Commit graph

27 commits

Author SHA1 Message Date
Florian Fainelli
f0a99c1692 add support for BT Voyager 2500 (#9070)
SVN-Revision: 26954
2011-05-20 10:06:07 +00:00
Florian Fainelli
9c8a2d5961 bcm63xx: Add support for the T-Home Speedport W 303V
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
Florian Fainelli
7d3b735854 bcm63xx: Update support for the DSL-274xB revision C
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26876
2011-05-11 13:33:50 +00:00
Florian Fainelli
0fb1c2d537 bcm63xx: Accept any led with power in its name as power led
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26875
2011-05-11 13:33:45 +00:00
Florian Fainelli
b7f8e1276d add support for 'MAGIC' bcm6348-based board
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.

I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )

Thanks to KanjiMonster for the support on the IRC channel.

Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>

SVN-Revision: 25584
2011-02-19 12:44:27 +00:00
Florian Fainelli
2d3ed6dc2d fix T-Com Speedport W 500V default config
The device is called SPW500V, not SP500W.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25431
2011-02-09 13:09:02 +00:00
Daniel Dickinson
6ee5411686 base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it.
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24836
2010-12-26 04:18:04 +00:00
Daniel Dickinson
44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
SVN-Revision: 24442
2010-12-10 18:59:58 +00:00
Daniel Dickinson
8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
SVN-Revision: 24305
2010-12-07 15:15:54 +00:00
Daniel Dickinson
e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
SVN-Revision: 24302
2010-12-07 15:15:41 +00:00
Daniel Dickinson
ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
SVN-Revision: 24276
2010-12-06 06:46:03 +00:00
Daniel Dickinson
7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch)
SVN-Revision: 24273
2010-12-06 02:01:08 +00:00
Daniel Dickinson
314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V.
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24190
2010-11-28 22:04:44 +00:00
Daniel Dickinson
c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2.
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
2010-11-28 22:04:36 +00:00
Daniel Dickinson
8fa9b24a4c bcm63xx: Allow 'colored' power leds.
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24187
2010-11-28 22:04:30 +00:00
Daniel Dickinson
fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit.
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
2010-11-28 22:04:26 +00:00
Daniel Dickinson
b1b318750a bcm63xx: Add defconfigs.
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24185
2010-11-28 22:04:19 +00:00
Daniel Dickinson
a5fdf57a1b base-files: diag.sh: For power button as preinit status led, end with led left on, not off
SVN-Revision: 22466
2010-08-02 19:33:08 +00:00
Daniel Dickinson
d391ca2c8c base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit
SVN-Revision: 22465
2010-08-02 19:32:59 +00:00
Daniel Dickinson
40c53c6556 brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21629
2010-05-30 01:33:20 +00:00
Daniel Dickinson
82edb6eafa brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21628
2010-05-30 01:33:09 +00:00
Daniel Dickinson
cc8fba8441 brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00)
SVN-Revision: 21627
2010-05-30 01:32:58 +00:00
Daniel Dickinson
bd8cfa63f4 brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21626
2010-05-30 01:32:47 +00:00
Florian Fainelli
a0a85ba7c6 we are using the default-on trigger for power LEDs, no need to change their state from userspace
SVN-Revision: 16892
2009-07-18 09:27:33 +00:00
Florian Fainelli
ecad504c39 register GPIO-connected LEDs for known boards
SVN-Revision: 16887
2009-07-18 00:40:23 +00:00
Florian Fainelli
0d7f5f8d2c add support for sysupgrade (#5117)
SVN-Revision: 15900
2009-05-17 16:53:57 +00:00
Florian Fainelli
4fc7535fc7 Make 4-port LAN and 1 port wan configurations work
SVN-Revision: 13362
2008-11-26 15:51:55 +00:00