From 42ebff638003be18fab503b37de4ad7853244e95 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sat, 25 Feb 2017 15:58:22 +0000 Subject: mtd: nand: Check length of ID before reading bits per cell The table-based NAND identification currently reads the number of bits per cell from the 3rd byte of the extended ID. This is done for the so-called 'full ID' devices; i.e. devices that have a known length ID. However, if the ID length is shorter than three, there's no 3rd byte, and so it's wrong to read the bits per cell from there. Fix this by adding a check for the ID length. (picked from http://lists.infradead.org/pipermail/linux-mtd/2014-December/056764.html) Signed-off-by: Ezequiel Garcia --- drivers/mtd/nand/nand_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -4032,7 +4032,8 @@ static bool find_full_id_nand(struct mtd mtd->erasesize = type->erasesize; mtd->oobsize = type->oobsize; - chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); + if (type->id_len > 2) + chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); chip->chipsize = (uint64_t)type->chipsize << 20; chip->options |= type->options; chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);