RT-N12B1))
$(eval $(call AsusDevice,rt-n12-c1,RT-N12C1))
$(eval $(call AsusDevice,rt-n12-d1,RT-N12D1))
$(eval $(call AsusDevice,rt-n12hp,RT-N12HP))
$(eval $(call AsusDevice,rt-n14uhp,RT-N14UHP))
$(eval $(call AsusDevice,rt-n15u,RT-N15U))
$(eval $(call AsusDevice,rt-n16,RT-N16))
$(eval $(call AsusDevice,rt-n53,RT-N53))
$(eval $(call AsusDevice,rt-n66u,RT-N66U))
$(eval $(call AsusDevice,rt-n66w,RT-N66U))
$(eval $(call LinksysDevice,wrt160n-v3,N150,3.0.3))
$(eval $(call LinksysDevice,wrt310n-v2,310N,2.0.1))
$(eval $(call LinksysDevice,wrt320n-v1,320N,1.0.5))
$(eval $(call LinksysDevice,e900-v1,E900,1.0.4))
$(eval $(call LinksysDevice,e1000-v1-v2-v2.1,E100,1.1.3))
$(eval $(call LinksysDevice,e1200-v1,E120,1.0.3))
$(eval $(call LinksysDevice,e1200-v2,E122,1.0.4))
$(eval $(call LinksysDevice,e1500-v1,E150,1.0.5))
$(eval $(call LinksysDevice,e1550-v1,1550,1.0.3))
$(eval $(call LinksysDevice,e2000-v1,32XN,1.0.4))
$(eval $(call LinksysDevice,e2500-v1,E25X,1.0.7))
$(eval $(call LinksysDevice,e2500-v2,E25X,2.0.0))
$(eval $(call LinksysDevice,e2500-v2.1,25RU,2.1.0))
$(eval $(call LinksysDevice,e2500-v3,25V3,3.0.0))
$(eval $(call LinksysDevice,e3200-v1,3200,1.0.1))
$(eval $(call LinksysDevice,e4200-v1,4200,1.0.5))
$(eval $(call NetgearDevice,wgr614-v10_north-america,U12H139T01_NETGEAR,2))
$(eval $(call NetgearDevice,wgr614-v10_other-regions,U12H139T01_NETGEAR,1))
$(eval $(call NetgearDevice,wn2500rp-v1,U12H197T00_NETGEAR,1))
$(eval $(call NetgearDevice,wndr3400-v1,U12H155T00_NETGEAR,2))
$(eval $(call NetgearDevice,wndr3400-v2,U12H187T00_NETGEAR,2))
$(eval $(call NetgearDevice,wndr3400-v3,U12H208T00_NETGEAR,1))
$(eval $(call NetgearDevice,wndr3700-v3,U12H194T00_NETGEAR,2))
# $(eval $(call NetgearDevice,wndr3400-vcna,U12H155T01_NETGEAR,2))
$(eval $(call NetgearDevice,wndr4000,U12H181T00_NETGEAR,2))
$(eval $(call NetgearDevice,wnr1000-v3,U12H139T00_NETGEAR,2))
$(eval $(call NetgearDevice,wnr2000v2,U12H114T00_NETGEAR,2))
$(eval $(call NetgearDevice,wnr3000rp,U12H163T01_NETGEAR,1))
$(eval $(call NetgearDevice,wnr3500l-v1-north-america,U12H136T99_NETGEAR,2))
$(eval $(call NetgearDevice,wnr3500l-v1-other-regions,U12H136T99_NETGEAR,1))
$(eval $(call NetgearDevice,wnr3500l-v2,U12H172T00_NETGEAR,1))
# $(eval $(call NetgearDevice,wnr3500u,U12H136T00_NETGEAR,2))
$(eval $(call NetgearDevice,wnr3500-v2,U12H127T00_NETGEAR,2))
# $(eval $(call NetgearDevice,wnr3500-v2-vc,U12H127T70_NETGEAR,2))
TARGET_DEVICES += standard standard-noloader-nodictionarylzma
endif
#################################################
# Shared BuildImage defines
#################################################
define Image/Build/Initramfs
$(STAGING_DIR_HOST)/bin/trx \
-m 33554432 \
-o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx \
-f $(KDIR)/loader.gz \
-f $(KDIR)/vmlinux-initramfs.lzma
$(STAGING_DIR_HOST)/bin/trx \
-m 33554432 \
-o $(BIN_DIR)/$(IMG_PREFIX)-initramfs-noloader-nodictionary.trx \
-f $(KDIR)/vmlinux-initramfs-nodictionary.lzma
endef
# $(1): filesystem type.
define Image/Build
# TODO: Move it to Device/*
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
$(call Image/Build/Initramfs)
endif
endef
$(eval $(call BuildImage))