Enable access to GPIO chip and its pins for Atheros AR92xx
wireless devices. For now AR9285 and AR9287 are supported.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 48881
Support default state for platform LEDs connected to ath9k device.
Now LEDs are correctly set on or off at ath9k module initialization.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 48880
Enable platform-supplied WLAN LED name for ath9k device.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 48879
CVE-2016-0704
s2_srvr.c overwrite the wrong bytes in the master-key when applying
Bleichenbacher protection for export cipher suites. This provides a
Bleichenbacher oracle, and could potentially allow more efficient variants of
the DROWN attack.
CVE-2016-0703
s2_srvr.c did not enforce that clear-key-length is 0 for non-export ciphers.
If clear-key bytes are present for these ciphers, they *displace* encrypted-key
bytes. This leads to an efficient divide-and-conquer key recovery attack: if
an eavesdropper has intercepted an SSLv2 handshake, they can use the server as
an oracle to determine the SSLv2 master-key, using only 16 connections to the
server and negligible computation. More importantly, this leads to a more
efficient version of DROWN that is effective against non-export ciphersuites,
and requires no significant computation.
CVE-2016-0702
A side-channel attack was found which makes use of cache-bank conflicts on
the Intel Sandy-Bridge microarchitecture which could lead to the recovery of
RSA keys. The ability to exploit this issue is limited as it relies on an
attacker who has control of code in a thread running on the same hyper-
threaded core as the victim thread which is performing decryptions.
CVE-2016-0799
The internal |fmtstr| function used in processing a "%s" format string in
the BIO_*printf functions could overflow while calculating the length of a
string and cause an OOB read when printing very long strings. Additionally
the internal |doapr_outch| function can attempt to write to an OOB memory
location (at an offset from the NULL pointer) in the event of a memory
allocation failure. In 1.0.2 and below this could be caused where the size
of a buffer to be allocated is greater than INT_MAX. E.g. this could be in
processing a very long "%s" format string. Memory leaks can also occur.
The first issue may mask the second issue dependent on compiler behaviour.
These problems could enable attacks where large amounts of untrusted data is
passed to the BIO_*printf functions. If applications use these functions in
this way then they could be vulnerable. OpenSSL itself uses these functions
when printing out human-readable dumps of ASN.1 data. Therefore applications
that print this data could be vulnerable if the data is from untrusted sources.
OpenSSL command line applications could also be vulnerable where they print out
ASN.1 data, or if untrusted data is passed as command line arguments. Libssl is
not considered directly vulnerable. Additionally certificates etc received via
remote connections via libssl are also unlikely to be able to trigger these
issues because of message size limits enforced within libssl.
CVE-2016-0797
In the BN_hex2bn function the number of hex digits is calculated using an int
value |i|. Later |bn_expand| is called with a value of |i * 4|. For large
values of |i| this can result in |bn_expand| not allocating any memory because
|i * 4| is negative. This can leave the internal BIGNUM data field as NULL
leading to a subsequent NULL ptr deref. For very large values of |i|, the
calculation |i * 4| could be a positive value smaller than |i|. In this case
memory is allocated to the internal BIGNUM data field, but it is insufficiently
sized leading to heap corruption. A similar issue exists in BN_dec2bn. This
could have security consequences if BN_hex2bn/BN_dec2bn is ever called by user
applications with very large untrusted hex/dec data. This is anticipated to be
a rare occurrence. All OpenSSL internal usage of these functions use data that
is not expected to be untrusted, e.g. config file data or application command
line arguments. If user developed applications generate config file data based
on untrusted data then it is possible that this could also lead to security
consequences. This is also anticipated to be rare.
CVE-2016-0798
The SRP user database lookup method SRP_VBASE_get_by_user had confusing memory
management semantics; the returned pointer was sometimes newly allocated, and
sometimes owned by the callee. The calling code has no way of distinguishing
these two cases. Specifically, SRP servers that configure a secret seed to hide
valid login information are vulnerable to a memory leak: an attacker connecting
with an invalid username can cause a memory leak of around 300 bytes per
connection. Servers that do not configure SRP, or configure SRP but do not
configure a seed are not vulnerable. In Apache, the seed directive is known as
SSLSRPUnknownUserSeed. To mitigate the memory leak, the seed handling in
SRP_VBASE_get_by_user is now disabled even if the user has configured a seed.
Applications are advised to migrate to SRP_VBASE_get1_by_user. However, note
that OpenSSL makes no strong guarantees about the indistinguishability of valid
and invalid logins. In particular, computations are currently not carried out
in constant time.
CVE-2016-0705
A double free bug was discovered when OpenSSL parses malformed DSA private keys
and could lead to a DoS attack or memory corruption for applications that
receive DSA private keys from untrusted sources. This scenario is considered
rare.
CVE-2016-0800
A cross-protocol attack was discovered that could lead to decryption of TLS
sessions by using a server supporting SSLv2 and EXPORT cipher suites as a
Bleichenbacher RSA padding oracle. Note that traffic between clients and non-
vulnerable servers can be decrypted provided another server supporting SSLv2
and EXPORT ciphers (even with a different protocol such as SMTP, IMAP or POP)
shares the RSA keys of the non-vulnerable server. This vulnerability is known
as DROWN (CVE-2016-0800). Recovering one session key requires the attacker to
perform approximately 2^50 computation, as well as thousands of connections to
the affected server. A more efficient variant of the DROWN attack exists
against unpatched OpenSSL servers using versions that predate 1.0.2a, 1.0.1m,
1.0.0r and 0.9.8zf released on 19/Mar/2015 (see CVE-2016-0703 below). Users can
avoid this issue by disabling the SSLv2 protocol in all their SSL/TLS servers,
if they've not done so already. Disabling all SSLv2 ciphers is also sufficient,
provided the patches for CVE-2015-3197 (fixed in OpenSSL 1.0.1r and 1.0.2f)
have been deployed. Servers that have not disabled the SSLv2 protocol, and are
not patched for CVE-2015-3197 are vulnerable to DROWN even if all SSLv2
ciphers are nominally disabled, because malicious clients can force the use of
SSLv2 with EXPORT ciphers. OpenSSL 1.0.2g and 1.0.1s deploy the following
mitigation against DROWN: SSLv2 is now by default disabled at build-time.
Builds that are not configured with "enable-ssl2" will not support SSLv2.
Even if "enable-ssl2" is used, users who want to negotiate SSLv2 via the
version-flexible SSLv23_method() will need to explicitly call either of:
SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2); or SSL_clear_options(ssl,
SSL_OP_NO_SSLv2); as appropriate. Even if either of those is used, or the
application explicitly uses the version-specific SSLv2_method() or its client
or server variants, SSLv2 ciphers vulnerable to exhaustive search key recovery
have been removed. Specifically, the SSLv2 40-bit EXPORT ciphers, and SSLv2
56-bit DES are no longer available. In addition, weak ciphers in SSLv3 and up
are now disabled in default builds of OpenSSL. Builds that are not configured
with "enable-weak-ssl-ciphers" will not provide any "EXPORT" or "LOW" strength
ciphers.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48868
Opkg now uses sha256 by default and expects them. Making it optionally
understand md5s also and detect md5 sum so we can migrate from configuration
that used md5.
Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
SVN-Revision: 48867
This will be used to create a diff between the Lantiq annex A and the
annex B firmware.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48810
Enable setting a host-specific lease time for static hosts.
The new option is called "leasetime" and the format is similar
as for the default lease time: e.g. 12h, 3d, infinite
Default lease time is used for all hosts for which there is
no host-specific definition.
The option is added to /etc/config/dhcp for the selected hosts:
config host
option name 'Nexus'
option mac 'd8:50:66:55:59:7c'
option ip '192.168.1.245'
option leasetime '2h'
It gets appended to /var/etc/dnsmasq.conf like this:
dhcp-host=d8:50:66:55:59:7c,192.168.1.245,Nexus,2h
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48801
There are time that programs need to be notified of events from
subsystems that are not enumerated in the .json definition, e.g. QEMU
guest agent by default requires /dev/virtio-ports/org.qemu.guest_agent.0
which is a symlink to /dev/vportMpN from virtio-ports subsystem.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 48799
This activates the format warnings in this package and that makes it
possible to activate format-security checks.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48785
This patch adds extra parameter to switch LED trigger initialization
functions. New functionality maintains backward compatibility, so
calling functions without setting new speed_mask parameter works
as expected.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
SVN-Revision: 48776
oneshot and timer have the same configuration options, just a different
trigger name.
Signed-off-by: Karl Palsson <karlp@etactica.com>
SVN-Revision: 48770
Before r47933 Bit 1 (first bit) of xTSE Octet 1 (first octet) defaulted
to 1, which allowed T1.413 to operate.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
SVN-Revision: 48763
This adds option to build kernel module and firmware packages
for a Marvell 8686 SPI Wireless device
Signed-off-by: Joseph Honold <mozzwald@gmail.com>
SVN-Revision: 48750
Changeset r47775 introduced a wrong default value "n" for the ip applets
config search path, breaking the handling of named routing tables and other
objects having alias configurations.
Fix the issue by providing a proper default value aligned with the value
used by full iproute2.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48716
The Linux Distributed Switch Architecture drivers provide richer support than
the swconfig driver API in that each switch port gets its own interface which
allows protocols such as STP, LLDP, 802.1x etc.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 48713
Update also the library version of gmp to 6.1.0.
Switch download to use the GNU alias.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48712
This adds support for MPLS protocol including usage of lightweight tunnels.
Kernel size of vmlinuz.bin grows by ~8k.
Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 48710
Add support for Xilinx ZC702 Dev board
Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.
Patch is tested with Xilinx ZC702 Dev board with SD boot mode.
known issues:
- no QSPI driver in 4.4 kernel: no QSPI flash support
- USB is not working in 4.4 kernel
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>
create mode 100644 package/boot/uboot-zynq/Makefile
create mode 100644 target/linux/zynq/Makefile
create mode 100644 target/linux/zynq/base-files.mk
create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
create mode 100644 target/linux/zynq/base-files/etc/config/network
create mode 100644 target/linux/zynq/base-files/etc/inittab
create mode 100644 target/linux/zynq/config-4.4
create mode 100644 target/linux/zynq/image/Makefile
create mode 100755 target/linux/zynq/image/mkits.sh
create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
create mode 100644 target/linux/zynq/profiles/zc702.mk
SVN-Revision: 48697
Many gpio controllers 'cansleep' due to the fact that they are behind busses
e.g. i2c etc.
Using threaded irq's allows for 'sleep-able' gpio's to be used.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 48696
Seama header has MD5 similarly to TRX and its CRC32. We need to update
it after replacing anything in Seama entity content to make bootloader
accept it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48688
Update OpenWRT build tree to reflect changes in TLC-591xx LED family driver.
In kernels < 4.0 the driver was present in form of a patch for the TLC-59116 chip,
and was upstreamed later in kernels > 4.0 to support the entire chip family.
Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>
[jow: fix Kconfig symbol name]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48684
With this patch sysupgrade will write directly to the partitions
instead of to the main disk. The UUID is copied from the image
to the MBR as well. This prevents the mbr from being completely
overwritten and losing the partition table. The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image. Tests have been added to ensure
that the image partitions match up with the active partitions.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 48682
On systems that have an RTC prefer it to the file-based time fixup (i.e.
use hwclock when there is a permanent clock instead of the faked up time
logic that is needed when there is not RTC).
We can't rely on hctosys kernel feature either as we're usually using
RTC as kernel modules which are usually being loaded after hctosys was
run, leading in the following error:
hctosys: unable to open rtc device (rtc0)
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 48661
iptables is the only exception in the package tree, causing patch
behaviour to be inconsistent on this package.
Signed-off-by: Rick van der Zwet <rick.vanderzwet@anywi.com>
SVN-Revision: 48643
It's not really supported yet as it still fails with:
brcmfmac: brcmf_pcie_download_fw_nvram: FW failed to initialize
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48640
Recently TRX checking code was changed to detect Seama format and don't
abort whole writing operation because of it. This isn't a good long-term
solution. It's a poor idea to teach every format handler recognizing all
possible formats. Instead it should be handled in a generic code which
should run check depending on the detected format.
This will also allow further improvements like fixing formats other than
TRX after replacing JFFS2.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48639
Supported syntax is inspired by ethtool. Example usages:
swconfig dev switch0 port 2 set link "duplex half speed 100"
swconfig dev switch0 port 2 set link "autoneg on"
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48624
