KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
19637 commits 1 branch 0 tags 154 MiB
Commit graph

7811 commits

Author SHA1 Message Date
Gabor Juhos
f8a56dc8df ramips: raeth: separate ring allocation and setup 
SVN-Revision: 30573
 2012-02-16 08:17:50 +00:00
Gabor Juhos
d186c17aa6 generic: add SND_PPC symbol 
SVN-Revision: 30572
 2012-02-16 07:51:44 +00:00
Daniel Dickinson
1bb8a7613e Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default 
SVN-Revision: 30571
 2012-02-16 07:45:28 +00:00
Daniel Dickinson
b797f72319 d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600 
SVN-Revision: 30570
 2012-02-16 07:38:33 +00:00
Daniel Dickinson
c736e2d4b0 Fix partitions for Cameo-based boards; kernel 3.2 is bigger 
SVN-Revision: 30569
 2012-02-16 07:29:26 +00:00
Daniel Dickinson
4685a51301 image: For Cameo-based board fix adding mtd layout to kernel commandline) 
SVN-Revision: 30568
 2012-02-16 07:24:45 +00:00
Jo-Philipp Wich
8dc1ff6cb1 linux 3.2: missing generic symbols 
These symbols are dependent on CONFIG_PCI being enabled.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30565
 2012-02-15 23:37:47 +00:00
Gabor Juhos
49fc54be3d ramips: rt288x: fix PCI resource conflict 
SVN-Revision: 30563
 2012-02-15 21:19:02 +00:00
Florian Fainelli
37f8c19028 correct PCI IO/Mem resource swapping 
SVN-Revision: 30562
 2012-02-15 21:13:21 +00:00
Florian Fainelli
3ceebbba14 add Ralink V11ST-FE board support 
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

SVN-Revision: 30561
 2012-02-15 21:13:11 +00:00
Gabor Juhos
8b8d9a8336 ramips: raeth: add a helper function for skb allocation 
SVN-Revision: 30555
 2012-02-15 18:33:42 +00:00
Gabor Juhos
e57546de83 ramips: raeth: use netdev_alloc_skb 
SVN-Revision: 30554
 2012-02-15 18:33:41 +00:00
Gabor Juhos
064855314b ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures 
This helps GCC to generare more efficient code.

SVN-Revision: 30553
 2012-02-15 18:33:40 +00:00
Gabor Juhos
8c95385d78 ramips: raeth: use 're' instead of 'priv' everywhere 
SVN-Revision: 30552
 2012-02-15 18:33:38 +00:00
Gabor Juhos
b3b79365f3 ramips: raeth: force link down in ramips_phy_stop 
SVN-Revision: 30550
 2012-02-15 13:47:52 +00:00
Gabor Juhos
3e7b461431 ramips: raeth: serialize ramips_link_adjust calls 
SVN-Revision: 30549
 2012-02-15 13:47:50 +00:00
Gabor Juhos
dcb13d4098 ramips: raeth: add PHYLIB support 
SVN-Revision: 30547
 2012-02-15 06:47:12 +00:00
John Crispin
23b2bd9494 linux-atm: update solos-pci driver to upstream 
Fixes for the solos-pci driver.

- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 30541
 2012-02-14 20:11:24 +00:00
John Crispin
9e5b8ad833 linux-atm: headroom/padding fixes 
Submitted upstream to netdev by Chas Williams on linux-atm.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 30540
 2012-02-14 20:11:22 +00:00
John Crispin
1a71f07d00 generate uboot environment data in target 
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
 2012-02-14 19:07:11 +00:00
John Crispin
7416a5f0aa fix compile error in previous commit 
SVN-Revision: 30534
 2012-02-14 19:07:05 +00:00
John Crispin
cd1a204365 Support booting the Speedport W502V using BRN-BOOT. 
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
 2012-02-14 17:48:04 +00:00
Gabor Juhos
02a01a16c7 ramips: extract eeprom for the PCIe wlan module on the RT-N56U 
SVN-Revision: 30529
 2012-02-14 17:32:45 +00:00
Gabor Juhos
43d1a2c3ab ramips: rt3883: enable PCI on the RT-N56U board 
SVN-Revision: 30528
 2012-02-14 17:32:44 +00:00
Gabor Juhos
784be92e39 ramips: rt3883: add PCI support 
SVN-Revision: 30527
 2012-02-14 17:32:42 +00:00
Gabor Juhos
10f00dc48b ramips: rt3883: sync 2.6.39 config 
SVN-Revision: 30526
 2012-02-14 17:32:41 +00:00
Gabor Juhos
ed79921fe5 ramips: use SoC specific irq.h 
SVN-Revision: 30525
 2012-02-14 17:32:40 +00:00
John Crispin
0b07769898 fixes irq locking in ethernet driver 
SVN-Revision: 30522
 2012-02-14 15:05:58 +00:00
John Crispin
55bf39e98c fixes gpio_export patch 
SVN-Revision: 30521
 2012-02-14 15:05:57 +00:00
John Crispin
976d3eb854 add annex selection support to ltq_dsl package 
SVN-Revision: 30518
 2012-02-14 15:05:49 +00:00
Gabor Juhos
9a0e17857e ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards 
SVN-Revision: 30508
 2012-02-13 17:11:58 +00:00
Gabor Juhos
1c57a22aae ar71xx: add model detection for TL-WR842N/ND 
SVN-Revision: 30507
 2012-02-13 17:11:57 +00:00
Florian Fainelli
e16916480d update to 3.2 
SVN-Revision: 30503
 2012-02-13 16:05:30 +00:00
Florian Fainelli
7bed2e2225 fix titan gpio register size 
SVN-Revision: 30502
 2012-02-13 16:05:27 +00:00
Gabor Juhos
8d5dfa75e6 ramips: rt3883: update package list in the default profile 
SVN-Revision: 30499
 2012-02-13 15:18:05 +00:00
Gabor Juhos
99c019fb0d ramips: add preliminary support for the Asus RT-N56U board 
SVN-Revision: 30498
 2012-02-13 15:18:04 +00:00
Gabor Juhos
97e641a0e6 ramips: raeth: enable MDIO code for RT3883 
SVN-Revision: 30497
 2012-02-13 15:18:03 +00:00
Gabor Juhos
e532fa5fd4 ramips: add preliminary support for the RT3662/RT3883 SoCs 
SVN-Revision: 30495
 2012-02-13 15:17:59 +00:00
Florian Fainelli
4a0dc3a32a add support for 3.2 
SVN-Revision: 30492
 2012-02-13 12:36:34 +00:00
Hauke Mehrtens
30408f1cc4 brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. 
SVN-Revision: 30488
 2012-02-12 22:41:20 +00:00
Hauke Mehrtens
e7bd7f7e85 brcm47xx: activate config bug to show warnings 
SVN-Revision: 30487
 2012-02-12 22:40:01 +00:00
Gabor Juhos
22ec8b4839 ramips: use GENERIC_{4,8}M image template for WR5123GN 
SVN-Revision: 30483
 2012-02-12 18:04:47 +00:00
Gabor Juhos
b7f129e19b ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline 
SVN-Revision: 30482
 2012-02-12 18:04:46 +00:00
Hauke Mehrtens
fa21aef5ab brcm47xx: refresh patches 
SVN-Revision: 30481
 2012-02-12 16:45:27 +00:00
Hauke Mehrtens
838c363886 brcm47xx: update usb driver for brcm47xx. 
SVN-Revision: 30480
 2012-02-12 16:38:10 +00:00
Gabor Juhos
a287c60a61 ramips: add initial support for 3.2 
SVN-Revision: 30476
 2012-02-12 12:52:14 +00:00
Gabor Juhos
388013b0ce ramips: include 'linux/module.h' in the ramips_spi driver 
SVN-Revision: 30475
 2012-02-12 12:52:13 +00:00
Gabor Juhos
faae4235c4 ramips: rt288x: remove per-board physmap_flash_data instances 
SVN-Revision: 30474
 2012-02-12 12:52:12 +00:00
Gabor Juhos
3502e2b93f ramips: rt305x: remove per-board physmap_flash_data instances 
SVN-Revision: 30473
 2012-02-12 12:52:10 +00:00
Imre Kaloz
143e861708 enable another l2 cache errate on newer kernels 
SVN-Revision: 30472
 2012-02-12 11:22:08 +00:00