Commit graph

554 commits

Author SHA1 Message Date
Jonas Gorski
f16ea6be3f bcm63xx: fix entering failsafe through button
gpio_keys_polled needs to be loaded in preinit for buttons to work for
entering failsafe.

SVN-Revision: 33653
2012-10-08 09:59:44 +00:00
Florian Fainelli
caf900f0e4 remove kmod-spi-bitbang
This is no longer a dependency of kmod-spi-bcm63xx

SVN-Revision: 33562
2012-09-26 20:11:37 +00:00
Jonas Gorski
7708138183 bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi
Fixes booting the device with button hotplug enabled (#10785).

SVN-Revision: 33340
2012-09-09 11:54:56 +00:00
Florian Fainelli
f164b71189 leds: do not register device if no leds defined
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33158
2012-08-13 09:55:10 +00:00
Florian Fainelli
f0f10014a0 BCM6358 fix enet MII clk definitions
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33157
2012-08-13 09:55:07 +00:00
Florian Fainelli
9b91c62917 nb4: fix support, add support for SVC and CLIP BTN
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33156
2012-08-13 09:55:04 +00:00
Jonas Gorski
4feeda756e bcm63xx: fix USB base registers and IRQs for BCM6328
SVN-Revision: 33005
2012-08-05 23:18:22 +00:00
Jonas Gorski
07c4524d33 bcm63xx: Add nb6 support (BCM6362 SoC base boards)
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

SVN-Revision: 32924
2012-07-31 14:27:47 +00:00
Jonas Gorski
820c224029 bcm63xx: add basic bcm6362 support
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32923
2012-07-31 14:27:42 +00:00
Jonas Gorski
dcd339ac9d bcm63xx: enable usb for bcm6328
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32922
2012-07-31 14:27:34 +00:00
Jonas Gorski
94d257a851 bcm63xx: update enetswitch driver
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
2012-07-31 14:27:31 +00:00
Jonas Gorski
fa75bd977a bcm63xx: reorder patches
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
2012-07-31 14:27:25 +00:00
Florian Fainelli
a4d699ccf0 fix DVA-G3810BN image generation
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
2012-07-27 15:35:12 +00:00
Florian Fainelli
c6813d33f3 add D-link DVA-G3810BN-TL-1 support
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
2012-07-27 15:35:09 +00:00
Florian Fainelli
18206793b2 Add CT6376-1 board support
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
2012-07-27 15:35:05 +00:00
Florian Fainelli
4acdbb1d87 Add brcmsmac profile
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32890
2012-07-27 15:34:57 +00:00
Florian Fainelli
b94d9eb302 remove bcm63xx_pci_register() call in livebox board
SVN-Revision: 32661
2012-07-11 09:15:26 +00:00
Florian Fainelli
f8446c3d4c use physmap-flash on livebox (#8677)
SVN-Revision: 32660
2012-07-11 09:15:22 +00:00
Florian Fainelli
bb1488e5e7 Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32643
2012-07-06 22:10:37 +00:00
Jonas Gorski
0a3e9c3148 bcm63xx: bcm63xx-spi does not depend on spi-bitbang
SVN-Revision: 32594
2012-07-03 21:42:17 +00:00
Jonas Gorski
fad888a85c bcm63xx: 96348A-122 improvements (Comtrend 5365)
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32593
2012-07-03 21:42:15 +00:00
Jonas Gorski
0c7e676342 bcm63xx: fix second caldata address calculation
thanks Noltari for spotting this.

SVN-Revision: 32592
2012-07-03 21:42:12 +00:00
Jonas Gorski
988147111c bcm63xx: update patches to latest upstream versions
SVN-Revision: 32591
2012-07-03 21:42:07 +00:00
Florian Fainelli
4cdc4b1f36 refresh patches
SVN-Revision: 32581
2012-07-03 09:45:46 +00:00
Florian Fainelli
52bae2d2bd fix watchdog and rng drivers section mismatch (#11767)
SVN-Revision: 32522
2012-06-29 09:07:54 +00:00
Florian Fainelli
1d7878a38b fix SPI clock frequency selection
SVN-Revision: 32512
2012-06-27 22:14:50 +00:00
Florian Fainelli
b89c81929e fix SPI message control handling for BCM6338/6348
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

SVN-Revision: 32409
2012-06-17 16:17:29 +00:00
Jonas Gorski
f2271efc4e bcm63xx: readd accidentially dropped ignore_oc in ehci driver
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

SVN-Revision: 32221
2012-06-11 22:24:58 +00:00
Florian Fainelli
6e5242952c fix 553-board_96348w3.patch patch wrt gpio-keys-polled
SVN-Revision: 32096
2012-06-06 20:58:45 +00:00
Florian Fainelli
4c25e42fa8 fix alarm led color for board 96348A-122
SVN-Revision: 32089
2012-06-06 16:07:46 +00:00
Florian Fainelli
2f63f097de add 96348w3 board (#10764)
SVN-Revision: 32088
2012-06-06 15:45:04 +00:00
Florian Fainelli
9d38989d1f update livebox board support (#8677)
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

SVN-Revision: 32087
2012-06-06 15:44:56 +00:00
Florian Fainelli
c69a2cdfbb fix leds naming for all bcm63xx boards
SVN-Revision: 32086
2012-06-06 15:44:52 +00:00
Florian Fainelli
23fc737b9d backport upstream spi-bcm63xx fixes
* message pump conversion
* not using stopping state
* setting spi driver mode bits

SVN-Revision: 32078
2012-06-06 13:31:33 +00:00
Florian Fainelli
4112094dbb increase led number in patch 301-led_count.patch
So that board patches are only touching board-related code

SVN-Revision: 32076
2012-06-06 13:31:24 +00:00
Florian Fainelli
9a61b249c5 fix board patches so that new boards are withing appropriate ifdef
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

SVN-Revision: 32060
2012-06-05 13:40:41 +00:00
Florian Fainelli
36c99bcc42 fix bisectability of patch 303-spi-board-info.patch
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

SVN-Revision: 32058
2012-06-05 13:40:35 +00:00
John Crispin
a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Jonas Gorski
ffea8eb913 bcm63xx: fix ethernet on 96328avng and 963281TAN
The internal switch did not get registered.

SVN-Revision: 32041
2012-06-04 08:35:25 +00:00
Jonas Gorski
3fc76fb781 bcm63xx: build images for 6328 reference boards with various flash sizes
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

SVN-Revision: 32004
2012-05-30 10:27:46 +00:00
Jonas Gorski
c454ba3657 bcm63xx: readd accidentially dropped network config for SPW303V
SVN-Revision: 32003
2012-05-30 10:27:42 +00:00
Jonas Gorski
ec7786c2ec bcm63xx: build images for DSL-274XB revision F1
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

SVN-Revision: 31885
2012-05-27 13:22:51 +00:00
Jonas Gorski
8aac009cc9 bcm63xx: add ath9k to atheros wifi profile
SVN-Revision: 31884
2012-05-27 13:22:48 +00:00
Jonas Gorski
4aa43122ab bcm63xx: enable bcm6328 support and required drivers
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
2012-05-27 13:22:46 +00:00
Jonas Gorski
e5575fe335 bcm63xx: add support for DSL-274XB rev F1
SVN-Revision: 31882
2012-05-27 13:22:43 +00:00
Jonas Gorski
a7a82db16f bcm63xx: fix port state after network down
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

SVN-Revision: 31881
2012-05-27 13:22:40 +00:00
Jonas Gorski
e19ed52fd1 bcm63xx: add a fixup for ath9k devices
SVN-Revision: 31880
2012-05-27 13:22:37 +00:00
Jonas Gorski
e34018cc9e bcm63xx: add support for the HSSPI controller
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
2012-05-27 13:22:33 +00:00
Jonas Gorski
099d5eec06 bcm63xx: add preliminary support for bcm6328
SVN-Revision: 31878
2012-05-27 13:22:29 +00:00
Jonas Gorski
7dbb132c88 bcm63xx: add flash type detection
SVN-Revision: 31877
2012-05-27 13:22:25 +00:00