Commit graph

11 commits

Author SHA1 Message Date
Felix Fietkau
49d4a980d7 ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47544
2015-11-21 10:54:58 +00:00
Felix Fietkau
575413a779 ipq806x: fix pcie tx0-term-offset setting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47543
2015-11-21 10:54:53 +00:00
Felix Fietkau
44b8472f16 ipq806x: fix device tree nodes for PCI to get rid of I/O and memory offsets
Fixes QCA99x0 detection issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47542
2015-11-21 10:54:48 +00:00
John Crispin
b0b59a8e75 ipq806x: switch AP148 to using SMEM based MTD parser
*Enable SMEM MTD parser and its dependencies (SMEM & HW spinlocks) in
 the kernel config
*Replaces the MTD layout in DT by the dynamic layout provided by the
 SMEM parser for AP148

Using the OF based parser is still possible on platforms which have a
fixed MTD partition layout.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46658
2015-08-17 06:18:15 +00:00
John Crispin
6b775f4517 ipq806x: add hwspinlock support
This change cherry-picks the following 3 changes from linux-next:
*fb7737 hwspinlock/core: add device tree support
*19a0f6 hwspinlock: qcom: Add support for Qualcomm HW Mutex block
*bd5717 hwspinlock: qcom: Correct msb in regmap_field

We're also adding a patch to add the hardware spinlock device nodes on
IPQ806x platforms (033-soc-qcom-Add-sfbp-device-to-IPQ806x-dts.patch).

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46655
2015-08-17 06:17:47 +00:00
Felix Fietkau
0f7de49fa3 ipq806x: fix freeze in PCIe code when booting with an old u-boot
Old bootloader (same ones which have DT disabled) don't perform any PCIe
initialization. The consequence is a freeze during PCIe bring-up on
these old u-boot. Same kernel with a newer bootloaders works fine as
they contain the corresponding PCIe init code.

In this change, we'll add the missing init and make sure the kernel
doesn't rely on some preexisting init to get PCIe to work. That includes
the following changes:
*GPIOs: set function & drive strength
*Clocks: add init code for aux & ref clocks
*PCIe driver: additional init of the hardware controller

Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46557
2015-08-04 23:10:03 +00:00
Felix Fietkau
f7651fdba5 ipq806x: fix pcie pinmux naming in ipq806x dts
PCIe controller nodes are numbers 0/1/2 in the chipset dtsi file, but
the pinmux nodes are numbers 1/2/3. We'll make it consistent by changing
the pinmux numbering to match the controller's one.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46556
2015-08-04 23:09:55 +00:00
John Crispin
d2a2eb7e48 ipq806x: replace caf nss-gmac driver by upstream stmmac
This driver has been cherry-picked and backported from the following
LKML thread:
*https://lkml.org/lkml/2015/5/26/744

It also updates the DT accordingly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45831
2015-05-29 12:26:01 +00:00
John Crispin
30bbe0b388 ipq806x: move arm-gic include into pcie patch
This include is necessary starting at the PCIe patch, which has a lower
number. So in order to keep the patches consistent, we'll move the
arm-gic include in the first patch who needs it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45827
2015-05-29 12:25:15 +00:00
John Crispin
f74477de48 ipq806x: disable i2c device on gsbi4
Patch cherry-picked from the following location:
https://chromium-review.googlesource.com/#/c/269931/

Disable the i2c device on gsbi4 and mark gsbi4_h and gsbi4_qup clks as
unused. If they are enabled, clock framework will turn them off at end
of probe. On ipq806x by design gsbi4_qup, gsbi4_h clks and i2c on gsbi4
are meant for RPM usage. So turning them off in kernel is incorrect.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45728
2015-05-23 15:27:45 +00:00
Felix Fietkau
cfb56b4811 ipq806x: add pcie support to ipq806x based platforms
This change adds PCIe support to IPQ806x based platforms. The driver is
actually cherry-picked from the following LKML thread:
*https://lwn.net/Articles/643086/ (patches 110-111)

We also add here an additional fix to support multiple PCI controllers
on the same platform (patch 112), and to patch the ap148 & dbs149 DTS
files (patch 113).

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45663
2015-05-10 11:47:09 +00:00