From fec11d4e8dc5cc79bcd7c8fd55038ac21ac39965 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 16 Mar 2014 05:22:39 +0000 Subject: [PATCH 04/53] MIPS: ralink: add MT7621 pcie driver Signed-off-by: John Crispin <blogic@openwrt.org> --- arch/mips/pci/Makefile | 1 + arch/mips/pci/pci-mt7621.c | 813 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 814 insertions(+) create mode 100644 arch/mips/pci/pci-mt7621.c --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops obj-$(CONFIG_LANTIQ) += fixup-lantiq.o obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o +obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o --- /dev/null +++ b/arch/mips/pci/pci-mt7621.c @@ -0,0 +1,836 @@ +/************************************************************************** + * + * BRIEF MODULE DESCRIPTION + * PCI init for Ralink RT2880 solution + * + * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + ************************************************************************** + * May 2007 Bruce Chang + * Initial Release + * + * May 2009 Bruce Chang + * support RT2880/RT3883 PCIe + * + * May 2011 Bruce Chang + * support RT6855/MT7620 PCIe + * + ************************************************************************** + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/version.h> +#include <asm/pci.h> +#include <asm/io.h> +#include <asm/mips-cm.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> + +#include <ralink_regs.h> + +extern void pcie_phy_init(void); +extern void chk_phy_pll(void); + +/* + * These functions and structures provide the BIOS scan and mapping of the PCI + * devices. + */ + +#define CONFIG_PCIE_PORT0 +#define CONFIG_PCIE_PORT1 +#define CONFIG_PCIE_PORT2 +#define RALINK_PCIE0_CLK_EN (1<<24) +#define RALINK_PCIE1_CLK_EN (1<<25) +#define RALINK_PCIE2_CLK_EN (1<<26) + +#define RALINK_PCI_CONFIG_ADDR 0x20 +#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 +#define RALINK_INT_PCIE0 pcie_irq[0] +#define RALINK_INT_PCIE1 pcie_irq[1] +#define RALINK_INT_PCIE2 pcie_irq[2] +#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) +#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) +#define RALINK_PCIE0_RST (1<<24) +#define RALINK_PCIE1_RST (1<<25) +#define RALINK_PCIE2_RST (1<<26) +#define RALINK_SYSCTL_BASE 0xBE000000 + +#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) +#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) +#define RALINK_PCI_BASE 0xBE140000 + +#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000) +#define RT6855_PCIE0_OFFSET 0x2000 +#define RT6855_PCIE1_OFFSET 0x3000 +#define RT6855_PCIE2_OFFSET 0x4000 + +#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010) +#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018) +#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030) +#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034) +#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038) +#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050) +#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060) +#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064) + +#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010) +#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018) +#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030) +#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034) +#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038) +#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050) +#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060) +#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064) + +#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010) +#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018) +#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030) +#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034) +#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038) +#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050) +#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060) +#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064) + +#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000) +#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000) + + +#define MV_WRITE(ofs, data) \ + *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data) +#define MV_READ(ofs, data) \ + *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs))) +#define MV_READ_DATA(ofs) \ + le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs))) + +#define MV_WRITE_16(ofs, data) \ + *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data) +#define MV_READ_16(ofs, data) \ + *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs))) + +#define MV_WRITE_8(ofs, data) \ + *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data +#define MV_READ_8(ofs, data) \ + *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) + + + +#define RALINK_PCI_MM_MAP_BASE 0x60000000 +#define RALINK_PCI_IO_MAP_BASE 0x1e160000 + +#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000 +#define GPIO_PERST +#define ASSERT_SYSRST_PCIE(val) do { \ + if (*(unsigned int *)(0xbe00000c) == 0x00030101) \ + RALINK_RSTCTRL |= val; \ + else \ + RALINK_RSTCTRL &= ~val; \ + } while(0) +#define DEASSERT_SYSRST_PCIE(val) do { \ + if (*(unsigned int *)(0xbe00000c) == 0x00030101) \ + RALINK_RSTCTRL &= ~val; \ + else \ + RALINK_RSTCTRL |= val; \ + } while(0) +#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14) +#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30) +#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34) +#define RALINK_GPIOMODE *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60) +#define RALINK_PCIE_CLK_GEN *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c) +#define RALINK_PCIE_CLK_GEN1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80) +#define PPLL_CFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c) +#define PPLL_DRV *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0) +//RALINK_SYSCFG1 bit +#define RALINK_PCI_HOST_MODE_EN (1<<7) +#define RALINK_PCIE_RC_MODE_EN (1<<8) +//RALINK_RSTCTRL bit +#define RALINK_PCIE_RST (1<<23) +#define RALINK_PCI_RST (1<<24) +//RALINK_CLKCFG1 bit +#define RALINK_PCI_CLK_EN (1<<19) +#define RALINK_PCIE_CLK_EN (1<<21) +//RALINK_GPIOMODE bit +#define PCI_SLOTx2 (1<<11) +#define PCI_SLOTx1 (2<<11) +//MTK PCIE PLL bit +#define PDRV_SW_SET (1<<31) +#define LC_CKDRVPD_ (1<<19) + +#define MEMORY_BASE 0x0 +static int pcie_link_status = 0; + +#define PCI_ACCESS_READ_1 0 +#define PCI_ACCESS_READ_2 1 +#define PCI_ACCESS_READ_4 2 +#define PCI_ACCESS_WRITE_1 3 +#define PCI_ACCESS_WRITE_2 4 +#define PCI_ACCESS_WRITE_4 5 + +static int pcie_irq[3]; + +static int config_access(unsigned char access_type, struct pci_bus *bus, + unsigned int devfn, unsigned int where, u32 * data) +{ + unsigned int slot = PCI_SLOT(devfn); + u8 func = PCI_FUNC(devfn); + uint32_t address_reg, data_reg; + unsigned int address; + + address_reg = RALINK_PCI_CONFIG_ADDR; + data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG; + + address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; + MV_WRITE(address_reg, address); + + switch(access_type) { + case PCI_ACCESS_WRITE_1: + MV_WRITE_8(data_reg+(where&0x3), *data); + break; + case PCI_ACCESS_WRITE_2: + MV_WRITE_16(data_reg+(where&0x3), *data); + break; + case PCI_ACCESS_WRITE_4: + MV_WRITE(data_reg, *data); + break; + case PCI_ACCESS_READ_1: + MV_READ_8( data_reg+(where&0x3), data); + break; + case PCI_ACCESS_READ_2: + MV_READ_16(data_reg+(where&0x3), data); + break; + case PCI_ACCESS_READ_4: + MV_READ(data_reg, data); + break; + default: + printk("no specify access type\n"); + break; + } + return 0; +} + +static int +read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val) +{ + return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val); +} + +static int +read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val) +{ + return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val); +} + +static int +read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val) +{ + return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val); +} + +static int +write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val) +{ + if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static int +write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val) +{ + if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static int +write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val) +{ + if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + + +static int +pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) +{ + switch (size) { + case 1: + return read_config_byte(bus, devfn, where, (u8 *) val); + case 2: + return read_config_word(bus, devfn, where, (u16 *) val); + default: + return read_config_dword(bus, devfn, where, val); + } +} + +static int +pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) +{ + switch (size) { + case 1: + return write_config_byte(bus, devfn, where, (u8) val); + case 2: + return write_config_word(bus, devfn, where, (u16) val); + default: + return write_config_dword(bus, devfn, where, val); + } +} + +struct pci_ops mt7621_pci_ops= { + .read = pci_config_read, + .write = pci_config_write, +}; + +static struct resource mt7621_res_pci_mem1 = { + .name = "PCI MEM1", + .start = RALINK_PCI_MM_MAP_BASE, + .end = (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)), + .flags = IORESOURCE_MEM, +}; +static struct resource mt7621_res_pci_io1 = { + .name = "PCI I/O1", + .start = RALINK_PCI_IO_MAP_BASE, + .end = (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)), + .flags = IORESOURCE_IO, +}; + +static struct pci_controller mt7621_controller = { + .pci_ops = &mt7621_pci_ops, + .mem_resource = &mt7621_res_pci_mem1, + .io_resource = &mt7621_res_pci_io1, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, + .io_map_base = 0xa0000000, +}; + +static void +read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val) +{ + unsigned int address_reg, data_reg, address; + + address_reg = RALINK_PCI_CONFIG_ADDR; + data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG; + address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ; + MV_WRITE(address_reg, address); + MV_READ(data_reg, val); + return; +} + +static void +write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val) +{ + unsigned int address_reg, data_reg, address; + + address_reg = RALINK_PCI_CONFIG_ADDR; + data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG; + address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ; + MV_WRITE(address_reg, address); + MV_WRITE(data_reg, val); + return; +} + + +int __init +pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + u16 cmd; + u32 val; + int irq = 0; + + if ((dev->bus->number == 0) && (slot == 0)) { + write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); + read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); + printk("BAR0 at slot 0 = %x\n", val); + printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); + } else if((dev->bus->number == 0) && (slot == 0x1)) { + write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); + read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); + printk("BAR0 at slot 1 = %x\n", val); + printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); + } else if((dev->bus->number == 0) && (slot == 0x2)) { + write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); + read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); + printk("BAR0 at slot 2 = %x\n", val); + printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); + } else if ((dev->bus->number == 1) && (slot == 0x0)) { + switch (pcie_link_status) { + case 2: + case 6: + irq = RALINK_INT_PCIE1; + break; + case 4: + irq = RALINK_INT_PCIE2; + break; + default: + irq = RALINK_INT_PCIE0; + } + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number == 2) && (slot == 0x0)) { + switch (pcie_link_status) { + case 5: + case 6: + irq = RALINK_INT_PCIE2; + break; + default: + irq = RALINK_INT_PCIE1; + } + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number == 2) && (slot == 0x1)) { + switch (pcie_link_status) { + case 5: + case 6: + irq = RALINK_INT_PCIE2; + break; + default: + irq = RALINK_INT_PCIE1; + } + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number ==3) && (slot == 0x0)) { + irq = RALINK_INT_PCIE2; + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number ==3) && (slot == 0x1)) { + irq = RALINK_INT_PCIE2; + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else if ((dev->bus->number ==3) && (slot == 0x2)) { + irq = RALINK_INT_PCIE2; + printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); + } else { + printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); + return 0; + } + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14 + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10 + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); + return irq; +} + +void +set_pcie_phy(u32 *addr, int start_b, int bits, int val) +{ +// printk("0x%p:", addr); +// printk(" %x", *addr); + *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b); + *(unsigned int *)(addr) |= val << start_b; +// printk(" -> %x\n", *addr); +} + +void +bypass_pipe_rst(void) +{ +#if defined (CONFIG_PCIE_PORT0) + /* PCIe Port 0 */ + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] +#endif +#if defined (CONFIG_PCIE_PORT1) + /* PCIe Port 1 */ + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] +#endif +#if defined (CONFIG_PCIE_PORT2) + /* PCIe Port 2 */ + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] +#endif +} + +void +set_phy_for_ssc(void) +{ + unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10)); + + reg = (reg >> 6) & 0x7; +#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1) + /* Set PCIe Port0 & Port1 PHY to disable SSC */ + /* Debug Xtal Type */ + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable + if(reg <= 5 && reg >= 3) { // 40MHz Xtal + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode) + printk("***** Xtal 40MHz *****\n"); + } else { // 25MHz | 20MHz Xtal + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode) + if (reg >= 6) { + printk("***** Xtal 25MHz *****\n"); + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode) + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial + } else { + printk("***** Xtal 20MHz *****\n"); + } + } + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN + if(reg <= 5 && reg >= 3) { // 40MHz Xtal + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv + } + /* Enable PHY and disable force mode */ + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control +#endif +#if defined (CONFIG_PCIE_PORT2) + /* Set PCIe Port2 PHY to disable SSC */ + /* Debug Xtal Type */ + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable + if(reg <= 5 && reg >= 3) { // 40MHz Xtal + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode) + } else { // 25MHz | 20MHz Xtal + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode) + if (reg >= 6) { // 25MHz Xtal + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode) + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial + } + } + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN + if(reg <= 5 && reg >= 3) { // 40MHz Xtal + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv + } + /* Enable PHY and disable force mode */ + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable + set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control +#endif +} + +void setup_cm_memory_region(struct resource *mem_resource) +{ + resource_size_t mask; + if (mips_cm_numiocu()) { + /* FIXME: hardware doesn't accept mask values with 1s after + 0s (e.g. 0xffef), so it would be great to warn if that's + about to happen */ + mask = ~(mem_resource->end - mem_resource->start); + + write_gcr_reg1_base(mem_resource->start); + write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0); + printk("PCI coherence region base: 0x%08lx, mask/settings: 0x%08lx\n", + read_gcr_reg1_base(), + read_gcr_reg1_mask()); + } +} + +static int mt7621_pci_probe(struct platform_device *pdev) +{ + unsigned long val = 0; + int i; + + for (i = 0; i < 3; i++) + pcie_irq[i] = irq_of_parse_and_map(pdev->dev.of_node, i); + + iomem_resource.start = 0; + iomem_resource.end= ~0; + ioport_resource.start= 0; + ioport_resource.end = ~0; + +#if defined (CONFIG_PCIE_PORT0) + val = RALINK_PCIE0_RST; +#endif +#if defined (CONFIG_PCIE_PORT1) + val |= RALINK_PCIE1_RST; +#endif +#if defined (CONFIG_PCIE_PORT2) + val |= RALINK_PCIE2_RST; +#endif + ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST); + printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); +#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/ + *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3); + *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3; + mdelay(100); + *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3) + mdelay(100); + *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA + + mdelay(100); +#else + *(unsigned int *)(0xbe000060) &= ~0x00000c00; +#endif +#if defined (CONFIG_PCIE_PORT0) + val = RALINK_PCIE0_RST; +#endif +#if defined (CONFIG_PCIE_PORT1) + val |= RALINK_PCIE1_RST; +#endif +#if defined (CONFIG_PCIE_PORT2) + val |= RALINK_PCIE2_RST; +#endif + DEASSERT_SYSRST_PCIE(val); + printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); + + if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2 + bypass_pipe_rst(); + set_phy_for_ssc(); + printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); + +#if defined (CONFIG_PCIE_PORT0) + read_config(0, 0, 0, 0x70c, &val); + printk("Port 0 N_FTS = %x\n", (unsigned int)val); +#endif +#if defined (CONFIG_PCIE_PORT1) + read_config(0, 1, 0, 0x70c, &val); + printk("Port 1 N_FTS = %x\n", (unsigned int)val); +#endif +#if defined (CONFIG_PCIE_PORT2) + read_config(0, 2, 0, 0x70c, &val); + printk("Port 2 N_FTS = %x\n", (unsigned int)val); +#endif + + RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST); + RALINK_SYSCFG1 &= ~(0x30); + RALINK_SYSCFG1 |= (2<<4); + RALINK_PCIE_CLK_GEN &= 0x7fffffff; + RALINK_PCIE_CLK_GEN1 &= 0x80ffffff; + RALINK_PCIE_CLK_GEN1 |= 0xa << 24; + RALINK_PCIE_CLK_GEN |= 0x80000000; + mdelay(50); + RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST); + + +#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/ + *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA + mdelay(100); +#else + RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST +#endif + mdelay(500); + + + mdelay(500); +#if defined (CONFIG_PCIE_PORT0) + if(( RALINK_PCI0_STATUS & 0x1) == 0) + { + printk("PCIE0 no card, disable it(RST&CLK)\n"); + ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST); + RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN); + pcie_link_status &= ~(1<<0); + } else { + pcie_link_status |= 1<<0; + RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt + } +#endif +#if defined (CONFIG_PCIE_PORT1) + if(( RALINK_PCI1_STATUS & 0x1) == 0) + { + printk("PCIE1 no card, disable it(RST&CLK)\n"); + ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST); + RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN); + pcie_link_status &= ~(1<<1); + } else { + pcie_link_status |= 1<<1; + RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt + } +#endif +#if defined (CONFIG_PCIE_PORT2) + if (( RALINK_PCI2_STATUS & 0x1) == 0) { + printk("PCIE2 no card, disable it(RST&CLK)\n"); + ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST); + RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN); + pcie_link_status &= ~(1<<2); + } else { + pcie_link_status |= 1<<2; + RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt + } +#endif + if (pcie_link_status == 0) + return 0; + +/* +pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num +3'b000 x x x +3'b001 x x 0 +3'b010 x 0 x +3'b011 x 1 0 +3'b100 0 x x +3'b101 1 x 0 +3'b110 1 0 x +3'b111 2 1 0 +*/ + switch(pcie_link_status) { + case 2: + RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000; + RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0 + RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1 + break; + case 4: + RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000; + RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0 + RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1 + RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2 + break; + case 5: + RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000; + RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0 + RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1 + RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2 + break; + case 6: + RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000; + RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0 + RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1 + RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2 + break; + } + printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR); + //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL); + +/* + ioport_resource.start = mt7621_res_pci_io1.start; + ioport_resource.end = mt7621_res_pci_io1.end; +*/ + + RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE; + RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE; + +#if defined (CONFIG_PCIE_PORT0) + //PCIe0 + if((pcie_link_status & 0x1) != 0) { + RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE + RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE; + RALINK_PCI0_CLASS = 0x06040001; + printk("PCIE0 enabled\n"); + } +#endif +#if defined (CONFIG_PCIE_PORT1) + //PCIe1 + if ((pcie_link_status & 0x2) != 0) { + RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE + RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE; + RALINK_PCI1_CLASS = 0x06040001; + printk("PCIE1 enabled\n"); + } +#endif +#if defined (CONFIG_PCIE_PORT2) + //PCIe2 + if ((pcie_link_status & 0x4) != 0) { + RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE + RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE; + RALINK_PCI2_CLASS = 0x06040001; + printk("PCIE2 enabled\n"); + } +#endif + + + switch(pcie_link_status) { + case 7: + read_config(0, 2, 0, 0x4, &val); + write_config(0, 2, 0, 0x4, val|0x4); + // write_config(0, 1, 0, 0x4, val|0x7); + read_config(0, 2, 0, 0x70c, &val); + val &= ~(0xff)<<8; + val |= 0x50<<8; + write_config(0, 2, 0, 0x70c, val); + case 3: + case 5: + case 6: + read_config(0, 1, 0, 0x4, &val); + write_config(0, 1, 0, 0x4, val|0x4); + // write_config(0, 1, 0, 0x4, val|0x7); + read_config(0, 1, 0, 0x70c, &val); + val &= ~(0xff)<<8; + val |= 0x50<<8; + write_config(0, 1, 0, 0x70c, val); + default: + read_config(0, 0, 0, 0x4, &val); + write_config(0, 0, 0, 0x4, val|0x4); //bus master enable + // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable + read_config(0, 0, 0, 0x70c, &val); + val &= ~(0xff)<<8; + val |= 0x50<<8; + write_config(0, 0, 0, 0x70c, val); + } + + pci_load_of_ranges(&mt7621_controller, pdev->dev.of_node); + setup_cm_memory_region(mt7621_controller.mem_resource); + register_pci_controller(&mt7621_controller); + return 0; + +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +static const struct of_device_id mt7621_pci_ids[] = { + { .compatible = "mediatek,mt7621-pci" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt7621_pci_ids); + +static struct platform_driver mt7621_pci_driver = { + .probe = mt7621_pci_probe, + .driver = { + .name = "mt7621-pci", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mt7621_pci_ids), + }, +}; + +static int __init mt7621_pci_init(void) +{ + return platform_driver_register(&mt7621_pci_driver); +} + +arch_initcall(mt7621_pci_init);