Commit graph

243 commits

Author SHA1 Message Date
Koen Vandeputte
f7036a34ac kernel: bump 4.9 to 4.9.118
Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-07 12:53:47 +02:00
Koen Vandeputte
fec8fe8069 kernel: bump 4.9 to 4.9.116
Refreshed all patches

Remove upstreamed patches.
- 103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch
- 001-4.11-01-mtd-m25p80-consider-max-message-size-in-m25p80_read.patch
- 001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
- 001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
- 900-gen_stats-fix-netlink-stats-padding.patch

Introduce a new backported patch to address ext4 breakage, introduced in 4.9.112
- backport-4.9/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch

This patch has been slightly altered to compensate for a new helper function
introduced in later kernels.

Also add ARM64_SSBD symbol to ARM64 targets still running kernel 4.9

Compile-tested on: ar71xx, bcm2710
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-01 09:46:59 +02:00
Stijn Tintel
77e3e706ce kernel: add missing ARM64_SSBD symbol
In 4.14.57, a new symbol for Spectre v4 mitigation was introduced for
ARM64. Add this symbol to all ARM64 targets using kernel 4.14.

This mitigates CVE-2018-3639 on ARM64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-07-31 12:22:11 +03:00
Daniel Engberg
3accbc6aac sunxi: Enable SD block devices
USB storage support is however SCSI Disk block device support isn't
meaning that connected devices wont enumerate.
Enable CONFIG_BLK_DEV_SD by default to fix it.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-07 18:19:39 +02:00
Koen Vandeputte
8c1f088521 kernel: bump 4.9 to 4.9.108
Refreshed all patches

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-06-18 07:10:19 +02:00
Kevin Darbyshire-Bryant
f60301db74 kernel: bump 4.9 to 4.9.107
Refresh patches.

Compile-tested for: ar71xx
Run-tested on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-06-09 22:39:17 +02:00
Koen Vandeputte
2792ef55ab kernel: bump 4.9 to 4.9.106
Refreshed all patches

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-06-07 09:04:46 +02:00
Kevin Darbyshire-Bryant
7dca1bae82 kernel: bump to 4.9.105
Refresh patches.

Drop patches that have been upstreamed:
target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
target/linux/generic/backport-4.9/095-v4.12-ipv6-Need-to-export-ipv6_push_frag_opts-for-tunnelin.patch
target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch
target/linux/generic/pending-4.9/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch
target/linux/generic/pending-4.9/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch

Compile & run tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-06-01 08:25:14 +02:00
Sergey Ryazanov
67a3cdcbb0 kernel: enable THIN_ARCHIVES by default
THIN_ARCHIVES option is enabled by default in the kernel configuration
and no one target config disables it. So enable it by default and remove
this symbol from target specific configs to keep them light.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:20 +02:00
Sergey Ryazanov
bdc2b58c4b kernel: enable FUTEX_PI by default
New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols
are enabled. Both of these symbols are enabled by default in the
generic config, so enable FUTEX_PI by default too to keep platform
specific configs minimal.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:12 +02:00
Sergey Ryazanov
a08b0d0c31 kernel: enable EXPORTFS by default
OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have
OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config
of 4.14 and remove this option from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:05 +02:00
Sergey Ryazanov
978543a246 kernel: disable DRM_LIB_RANDOM by default
DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST
which is disable by default, so disable DRM_LIB_RANDOM by default too.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:57 +02:00
Sergey Ryazanov
ead26e9db6 kernel: disable DMA_{NOOP|VIRT}_OPS by default
These options do not used by any supported arch, so disable them by
default to make arch configs a bit more clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:49 +02:00
Sergey Ryazanov
f928c338ad kernel: disable ARCH_WANTS_THP_SWAP by default
Only one arch (x86_64) enables this option. So disable
ARCH_WANTS_THP_SWAP by default and remove referencies to it from all
configs (except x86_64) to make them clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:42 +02:00
Koen Vandeputte
12f44b83a8 kernel: bump 4.9 to 4.9.100
Refreshed all patches

Added new ARM64 symbol: ARM64_ERRATUM_1024718

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-05-18 09:10:21 +02:00
Mathias Kresin
3877550114 arm64: enable harden branch predictor
Enable the harden branch predictor for arm64 as it is recommend.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-04-27 21:34:18 +02:00
Kevin Darbyshire-Bryant
9aa196e0f2 kernel: bump 4.9 to 4.9.96
Refresh patches, following required reworking:

ar71xx/patches-4.9/930-chipidea-pullup.patch
layerscape/patches-4.9/302-dts-support-layercape.patch
sunxi/patches-4.9/0052-stmmac-form-4-12.patch

Fixes for CVEs:
CVE-2018-1108
CVE-2018-1092

Tested on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Arjen de Korte <build+openwrt@de-korte.org>
2018-04-26 08:53:54 +02:00
Fan Fan
8e1065d681 sunxi: add build for sopine
This will generate image for Pine64 Sopine board.

Signed-off-by: Fan Fan <fkpwolf@gmail.com>
2018-03-23 23:53:20 +01:00
Hauke Mehrtens
14006efcf3 sunxi: update Xunlong Orange Pi Zero Plus dts file
This updates the DTS file to the version send upstream

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-17 22:15:38 +01:00
Hauke Mehrtens
b7b14fd64e sunxi: Fix B53 swconfig driver for Lamobo R1
This reverts the changes needed for the upstream b53 DSA switch driver
to use the OpenWrt b43 swconfig switch driver instead.

Tested-by: TheWerthFam <thewerthfam@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-10 01:15:22 +01:00
Antony Antony
d6634edfc1 sunxi: NanoPi NEO Plus2 backport Gigabit Ethernet DT node
Kernel 4.16 commit 27d7f9297027

Signed-off-by: Antony Antony <antony@phenome.org>
2018-03-10 01:15:22 +01:00
Magnus Kroken
5af85dab22 kernel: bump 4.9 to 4.9.85
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2018-03-03 12:58:55 +01:00
Vitalij Alshevsky
70130268a8 sunxi: Add support for Xunlong Orange Pi PC
CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.3 Ghz
GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0)
Memory: 1GB DDR3 (shared with GPU)
Onboard: Storage TF card (Max. 64GB) / MMC card slot
Onboard: Network 10/100M Ethernet RJ45
Onboard header pinout: SPI, I2C, 1-WIRE
USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG
Buttons: Power Button(SW4)
Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI..

Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
2018-02-26 11:24:04 +01:00
Hauke Mehrtens
6be73c07db sunxi: Add Xunlong Orange Pi Zero Plus
This is based on a patch from armbian:
https://github.com/armbian/build/blob/master/patch/kernel/sunxi-next/sunxi-add-orangepi-zero-plus.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-17 01:15:25 +01:00
Hauke Mehrtens
ef73ebbfe2 sunxi: Add Realtek PHY driver or ARM64 devices
The Orange Pi Zero Plus uses a RTL8211E, add the driver for this PHY.
This is probably used on more boards with a Allwinner SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-17 01:15:24 +01:00
Antony Antony
3c24a1d423 sunxi: add support for NanoPi NEO Plus2 board
arm64: allwinner: h5: NanoPi NEO Plus2 DT support
Add initial DT for NanoPi NEO Plus2 by FriendlyARM
    - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU
    - 1 GB DDR3 RAM
    - 8GB eMMC flash (Samsung KLM8G1WEPD-B031)
    - micro SD card slot
    - Gigabit Ethernet (external RTL8211E-VB-CG chip)
    - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module)
    - 2x USB 2.0 host ports & 2x USB via headers

Signed-off-by: Antony Antony <antony@phenome.org>
2018-02-17 01:15:24 +01:00
Antony Antony
b7a1aa4df2 sunxi: add kernel DT for NanoPi NEO Plus2 board
Linux Kernel upstream commit d73413058

Signed-off-by: Antony Antony <antony@phenome.org>
2018-02-17 01:15:24 +01:00
Zoltan HERPAI
eae6003174 sunxi: switch to kernel 4.14
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-16 12:20:39 +01:00
Hauke Mehrtens
b33c3e1b7c sunxi: Orange Pi R1: configure USB Ethernet controller.
Now the USB port is the WAN port.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:59:38 +01:00
Hauke Mehrtens
40db7a9dec sunxi: Orange Pi R1: Fix USB Ethernet and activate SPI
The USB Ethernet is not working with the patches proposed for upstream,
fix this and activate the SPI node as this board always has a SPI flash.

Both patches are also targeted for upstream kernel 4.16 and 4.17.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:59:38 +01:00
Hauke Mehrtens
75f7c1c9ac sunxi: use upstream patch for Orange Pi R1
Instead of using our own device tree definitions use the one provided in
the upstream kernel for 4.16.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:54:17 +01:00
Hauke Mehrtens
b1c82cbd51 sunxi: backport stmmac network patches
Ethernet support was initial added in kernel 4.13, but deactivated
before the final release. This is backports the changes which are
activating it again from kernel 4.15.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:54:17 +01:00
Hauke Mehrtens
ad2b3bf310 sunxi: Add support for kernel 4.14
This is based on the code for kernel 4.9, but a lot of 4.9 patches are
backports from more recent kernel version and can be removed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:51:02 +01:00
Hauke Mehrtens
dda475ca30 sunxi: refresh kernel configuration
Just refresh the sunxi kernel configuration.
This also moves the CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG option to the
config-4.9 file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:49:59 +01:00
Kevin Darbyshire-Bryant
d8565a06dc kernel: bump 4.9 to 4.9.77
Refresh patches.
Remove upstreamed patches:

target/linux/generic/backport-4.9/023-2-smsc75xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch
target/linux/generic/backport-4.9/023-3-cx82310_eth-use-skb_cow_head-to-deal-with-cloned-skb.patch
target/linux/generic/backport-4.9/023-4-sr9700-use-skb_cow_head-to-deal-with-cloned-skbs.patch
target/linux/generic/backport-4.9/023-5-lan78xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch

CVEs completely or partially addressed:

CVE-2017-5715
CVE-2017-5753
CVE-2017-17741
CVE-2017-1000410

Compile-tested: ar71xx Archer C7 v2
Run-tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-01-20 20:22:01 +01:00
Jo-Philipp Wich
7e99a6ba69 target: disable CONFIG_PROC_PAGE_MONITOR on most targets
Disable CONFIG_PROC_PAGE_MONITOR in most places and only keep it enabled
for virtual targets such as malta or potent ones like x86.

This saves up to 4KB of uncompressed kernel size and significantly
decreases CPU load under certain workloads.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-13 15:04:15 +01:00
Jo-Philipp Wich
f66fe0080a sunxi: enable missing config symbol
Enable CONFIG_MFD_AXP20X_I2C after the switch to Kernel 4.9, this symbol
is reportedly required to get USB working on the Banana Pi.

Ref: https://forum.lede-project.org/t/sunxi-kernel-4-9-usb-not-working/10513
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-11 03:14:07 +01:00
Stijn Tintel
8b35da1552 kernel: move CONFIG_KASAN to generic config
While bumping 4.14, the kernel build failed due to missing CONFIG_KASAN
symbol. Move it to generic config instead of defining it for all arm64
and x86/64 targets.

It was only added in 4.0, so not needed in config-3.18.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-01-02 21:55:46 +02:00
Hauke Mehrtens
f704b643b9 kernel: Update kernel 4.9 to 4.9.70
Runtime tested on lantiq.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-19 22:45:27 +01:00
Stijn Tintel
9fe59abef8 kernel: bump 4.9 to 4.9.65
Refresh patches.
Compile-tested: ar71xx, octeon, x86/64.
Runtime-tested: ar71xx, octeon, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-11-24 14:09:11 +02:00
Hauke Mehrtens
b5d52b2052 sunxi: remove support for kernel 4.4
Kernel 4.9 is working good on this target, remove support for kernel 4.4
now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-23 19:17:11 +01:00
Hauke Mehrtens
c048ca0ce0 sunxi: backport sunxi-mmc controller driver from 4.13
There are multiple problems on the A64 SoC with the older drivers which
are fixed in the upstream kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-23 19:16:42 +01:00
Koen Vandeputte
62ede4f783 kernel: bump 4.9 to 4.9.63
Refreshed all patches.

Removed upstreamed parts.

Compile-tested: cns3xxx, imx6, mvebu, layerscape
Run-tested: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-11-22 20:45:52 +01:00
Luis Araneda
b31c1237c7 sunxi: add support for NanoPi M1 Plus board
Backported devicetree from Kernel 4.13 with some additions
to enable Ethernet and WiFi module

The following features are working:
- Ethernet
- WiFi
- eMMC and microSD slot
- USB ports

The following features are not working:
* Bluetooth

NanoPi M1 Plus key features
- SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz
- RAM: 1GB DDR3
- eMMC: 8GB
- microSD slot
- Ethernet 10/100/1000M
- Wifi: AP6212

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:30 +01:00
Luis Araneda
ef1483b8fe sunxi: base files: add AP6212 (brcm43430) NVRAM
Used by the NanoPi M1 Plus board

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:14 +01:00
Zoltan HERPAI
f9ecb0d562 sunxi: add Orange Pi 2 support
- H3 @ 1.3 GHz
- 1GiB DDR3
- 10/100Mbps Ethernet
- Realtek RTL8189ETV wifi
- 4 USB 2.0

Difference to the "Orange Pi Plus" is the lack of Gbit ethernet
and lack of onboard flash.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Kayo Phoenix
6a3565985f sunxi: Added profile for HAOYU Electronics Marsboard A10
The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC.
http://linux-sunxi.org/MarsBoard_A10

Signed-off-by: Kayo Phoenix <kayo@illumium.org>
[Forward-ported to new target layout:]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Stijn Tintel
834810617e kernel: bump 4.9 to 4.9.58
Refresh patches.
Compile-tested: ar71xx, octeon, x86/64.
Runtime-tested: octeon, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-23 17:23:34 +03:00
Kevin Darbyshire-Bryant
886d66abcd kernel: bump 4.9 to 4.9.57
Refresh patches.
Compile-tested for ar71xx - Archer C7 v2
Runtime-tested on  ar71xx - Archer C7 v2

Fixes the following CVEs:

- CVE-2017-7518
- CVE-2017-0786
- CVE-2017-1000255
- CVE-2017-12188
- CVE-2017-15265

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-10-18 19:44:09 +03:00
Lucian Cristian
b4fefe7b6e sunxi: backport support for Allwinner Security System PRNG
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-10-15 00:24:21 +02:00