--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -263,6 +263,141 @@ static struct board_info __initdata boar }, }, }; + +static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { + { .offset = 96, .value = 0x2046 }, + { .offset = 97, .value = 0xfe9d }, + { .offset = 98, .value = 0x1854 }, + { .offset = 99, .value = 0xfa59 }, + { .offset = 112, .value = 0x2046 }, + { .offset = 113, .value = 0xfe79 }, + { .offset = 114, .value = 0x17f5 }, + { .offset = 115, .value = 0xfa47 }, + { .offset = 161, .value = 0x2222 }, + { .offset = 162, .value = 0x2222 }, + { .offset = 169, .value = 0x2222 }, + { .offset = 170, .value = 0x2222 }, + { .offset = 171, .value = 0x5555 }, + { .offset = 172, .value = 0x5555 }, + { .offset = 173, .value = 0x4444 }, + { .offset = 174, .value = 0x4444 }, + { .offset = 175, .value = 0x5555 }, + { .offset = 176, .value = 0x5555 }, +}; + +static struct board_info __initdata board_dsl_2751b_d1 = { + .name = "AW5200B", + .expected_cpu_id = 0x6318, + + .has_uart0 = 1, + .has_pci = 1, + .use_fallback_sprom = 1, + + .has_enetsw = 1, + + .has_ohci0 = 1, + .has_ehci0 = 1, + .num_usbh_ports = 1, + + .enetsw = { + .used_ports = { + [0] = { + .used = 1, + .phy_id = 1, + .name = "Port 1", + }, + [1] = { + .used = 1, + .phy_id = 2, + .name = "Port 2", + }, + [2] = { + .used = 1, + .phy_id = 3, + .name = "Port 3", + }, + [3] = { + .used = 1, + .phy_id = 4, + .name = "Port 4", + }, + }, + }, + + .leds = { + { + .name = "dsl-275xb:green:power", + .gpio = 3, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "dsl-275xb:green:inet", + .gpio = 8, + .active_low = 1, + }, + { + .name = "dsl-275xb:red:inet-fail", + .gpio = 9, + .active_low = 1, + }, + { + .name = "dsl-275xb:red:post-failed", + .gpio = 11, + .active_low = 1, + }, + { + .name = "dsl-275xb:wps:blue", + .gpio = 16, + .active_low = 1, + }, + { + .name = "dsl-275xb:green:dsl", + .gpio = 17, + .active_low = 1, + }, + { + .name = "dsl-275xb:green:usb", + .gpio = 49, /* FIXME: does not work! */ + .active_low = 1, + }, + }, + + .buttons = { + { + .desc = "wlan", + .gpio = 2, + .active_low = 1, + .type = EV_KEY, + .code = KEY_WLAN, + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, + }, + { + .desc = "wps", + .gpio = 33, + .active_low = 1, + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, + }, + { + .desc = "reset", + .gpio = 34, + .active_low = 1, + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, + }, + }, + + .fallback_sprom = { + .type = SPROM_BCM43217, + .pci_bus = 1, + .pci_dev = 0, + .board_fixups = dsl2751b_e1_fixups, + .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), + }, +}; #endif /* @@ -5271,6 +5406,7 @@ static const struct board_info __initcon #ifdef CONFIG_BCM63XX_CPU_6318 &board_96318ref, &board_96318ref_p300, + &board_dsl_2751b_d1, #endif #ifdef CONFIG_BCM63XX_CPU_6328 &board_96328avng,