/dts-v1/; #include "bcm6328.dtsi" #include <dt-bindings/input/input.h> / { model = "Sercomm AD1018 (SPI flash mod)"; compatible = "sercomm,ad1018-nor", "brcm,bcm6328"; chosen { bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; debounce-interval = <60>; wps { label = "wps"; gpios = <&pinctrl 24 1>; linux,code = <KEY_WPS_BUTTON>; }; wifi { label = "wifi"; gpios = <&pinctrl 25 1>; linux,code = <KEY_WLAN>; }; reset { label = "reset"; gpios = <&pinctrl 31 1>; linux,code = <KEY_RESTART>; }; }; }; &pinctrl { pinctrl_leds: leds { function = "led"; pins = "gpio0", "gpio1"; }; }; &leds { status = "ok"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>; brcm,serial-leds; brcm,serial-shift-inv; brcm,serial-dat-low; inet_red@0 { reg = <0>; active-low; label = "AD1018:red:internet"; }; inet_green@1 { reg = <1>; active-low; label = "AD1018:green:internet"; }; power_green@8 { reg = <8>; active-low; label = "AD1018:green:power"; default-state = "on"; }; adsl_green@10 { reg = <10>; active-low; label = "AD1018:green:adsl"; }; adsl_red@11 { reg = <11>; active-low; label = "AD1018:red:adsl"; }; phone_green@12 { reg = <12>; active-low; label = "AD1018:green:phone"; }; wps_green@13 { reg = <13>; active-low; label = "AD1018:green:wps"; }; wifi_green@14 { reg = <14>; active-low; label = "AD1018:green:wifi"; }; usb_green@15 { reg = <15>; active-low; label = "AD1018:green:usb"; }; ephy0_spd@17 { reg = <17>; brcm,hardware-controlled; }; }; &hsspi { status = "ok"; flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <16666667>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; reg = <0>; #address-cells = <1>; #size-cells = <1>; linux,part-probe = "bcm63xxpart"; partitions { compatible = "brcm,bcm963xx-cfe-nor-partitions"; }; }; }; &uart0 { status = "ok"; };