openwrtv3/target/linux/brcm63xx/patches-4.4/536-board_fast2704.patch
Jonas Gorski 0127c480bb brcm63xx: Neufbox 6: fix switch by probing through DT
Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00

75 lines
1.8 KiB
Diff

From: Marcin Jurkowski <marcin1j@gmail.com>
Date: Thu, 31 Oct 2013 22:33:10 +0000
Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
router
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
router.
It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
modem equipped with 64 MiB RAM and 8 MiB flash.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
---
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -387,6 +387,44 @@ static struct board_info __initdata boar
},
},
};
+
+static struct board_info __initdata board_FAST2704V2 = {
+ .name = "F@ST2704V2",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .has_usbd = 1,
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6328 */
/*
@@ -1766,6 +1804,7 @@ static const struct board_info __initcon
&board_963281TAN,
&board_A4001N1,
&board_dsl_274xb_f1,
+ &board_FAST2704V2,
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,
@@ -1841,6 +1880,7 @@ static struct of_device_id const bcm963x
{ .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
+ { .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },