KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
26382 commits 1 branch 0 tags 154 MiB
Commit graph

11346 commits

Author SHA1 Message Date
Gabor Juhos
f1a9ed8345 ar71xx: image: move WNDAP360 macro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39394
 2014-01-25 08:31:45 +00:00
Gabor Juhos
715c7533b9 kernel/3.8: update pci_disable_usb_common_quirks patch 
Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39393
 2014-01-25 08:25:05 +00:00
Gabor Juhos
f85231257e ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards 
On recent TL-WDR4300 boards the external LNAs of the 2.4GHz
interface are connected to GPIO lines. Because these GPIO
lines are disabled by default, the RX sensitivity of the
device is quite bad.

Setup the GPIOs of the external LNAs to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39392
 2014-01-24 17:40:17 +00:00
Gabor Juhos
09bf46d418 ar71xx: image: generate sysupgrade images for the Compex boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39391
 2014-01-24 17:15:03 +00:00
Gabor Juhos
252e906dda ar71xx: add sysupgrade support for the Compex boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39390
 2014-01-24 17:15:02 +00:00
Gabor Juhos
0c0b87293e ar71xx: image: use a single firmware partition on Compex devices 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39389
 2014-01-24 17:15:01 +00:00
Gabor Juhos
2995030b47 ar71xx: enable MTD_SPLIT_LZMA_FW option 
It will be used for Compex devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39388
 2014-01-24 17:15:01 +00:00
Gabor Juhos
89d60314e7 kernel/3.1x: add split code for LZMA compressed kernel based firmwares 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39387
 2014-01-24 17:14:59 +00:00
Gabor Juhos
998c89a9a6 ar71xx: image: detect partition sizes in the Image/Build/Ath macro 
Get the size of the mtd partitions directly from the
MTD layout and remove the superfluous macro parameters.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39384
 2014-01-24 11:59:35 +00:00
Gabor Juhos
4556632578 ar71xx: image: fix size verification in the CatFiles macro 
The macro checks the size of the rootfs image even if
the second parameter of the macro contains the size of
an eraseblock. It is wrong because the size of the
kernel image will be adjusted to the next eraseblock
and the resulting image might be too large.

Fix the macro to check the size of the final image
instead of the rootfs image.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39383
 2014-01-24 11:59:32 +00:00
Gabor Juhos
e89476e0a8 Revert "kernel: create firmware partition from MyLoader partition parser" 
This reverts r38197.

The automatically created firmware partition includes
the partition_table partition. Apart from the partition
table, this partition contains sensitive data on some
Compex devices which data can be destroyed when the
firmware partition gets modified. Revert the change to
prevent that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39382
 2014-01-24 08:48:10 +00:00
Gabor Juhos
56136c0f34 ar71xx: ap83: define mtd layout via command line 
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39379
 2014-01-23 16:47:42 +00:00
Gabor Juhos
a59e82761f ar71xx: ap81: define mtd layout via command line 
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39378
 2014-01-23 16:47:41 +00:00
Gabor Juhos
9f4e2bf326 ar71xx: image: show size limit in warning messages 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39376
 2014-01-23 12:27:28 +00:00
Gabor Juhos
447530995a ar71xx: add initramfs image support for Compex devices 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39375
 2014-01-23 12:23:10 +00:00
Gabor Juhos
b629009eaa ar71xx: wp543: use KEY_RESET code for the sw4 button 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39374
 2014-01-23 12:23:08 +00:00
Luka Perkov
cbc892a549 ar71xx: create wndr3700 network config from uci-defaults 
Since that was the last configuration in defconfig directory we can drop the
defconfig init script too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39373
 2014-01-23 11:33:42 +00:00
Gabor Juhos
bbe086873a kernel/3.10: update pci_disable_usb_common_quirks patch 
Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39369
 2014-01-23 09:07:49 +00:00
Gabor Juhos
53512a1961 mpc85xx: Fix building ramdisk images 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39368
 2014-01-23 06:55:58 +00:00
Gabor Juhos
30af45d19a mpc85xx: Remove inittab workaround 
The default inittab uses "askconsole" which is implemented by procd
and uses the console provided by the kernel command line.

Hence, this platform specific workaround is not necessary anymore.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39367
 2014-01-23 06:55:50 +00:00
Florian Fainelli
a747611fe3 brcm63xx: enable support for BCM63268 
Support for the BCM63268 is usable, enable it by default.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39364
 2014-01-21 18:50:26 +00:00
Florian Fainelli
eaa3e9ec6e brcm63xx: add support for BCM963269BHR board 
Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39363
 2014-01-21 18:50:11 +00:00
Florian Fainelli
fed4b02a68 brcm63xx: improve BCM63268 support 
Allow using the HSSPI controller since it works just fine, as well as
the integrated switch core, since that one works too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39362
 2014-01-21 18:49:50 +00:00
Gabor Juhos
0b599c51cc ar71xx: mynet-n750: define LEDs connected to the AR8327 switch 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4743/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39361
 2014-01-21 17:17:42 +00:00
Zoltan Herpai
f3c07b8621 modules: swconfig.c: update the error path on 3.13, and behave nicely with return 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39360
 2014-01-21 14:43:50 +00:00
Zoltan Herpai
4d26250db1 modules: update swconfig.c to compile on 3.13 (compile-tested) 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39359
 2014-01-21 14:24:45 +00:00
Zoltan Herpai
a7a890d9e8 add missing symbols 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39358
 2014-01-21 14:23:00 +00:00
Jonas Gorski
d5b4292032 kernel: ocf: add missing dependency for hifn driver 
The HIFN driver is a PCI driver, thus requires PCI support to be enabled
to compile. Therefore let it depend on PCI..

Should fix mvebu builds.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39357
 2014-01-21 12:11:18 +00:00
Zoltan Herpai
7ee639a81c add missing symbols 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39355
 2014-01-21 07:53:11 +00:00
Hauke Mehrtens
1f4e6394ed b53: use drvdata to store driver data 
we should not abuse the platform_data pointer.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39354
 2014-01-20 20:01:22 +00:00
Hauke Mehrtens
de266cd1c1 b53: make b53_switch_reset_gpio() static 
SVN-Revision: 39353
 2014-01-20 19:07:18 +00:00
Zoltan Herpai
2cf8391b75 update ocf patches - as ENT_DEBUG is removed, move the messages into pr_notice 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39350
 2014-01-20 15:23:27 +00:00
Imre Kaloz
c89e789913 update/fixup overlayfs patch 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39349
 2014-01-20 14:46:29 +00:00
Imre Kaloz
6bd1a37001 add initial 3.13 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39348
 2014-01-20 13:56:24 +00:00
Gabor Juhos
506b40b628 ar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39346
 2014-01-20 10:23:06 +00:00
Gabor Juhos
c17cfab560 ar71xx: tl-wdr4300: define LEDs connected to the AR8327 switch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39345
 2014-01-20 10:23:05 +00:00
Gabor Juhos
db5f22a2d7 ar71xx: set default LED config for the RB2011* boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39344
 2014-01-20 10:23:04 +00:00
Gabor Juhos
927809e59b ar71xx: set status_led for the RB2011* boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39343
 2014-01-20 10:23:03 +00:00
Gabor Juhos
07f76a164a ar71xx: fix indentation in diag.sh 
Replace the leading spaces with tabs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39342
 2014-01-20 10:23:02 +00:00
Gabor Juhos
4c54635106 ar71xx: rb2011: define LEDs connected to the AR8327 switch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39341
 2014-01-20 10:23:01 +00:00
Gabor Juhos
31d6ad289f ar71xx: enable AR8327 LED support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39340
 2014-01-20 10:23:00 +00:00
Gabor Juhos
2d28a07df7 kernel/3.1[02]: add AR8216_PHY_LEDS option 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39339
 2014-01-20 10:22:59 +00:00
Gabor Juhos
0056ac55af generic: ar8216: add custom LED support for the AR8327 switch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39338
 2014-01-20 10:22:56 +00:00
Gabor Juhos
15d41de1eb generic: ar8216: allow to use chip specific cleanup callback 
It will be used for AR8327.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39337
 2014-01-20 10:22:55 +00:00
Gabor Juhos
c7652f1f9e generic: ar8216: add optimized rmw operation 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39336
 2014-01-20 10:22:54 +00:00
Gabor Juhos
b4dc45e07d ar71xx: rb2011: fix eth5 LED 
The eth5 LED on the RB2011 is not working because the
LED control rule is missing. Fix it.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39335
 2014-01-20 10:22:49 +00:00
John Crispin
ebaa3817a7 ralink: activate xhci config 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39330
 2014-01-19 17:27:31 +00:00
John Crispin
a818a3cf8f ralink: backport various fixes from linux-mti 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39329
 2014-01-19 17:27:22 +00:00
John Crispin
a75b692557 ralink: add xhci driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39328
 2014-01-19 17:27:13 +00:00
Jonas Gorski
d513c07d2f brcm63xx: fix typo breaking build in r39325 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39326
 2014-01-19 14:00:18 +00:00