/dts-v1/; #include "ar9.dtsi" #include / { compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9"; model = "Buffalo WBMR-HP-G300H"; chosen { bootargs = "console=ttyLTQ0,115200"; }; aliases { led-boot = &power_green; led-failsafe = &power_red; led-running = &power_green; led-dsl = &dsl; led-internet = &online_green; led-usb = &led_usb; led-wifi = &wifi; }; memory@0 { reg = <0x0 0x4000000>; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; wps { label = "wps"; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio 37 GPIO_ACTIVE_LOW>; linux,code = ; }; eject { label = "eject"; gpios = <&gpio 34 GPIO_ACTIVE_LOW>; linux,code = ; }; movie { label = "movie"; gpios = <&gpio 22 GPIO_ACTIVE_LOW>; linux,code = ; }; }; gpio-leds { compatible = "gpio-leds"; power_green: power { label = "wbmr:green:power"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; default-state = "keep"; }; power_red: power2 { label = "wbmr:red:power"; gpios = <&gpio 5 GPIO_ACTIVE_LOW>; }; security { label = "wbmr:yellow:security"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; wifi: wifi { label = "wbmr:green:wireless"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; dsl: dsl { label = "wbmr:green:dsl"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; online_green: online { label = "wbmr:green:internet"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; online2 { label = "wbmr:red:internet"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; movie { label = "wbmr:blue:movie"; gpios = <&gpio 20 GPIO_ACTIVE_LOW>; }; led_usb: usb { label = "wbmr:green:usb"; gpios = <&gpio 28 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; }; &gpio { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { pci-in { lantiq,groups = "req1"; lantiq,output = <0>; lantiq,open-drain = <1>; lantiq,pull = <2>; }; pci-out { lantiq,groups = "gnt1"; lantiq,output = <1>; lantiq,pull = <0>; }; pci_rst { lantiq,pins = "io21"; lantiq,pull = <0>; lantiq,output = <1>; }; }; }; &gsw { phy-mode = "rgmii"; mtd-mac-address = <&boardconfig 0x10024>; }; &pci0 { status = "okay"; }; &localbus { nor@0 { compatible = "lantiq,nor"; bank-width = <2>; reg = <0 0x0 0x2000000>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "uboot"; reg = <0x00000 0x40000>; read-only; }; partition@40000 { label = "uboot_env"; reg = <0x40000 0x20000>; read-only; }; partition@20000 { label = "firmware"; reg = <0x60000 0x1f20000>; }; boardconfig: partition@1fc0000 { label = "board"; reg = <0x1fc0000 0x20000>; read-only; }; partition@1fe0000 { label = "calibration"; reg = <0x1fe0000 0x20000>; read-only; }; }; }; }; &usb0 { status = "okay"; gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; };