// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include <dt-bindings/clock/ath79-clk.h> #include "ath79.dtsi" / { compatible = "qca,ar9330"; #address-cells = <1>; #size-cells = <1>; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; compatible = "mips,mips24Kc"; clocks = <&pll ATH79_CLK_CPU>; reg = <0>; }; }; chosen { bootargs = "console=ttyATH0,115200"; }; ahb { apb { ddr_ctrl: memory-controller@18000000 { compatible = "qca,ar7240-ddr-controller"; reg = <0x18000000 0x100>; #qca,ddr-wb-channel-cells = <1>; }; uart: uart@18020000 { compatible = "qca,ar9330-uart"; reg = <0x18020000 0x14>; interrupts = <3>; clocks = <&pll ATH79_CLK_REF>; clock-names = "uart"; status = "disabled"; }; gpio: gpio@18040000 { compatible = "qca,ar7100-gpio"; reg = <0x18040000 0x34>; interrupts = <2>; ngpios = <30>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; status = "disabled"; }; pll: pll-controller@18050000 { compatible = "qca,ar9330-pll"; reg = <0x18050000 0x100>; #clock-cells = <1>; }; rst: reset-controller@1806001c { compatible = "qca,ar7100-reset"; reg = <0x1806001c 0x4>; #reset-cells = <1>; }; }; usb: usb@1b000000 { compatible = "chipidea,usb2"; reg = <0x1b000000 0x200>; interrupts = <3>; resets = <&rst 5>; reset-names = "usb-host"; phy-names = "usb-phy"; phys = <&usb_phy>; status = "disabled"; }; spi: spi@1f000000 { compatible = "qca,ar7100-spi"; reg = <0x1f000000 0x10>; clocks = <&pll ATH79_CLK_AHB>; clock-names = "ahb"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; gmac: gmac@18070000 { compatible = "qca,ar9330-gmac"; reg = <0x18070000 0x4>; }; wmac: wmac@18100000 { compatible = "qca,ar9330-wmac"; reg = <0x18100000 0x20000>; interrupts = <2>; status = "disabled"; }; }; usb_phy: usb-phy { compatible = "qca,ar7200-usb-phy"; reset-names = "usb-phy", "usb-suspend-override"; resets = <&rst 4>, <&rst 3>; #phy-cells = <0>; status = "disabled"; }; }; &cpuintc { qca,ddr-wb-channel-interrupts = <2>, <3>; qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>; }; ð0 { compatible = "qca,ar9330-eth", "syscon"; pll-data = <0x00110000 0x00001099 0x00991099>; resets = <&rst 9>; reset-names = "mac"; }; &mdio0 { regmap = <ð1>; builtin-switch; resets = <&rst 23>; reset-names = "mdio"; }; &mdio1 { resets = <&rst 23>; reset-names = "mdio"; builtin-switch; }; ð1 { compatible = "qca,ar9330-eth", "syscon"; pll-data = <0x00110000 0x00001099 0x00991099>; phy-mode = "gmii"; resets = <&rst 13>; reset-names = "mac"; };