No description
Find a file
Geoff Levand 0142b07983 kexec-tools: Remove the unused file kexec.sh
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>

SVN-Revision: 17376
2009-08-24 20:13:39 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include merge the control file and the .ipk file targets into one to prevent them from going out of sync 2009-08-20 15:48:41 +00:00
package kexec-tools: Remove the unused file kexec.sh 2009-08-24 20:13:39 +00:00
scripts add nommu target feature flag 2009-08-21 22:32:03 +00:00
target add 2.6.31 config 2009-08-24 19:58:38 +00:00
toolchain add a heavily cleaned up version of ubicom32 toolchain support 2009-08-21 22:31:47 +00:00
tools update mpfr to 2.4.1 2009-08-20 16:08:52 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add menuconfig option for selecting initramfs compression 2009-08-16 05:35:34 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
rules.mk move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages 2009-08-20 15:31:17 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org