From 42cb399df978a33539b95d668b3f973d927cb902 Mon Sep 17 00:00:00 2001 From: Daniel Schwierzeck Date: Mon, 17 Dec 2012 23:37:57 +0100 Subject: net: switchlib: add driver for REALTEK RTL8306 Signed-off-by: Oliver Muth Signed-off-by: Daniel Schwierzeck diff --git a/drivers/net/switch/Makefile b/drivers/net/switch/Makefile index 7400897..08c6972 100644 --- a/drivers/net/switch/Makefile +++ b/drivers/net/switch/Makefile @@ -13,6 +13,7 @@ COBJS-$(CONFIG_SWITCH_MULTI) += switch.o COBJS-$(CONFIG_SWITCH_PSB697X) += psb697x.o COBJS-$(CONFIG_SWITCH_ADM6996I) += adm6996i.o COBJS-$(CONFIG_SWITCH_AR8216) += ar8216.o +COBJS-$(CONFIG_SWITCH_RTL8306) += rtl8306.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/net/switch/rtl8306.c b/drivers/net/switch/rtl8306.c new file mode 100644 index 0000000..7a6a917 --- /dev/null +++ b/drivers/net/switch/rtl8306.c @@ -0,0 +1,332 @@ +/* + * Based on OpenWRT linux driver + * + * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com + * Copyright (C) 2009 Felix Fietkau + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#define DEBUG +#include +#include +#include +#include + +#define RTL8306_REG_PAGE 16 +#define RTL8306_REG_PAGE_LO (1 << 15) +#define RTL8306_REG_PAGE_HI (1 << 1) /* inverted */ +#define RTL8306_CHIPID 0x5988 + +#define RTL8306_NUM_VLANS 16 +#define RTL8306_NUM_PORTS 6 +#define RTL8306_PORT_CPU 5 +#define RTL8306_NUM_PAGES 4 +#define RTL8306_NUM_REGS 32 + +enum { + RTL_TYPE_S, + RTL_TYPE_SD, + RTL_TYPE_SDM, +}; + +struct rtl_reg { + int page; + int phy; + int reg; + int bits; + int shift; + int inverted; +}; + +enum rtl_regidx { + RTL_REG_CHIPID, + RTL_REG_CHIPVER, + RTL_REG_CHIPTYPE, + RTL_REG_CPUPORT, + + RTL_REG_EN_CPUPORT, + RTL_REG_EN_TAG_OUT, + RTL_REG_EN_TAG_CLR, + RTL_REG_EN_TAG_IN, + RTL_REG_TRAP_CPU, + RTL_REG_TRUNK_PORTSEL, + RTL_REG_EN_TRUNK, + RTL_REG_RESET, + RTL_REG_PHY_RESET, + RTL_REG_CPU_LINKUP, + + RTL_REG_VLAN_ENABLE, + RTL_REG_VLAN_FILTER, + RTL_REG_VLAN_TAG_ONLY, + RTL_REG_VLAN_TAG_AWARE, +#define RTL_VLAN_ENUM(id) \ + RTL_REG_VLAN##id##_VID, \ + RTL_REG_VLAN##id##_PORTMASK + RTL_VLAN_ENUM(0), + RTL_VLAN_ENUM(1), + RTL_VLAN_ENUM(2), + RTL_VLAN_ENUM(3), + RTL_VLAN_ENUM(4), + RTL_VLAN_ENUM(5), + RTL_VLAN_ENUM(6), + RTL_VLAN_ENUM(7), + RTL_VLAN_ENUM(8), + RTL_VLAN_ENUM(9), + RTL_VLAN_ENUM(10), + RTL_VLAN_ENUM(11), + RTL_VLAN_ENUM(12), + RTL_VLAN_ENUM(13), + RTL_VLAN_ENUM(14), + RTL_VLAN_ENUM(15), +#define RTL_PORT_ENUM(id) \ + RTL_REG_PORT##id##_PVID, \ + RTL_REG_PORT##id##_NULL_VID_REPLACE, \ + RTL_REG_PORT##id##_NON_PVID_DISCARD, \ + RTL_REG_PORT##id##_VID_INSERT, \ + RTL_REG_PORT##id##_TAG_INSERT, \ + RTL_REG_PORT##id##_LINK, \ + RTL_REG_PORT##id##_SPEED, \ + RTL_REG_PORT##id##_NWAY, \ + RTL_REG_PORT##id##_NRESTART, \ + RTL_REG_PORT##id##_DUPLEX, \ + RTL_REG_PORT##id##_RXEN, \ + RTL_REG_PORT##id##_TXEN, \ + RTL_REG_PORT##id##_LRNEN + RTL_PORT_ENUM(0), + RTL_PORT_ENUM(1), + RTL_PORT_ENUM(2), + RTL_PORT_ENUM(3), + RTL_PORT_ENUM(4), + RTL_PORT_ENUM(5), +}; + +static const struct rtl_reg rtl_regs[] = { + [RTL_REG_CHIPID] = { 0, 4, 30, 16, 0, 0 }, + [RTL_REG_CHIPVER] = { 0, 4, 31, 8, 0, 0 }, + [RTL_REG_CHIPTYPE] = { 0, 4, 31, 2, 8, 0 }, + + /* CPU port number */ + [RTL_REG_CPUPORT] = { 2, 4, 21, 3, 0, 0 }, + /* Enable CPU port function */ + [RTL_REG_EN_CPUPORT] = { 3, 2, 21, 1, 15, 1 }, + /* Enable CPU port tag insertion */ + [RTL_REG_EN_TAG_OUT] = { 3, 2, 21, 1, 12, 0 }, + /* Enable CPU port tag removal */ + [RTL_REG_EN_TAG_CLR] = { 3, 2, 21, 1, 11, 0 }, + /* Enable CPU port tag checking */ + [RTL_REG_EN_TAG_IN] = { 0, 4, 21, 1, 7, 0 }, + [RTL_REG_EN_TRUNK] = { 0, 0, 19, 1, 11, 1 }, + [RTL_REG_TRUNK_PORTSEL] = { 0, 0, 16, 1, 6, 1 }, + [RTL_REG_RESET] = { 0, 0, 16, 1, 12, 0 }, + [RTL_REG_PHY_RESET] = { 0, 0, 0, 1, 15, 0 }, + [RTL_REG_CPU_LINKUP] = { 0, 6, 22, 1, 15, 0 }, + [RTL_REG_TRAP_CPU] = { 3, 2, 22, 1, 6, 0 }, + + [RTL_REG_VLAN_TAG_ONLY] = { 0, 0, 16, 1, 8, 1 }, + [RTL_REG_VLAN_FILTER] = { 0, 0, 16, 1, 9, 1 }, + [RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16, 1, 10, 1 }, + [RTL_REG_VLAN_ENABLE] = { 0, 0, 18, 1, 8, 1 }, + +#define RTL_VLAN_REGS(id, phy, page, regofs) \ + [RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \ + [RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 } + RTL_VLAN_REGS( 0, 0, 0, 0), + RTL_VLAN_REGS( 1, 1, 0, 0), + RTL_VLAN_REGS( 2, 2, 0, 0), + RTL_VLAN_REGS( 3, 3, 0, 0), + RTL_VLAN_REGS( 4, 4, 0, 0), + RTL_VLAN_REGS( 5, 0, 1, 2), + RTL_VLAN_REGS( 6, 1, 1, 2), + RTL_VLAN_REGS( 7, 2, 1, 2), + RTL_VLAN_REGS( 8, 3, 1, 2), + RTL_VLAN_REGS( 9, 4, 1, 2), + RTL_VLAN_REGS(10, 0, 1, 4), + RTL_VLAN_REGS(11, 1, 1, 4), + RTL_VLAN_REGS(12, 2, 1, 4), + RTL_VLAN_REGS(13, 3, 1, 4), + RTL_VLAN_REGS(14, 4, 1, 4), + RTL_VLAN_REGS(15, 0, 1, 6), + +#define REG_PORT_SETTING(port, phy) \ + [RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \ + [RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \ + [RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \ + [RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \ + [RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \ + [RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \ + [RTL_REG_PORT##port##_LRNEN] = { 0, phy, 24, 1, 9, 0 }, \ + [RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \ + [RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \ + [RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \ + [RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \ + [RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 } + + REG_PORT_SETTING(0, 0), + REG_PORT_SETTING(1, 1), + REG_PORT_SETTING(2, 2), + REG_PORT_SETTING(3, 3), + REG_PORT_SETTING(4, 4), + REG_PORT_SETTING(5, 6), + +#define REG_PORT_PVID(phy, page, regofs) \ + { page, phy, 24 + regofs, 4, 12, 0 } + [RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0), + [RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0), + [RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0), + [RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0), + [RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0), + [RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2), +}; + +static void rtl_set_page(struct mii_dev *bus, unsigned int page) +{ + u16 pgsel; + + BUG_ON(page > RTL8306_NUM_PAGES); + + pgsel = bus->read(bus, 0, MDIO_DEVAD_NONE, RTL8306_REG_PAGE); + pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI); + + if (page & (1 << 0)) + pgsel |= RTL8306_REG_PAGE_LO; + + if (!(page & (1 << 1))) /* bit is inverted */ + pgsel |= RTL8306_REG_PAGE_HI; + + bus->write(bus, 0, MDIO_DEVAD_NONE, RTL8306_REG_PAGE, pgsel); + +} + +static __maybe_unused int rtl_w16(struct mii_dev *bus, unsigned int page, unsigned int phy, + unsigned int reg, u16 val) +{ + rtl_set_page(bus, page); + + bus->write(bus, phy, MDIO_DEVAD_NONE, reg, val); + bus->read(bus, phy, MDIO_DEVAD_NONE, reg); /* flush */ + + return 0; +} + +static int rtl_r16(struct mii_dev *bus, unsigned int page, unsigned int phy, + unsigned int reg) +{ + rtl_set_page(bus, page); + + return bus->read(bus, phy, MDIO_DEVAD_NONE, reg); +} + +static u16 rtl_rmw(struct mii_dev *bus, unsigned int page, unsigned int phy, + unsigned int reg, u16 mask, u16 val) +{ + u16 r; + + rtl_set_page(bus, page); + + r = bus->read(bus, phy, MDIO_DEVAD_NONE, reg); + r &= ~mask; + r |= val; + bus->write(bus, phy, MDIO_DEVAD_NONE, reg, r); + + return bus->read(bus, phy, MDIO_DEVAD_NONE, reg); /* flush */ +} + +static int rtl_get(struct mii_dev *bus, enum rtl_regidx s) +{ + const struct rtl_reg *r = &rtl_regs[s]; + u16 val; + + BUG_ON(s >= ARRAY_SIZE(rtl_regs)); + + if (r->bits == 0) /* unimplemented */ + return 0; + + val = rtl_r16(bus, r->page, r->phy, r->reg); + + if (r->shift > 0) + val >>= r->shift; + + if (r->inverted) + val = ~val; + + val &= (1 << r->bits) - 1; + + return val; +} + +static __maybe_unused int rtl_set(struct mii_dev *bus, enum rtl_regidx s, unsigned int val) +{ + const struct rtl_reg *r = &rtl_regs[s]; + u16 mask = 0xffff; + + BUG_ON(s >= ARRAY_SIZE(rtl_regs)); + + if (r->bits == 0) /* unimplemented */ + return 0; + + if (r->shift > 0) + val <<= r->shift; + + if (r->inverted) + val = ~val; + + if (r->bits != 16) { + mask = (1 << r->bits) - 1; + mask <<= r->shift; + } + + val &= mask; + + return rtl_rmw(bus, r->page, r->phy, r->reg, mask, val); +} + +static int rtl8306_probe(struct switch_device *dev) +{ + struct mii_dev *bus = dev->bus; + unsigned int chipid, chipver, chiptype; + + chipid = rtl_get(bus, RTL_REG_CHIPID); + chipver = rtl_get(bus, RTL_REG_CHIPVER); + chiptype = rtl_get(bus, RTL_REG_CHIPTYPE); + + debug("%s: chipid %x, chipver %x, chiptype %x\n", + __func__, chipid, chipver, chiptype); + + if (chipid == RTL8306_CHIPID) + return 0; + + return 1; +} + +static void rtl8306_setup(struct switch_device *dev) +{ + struct mii_dev *bus = dev->bus; + + /* initialize cpu port settings */ + rtl_set(bus, RTL_REG_CPUPORT, dev->cpu_port); + rtl_set(bus, RTL_REG_EN_CPUPORT, 1); + + /* enable phy 5 link status */ + rtl_set(bus, RTL_REG_CPU_LINKUP, 1); +// rtl_set(bus, RTL_REG_PORT5_TXEN, 1); +// rtl_set(bus, RTL_REG_PORT5_RXEN, 1); +// rtl_set(bus, RTL_REG_PORT5_LRNEN, 1); +#ifdef DEBUG + debug("%s: CPU link up: %i\n", + __func__, rtl_get(bus, RTL_REG_PORT5_LINK)); +#endif + +} + +static struct switch_driver rtl8306_drv = { + .name = "rtl8306", +}; + +void switch_rtl8306_init(void) +{ + /* For archs with manual relocation */ + rtl8306_drv.probe = rtl8306_probe; + rtl8306_drv.setup = rtl8306_setup; + + switch_driver_register(&rtl8306_drv); +} diff --git a/drivers/net/switch/switch.c b/drivers/net/switch/switch.c index 3e34a7f..2e1c668 100644 --- a/drivers/net/switch/switch.c +++ b/drivers/net/switch/switch.c @@ -26,6 +26,9 @@ void switch_init(void) #if defined(CONFIG_SWITCH_AR8216) switch_ar8216_init(); #endif +#if defined(CONFIG_SWITCH_RTL8306) + switch_rtl8306_init(); +#endif board_switch_init(); } diff --git a/include/switch.h b/include/switch.h index ae7b123..927b1d2 100644 --- a/include/switch.h +++ b/include/switch.h @@ -100,6 +100,7 @@ static inline void switch_setup(struct switch_device *dev) extern void switch_psb697x_init(void); extern void switch_adm6996i_init(void); extern void switch_ar8216_init(void); +extern void switch_rtl8306_init(void); #endif /* __SWITCH_H */ -- 1.8.3.2