Commit graph

996 commits

Author SHA1 Message Date
Kevin Darbyshire-Bryant
89233a8c49 base-files: sysupgrade: correct command help text
Commit 30f61a34b4 claimed to drop -d & -p
options. In reality only -d was dropped.  Update command help text to
reflect that -d is no longer a supported option.

Fixes FS#1187

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-01-12 16:06:04 +01:00
Martin Schiller
1b1388f640 linux-atm: add br2684ctl option to specify the netdev name
Add the uci option nameprefix to specifc a target netdev name. Patch the
br2684ctl code to accept and set a netdev name via commandline parameters.

It allows to use the same netdev name for ATM and PTM lines on lantiq
xdsl hardware.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Mathis Kresin <dev@kresin.me>
2018-01-10 08:08:53 +01:00
Mathias Kresin
e66c47fb14 base-files: gpio switch: set output value with direction
Use the "low" and "high" values to configure the GPIO as an output with
that initial value. It ensures that the gpio doesn't have a unwanted value
during the time the direction is set to ouput and the actual value is
applied.

We don't need to take care of the GPIO polarity for now, since our
exported GPIOs are always active low.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:05:46 +01:00
Mathias Kresin
ff874b656b base-files: gpio_switch: start before boot state done is set
Start gpio_switch before the boot state is set to up/initialised/done.
This way the exported GPIOs are available at the time rc.local is started.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:05:46 +01:00
Roman Yeryomin
8b477d09d1 base-files: protect stop and reload actions with procd_lock
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Andrejs Hanins <ahanins@gmail.com>
2018-01-02 07:52:57 +01:00
Roman Yeryomin
0b1fa809d0 base-files: rc.common: fix enable() return code and logic
In current state, if there is START but no STOP, enbale()
will return 1 (failure), which is wrong.
Moreover there is no need to check for START/STOP twice.
Instead, add err variable to save success state and
and return it's value.
Also eliminate the need to disable() by using 'ln -sf',
which will first delete the old symlink if one exists.

Changes from v1:
- fixed description

Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-01-02 07:14:08 +01:00
Matthias Schiffer
302aa793c0
base-files: fix logic when to show failsafe banner
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Fixes: 8170f280c4 ("base-files: set FAILSAFE in /etc/profile when
/tmp/.failsafe exists")
2017-12-29 15:58:16 +01:00
Matthias Schiffer
8170f280c4
base-files: set FAILSAFE in /etc/profile when /tmp/.failsafe exists
Since dropbear clears the environment, FAILSAFE was not set as intended in
failsafe mode. This also broke sysupgrade from failsafe mode over SSH.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-12-29 14:34:03 +01:00
Luiz Angelo Daros de Luca
3e98674bcf base-files: fix sysupgrade -b/-l when -c is used
Since /overlay/upper appeared, -b ignored -c silently (cause it was
still checking for /overlay/etc). Now, if /overlay/upper is absent,
sysupgrade -c will fail and exit verbosely.

Fix -l to consider -c (it never did).

Clean up to always use /overlay/upper/xxx instead of still checking
for /overlay/xxx.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2017-12-14 09:29:30 +01:00
Christian Lamparter
da6fdce365 base-files: unify get_dt_led helper function
Lantiq and IPQ806X (which includes IPQ40XX) both define the
same custom function {ipq806x|lantiq}_get_dt_led.

This patch moves the function into the base-file package at
lib/functions/leds.sh to make it more accessible for other
targets as well.

Cc: Mathias Kresin <dev@kresin.me>
Cc: John Crispin <john@phrozen.org>
Cc: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-12-14 09:29:30 +01:00
Matthias Schiffer
d573b1287e
base-files: remove remaining uses of %N, and drop VERSION_NICK config symbol
Fixes d23e1e1e1a "merge: properly remove %n / %N references"

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-12-09 23:27:41 +01:00
Jo-Philipp Wich
d23e1e1e1a merge: properly remove %n / %N references
- use %d instead of %n for opkg feed identifiers
- remove %n / %N references from version files

Fixes bf5cef47b3 merge: release/banner: drop release name and update banner.
Fixes FS#1213.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-12-09 16:01:14 +01:00
Mathias Kresin
93bd46b719 procd: nand: remove nand_board_name platform override
It isn't uses anymore by any target.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-08 20:57:12 +01:00
Mathias Kresin
c90a8cb755 procd: nand: dont rely on boardname in nand_upgrade_tar
Kernel and rootfs in a subdirectory matching the userspace boardname,
was intended to use a single sysupgrade-tar archive for multiple boards
with different kernel/rootfs images. This feature was never used.

Use the first found directory in the tar archive instead of relying on
a directory named according to the userspace boardname.

It allows to change the boardname without adding another compatibility
layer - using the nand_board_name() function - for (sub)targets using
the metadata based image validation in favour to
nand_do_platform_check().

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-08 20:57:12 +01:00
Christian Lamparter
4e3f6dae04 base-files: upgrade: make get_partitions() endian agnostic
This patch fixes two issues with the current get_partitions()
function.

First: "Invalid partition table on $disk" will pop up on
legitimate images on big endian system.

This is because the little-endian representation of "55 AA" is
assumed in the context of little-endian architectures. On these
comparing it to the 16-bit word 0xAA55 does work as intented.
Whereas on big-endian systems, this would have to be 0x55AA.

This patch fixes the issue by replacing the integer conversion
and value match check with just a string comparision.

Second: The extraction of the type, start LBA and LBA num from
the partition table has the same endianness issue. This has been
fixed by using the new hex_le32_to_cpu() function. This function
will translate the stored little-endian data to the correct
byte-order if necessary.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-12-08 19:54:16 +01:00
Zoltan HERPAI
bf5cef47b3 merge: release/banner: drop release name and update banner
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Zoltan HERPAI
34bbbbf9c3 merge: base: update base-files and basic config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Mat Trudel
2dca7177e7 sysupgrade: don't kill our own parent
Add the parent of the sysupgrade script to the list of pids not getting
killed

Signed-off-by: Mat Trudel <mat@geeky.net>
Signed-off-by: John Crispin <john@phrozen.org>
2017-11-15 21:11:23 +01:00
Pierre Lebleu
832b6b8305 procd: service_data: Support data within the service itself
Use the same approach than the service_triggers for the service_data.

Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
2017-11-10 23:31:27 +01:00
Yousong Zhou
b2aa820b48 base-files: fix getting gid from group_add_next
Shell function return code only has range [0, 255].  Other values will
be truncated, e.g. return 65536 will have the same effect as return 0

While at it, drop other "return $rc" where rc will almost always take
value 0 and whose value current callers actually do not check

Fixes FS#988

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-11-09 17:42:36 +08:00
Marko Ratkaj
73c745f64f functions.sh: fix default_postinst function
When we run "opkg install" on a package that installs an uci-defaults
script, functions.sh will fail to evaluate that script in its
default_postinst function.

This happens because there is no "./" present and it searches for the
file in paths specified by the PATH variable. This would work on bash,
but it will not work on ash and some other shells like sh, zsh. This
applys to the ". filename" directive used in this case.

This patch will make the path relative to the /etc/uci-defaults
directory.

Fixes: FS#1021

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-11-08 23:18:22 +01:00
Jo-Philipp Wich
2b6facc8d4 include: kernel.mk: simplify module autoloading
Let the generic postinstall script invoke "kmodloader" when the just
installed package contains any /etc/module.d/ entries.

This allows us to skip the explicit "insert_module()" calls in the
package postinstall.

Due to the removed insert_module calls we do not need to assemble a
complete list of modules per package anymore, which allows for vast
simplification of the package generation code.

While we're at it, also support specifying default parameters for
modules using either the MODPARAM or MODPARAM.modulename variables
in KernelPackage.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-11-07 12:02:06 +01:00
Edmunt Pienkowsky
fdc7cc9907 base-files: add interval option to netdev LED trigger configuration
Add an uci option to set the interval parameter of the netdev trigger.

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
2017-11-03 20:04:52 +01:00
Hans Dedecker
400c5f03c3 base-files: fix wan6 interface config generation for pppoe
Setting ipv6 to auto in case of a pppoe interface will trigger the
creation of a dynamic wan_6 interface meaning two IPv6 interfaces
(wan6 and wan_6) will be active on top of the pppoe interface.
This leads to unpredictable behavior in the network; therefore set
ipv6 to 1 which will prevent the dynamic creation of the wan_6
interface.
Further alias the wan6 interface on top of the wan interface for pppoe
as the wan6 interface can only be started when the link local address is
ready. In case of pppoe the link local address is negotiated during the
Internet Protocol Control Protocol when the PPP link is setup meaning
all the IP address info is only available when the wan interface is up.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-18 09:57:34 +02:00
Kevin Darbyshire-Bryant
7765e442d0 basefiles: allow suid coredumps
Set sysctl fs.suid_dumpable = 2

This allows suid processes to dump core according to kernel.core_pattern
setting.  LEDE typically uses suid to drop root priviledge rather than
gain it but without this setting any suid process would be unable to
produce coredumps (e.g. dnsmasq)

Processes still need to set a non zero core file process limit ('ulimit
-c unlimited' or if procd used 'procd_set_param limits
core="unlimited"') in order to produce a core.  This setting removes an
obscure stumbling block along the way.

>From https://www.kernel.org/doc/Documentation/sysctl/fs.txt

suid_dumpable:

This value can be used to query and set the core dump mode for setuid
or otherwise protected/tainted binaries. The modes are

0 - (default) - traditional behaviour. Any process which has changed
	privilege levels or is execute only will not be dumped.
1 - (debug) - all processes dump core when possible. The core dump is
	owned by the current user and no security is applied. This is
	intended for system debugging situations only. Ptrace is unchecked.
	This is insecure as it allows regular users to examine the memory
	contents of privileged processes.
2 - (suidsafe) - any binary which normally would not be dumped is dumped
	anyway, but only if the "core_pattern" kernel sysctl is set to
	either a pipe handler or a fully qualified path. (For more details
	on this limitation, see CVE-2006-2451.) This mode is appropriate
	when administrators are attempting to debug problems in a normal
	environment, and either have a core dump pipe handler that knows
	to treat privileged core dumps with care, or specific directory
	defined for catching core dumps. If a core dump happens without
	a pipe handler or fully qualifid path, a message will be emitted
	to syslog warning about the lack of a correct setting.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2017-09-12 22:18:45 +02:00
Rafał Miłecki
1e13c6f77f base-files: drop unused preinit_echo function
It isn't used for years since the old 99_10_run_init has been dropped.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-09 23:23:06 +02:00
Rafał Miłecki
f41dd32722 base-files: don't setup network in preinit if failsafe is disabled
With failsafe disabled there is no point in early network setup. We
don't send announcement over UDP and there is no way to ssh to the
device.

A side effect of this is avoiding a possibly incorrect network config
(only with failsafe disabled). This problem is related to possible
changes made by user in /etc/config/network.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-09 23:18:59 +02:00
Florian Eckert
c31f0421ce base-files: suppress uci not found output in login.sh
Fix "uci: Entry not found" output if "ttylogin" is not set in
"etc/config/system"

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2017-08-04 23:11:19 +02:00
Matthias Schiffer
1ab227d688
base-files: upgrade: don't loop forever trying to kill processes
When processes don't die on SIGKILL (usually because of kernel bugs), it's
better to give up instead of looping forever.

upgraded will trigger a reboot in this case (and if this fails, a hardware
watchdog will eventually time out and reset the system, if present).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-20 21:41:33 +02:00
Mathias Kresin
ac3e05c5d7 treewide: populate boardname and model earlier
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Matthias Schiffer
438dcbfe74
base-files: automatically handle paths and symlinks for RAMFS_COPY_BIN
Depending on busybox applet selection, paths of basic utiilties may differ,
and may not work as symlinks to busybox. Simply using whatever binary is
found in PATH and detecting symlinks automatically is more robust and
easier to maintain.

The list of binaries is also slightly cleaned up and duplicates are
removed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-11 17:26:32 +02:00
Matthias Schiffer
73f675415c
bcm53xx: upgrade: fix RAMFS_COPY_*
Fixes: 30f61a34b4 "base-files: always use staged sysupgrade"
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-11 17:19:23 +02:00
Matthias Schiffer
7a29e44f90
base-files: upgrade: correctly handle nand_do_upgrade argument passed from preupgrade
Fixes: 30f61a34b4 "base-files: always use staged sysupgrade"
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-11 17:19:23 +02:00
Jo-Philipp Wich
5523ee3459 base-files: add "tty" user group
This is needed for an upcoming change to the hotplug default rules which
will cause /dev/tty* nodes to get assigned to the "tty" group in order
to support unprivileged user access when needed.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-06-26 10:02:20 +02:00
Yousong Zhou
f334a0cdb8 base-files: allocate uid/gid starting from 65536
There already exist static assignment of uid/gid 65533 in packages feed
and we have nobody/nogroup taking 65534 as their ids.  Let's change the
pid of dynamic assignment to start from 65536 so that the two assignment
scheme will not collide with each other

While at it, fix the scan command checking existence of uid/gid

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-06-18 10:39:35 +08:00
Mathias Kresin
4cdbf4014b base-files: make ucidef_set_led_rssi offset and factor optional
The offset and factor are only related for LEDs which can have
different brightness values. But binary LEDs are more common and don't
require any further configuation than setting the factor to 1.

Use offset = 0 and factor = 1 in case nothing else is specified.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-17 15:38:19 +02:00
Jonas Gorski
fd952c7a83 base-files: board.json's switch reset means existence, not argument
Don't pass the value unconditionally to swconfig as a parameter but
instead only call reset if it is 1.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-11 12:50:14 +02:00
Jo-Philipp Wich
6426e4edef base-files: network.sh: fix a number of IPv6 logic flaws
* Change network_get_subnet6() to sensibly guess a suitable prefix

  Attempt to return the first non-linklocal, non-ula range, then attempt
  to return the first non-linklocal range and finally fall back to the
  previous behaviour of simply returning the first found item.

* Fix network_get_ipaddrs_all()

  Instead of replicating the flawed logic appending a fixed ":1" suffix
  to IPv6 addresses, rely on network_get_ipaddrs() and network_get_ipaddrs6()
  to build a single list of all interface addresses.

* Fix network_get_subnets6()

  Instead of replicating the flawed logic appending a fixed ":1" suffix
  to IPv6 addresses, rely on the ipv6-prefix-assignment.local-address
  field to figure out the proper network address.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-06-08 20:12:52 +02:00
Jo-Philipp Wich
7f91cabd0d base-files: network.sh: properly report local IPv6 addresses
Rework the network_get_ipaddr6() and network_get_ipaddrs6() functions to
fetch the effective local IPv6 address of delegated prefix from the
"local-address" field instead of naively hardcoding ":1" as static suffix.

Fixes FS#829.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-06-08 12:06:01 +02:00
Matthias Schiffer
5654a03768
mvebu: fix sysupgrade
mvebu was modifying RAMFS_COPY_BIN and RAMFS_COPY_DATA from a
sysupgrade_pre_upgrade hook. As the ramfs is created from stage2, this
did not have an effect anymore after the staged sysupgrade changes.

As it doesn't really hurt to copy fw_printenv and fw_setenv
unconditionally, simply add them in /lib/upgrade/platform.sh, so stage2
will see them.

Config copying is moved to a function called by platform_copy_config, where
it belongs.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Fixes: FS#821
Fixes: 30f61a34b4 "base-files: always use staged sysupgrade"
2017-06-01 20:41:19 +02:00
Christian Lamparter
7783f31359 base-files: nand: use CI_KERNPART whenever the kernel volume is needed
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
This patch is in continuation of: commit 93aa860405
"procd: nand: make it possible to configure kernel and ubi partition"

The $CI_KERNPART variable should be used in place
of the fixed "kernel" partition name. This allows
targets to specifiy alternate names for the kernel
partition.

Cc: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2017-05-31 09:55:01 +02:00
Matthias Schiffer
a5428244d9
base-files: add support for staged sysupgrades from failsafe mode
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
b2adb9a7b5
base-files: sysupgrade cleanup
Some functions only used by stage2 are moved there from common.sh.

One piece that could still use more cleanup is platform_pre_upgrade: many
targets reference files from there are aren't available in the ramfs, so
we need to evaluate it before the switch; conversely, flash writes happen
in that function on some targets. Targets that do the latter should be
fixed eventually to use platform_do_upgrade for that purpose.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
30f61a34b4
base-files: always use staged sysupgrade
Support for the -d and -p options is dropped; it may be added again at some
point by adding these flags to the ubus sysupgrade call.

A downside of this is that we get a lot less information about the progress
of the upgrade: as soon as the actual upgrade starts, all shell sessions
are killed to allow unmounting the root filesystem.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:32 +02:00
Matthias Schiffer
393817df5d
procd: remove procd-nand package
We always want to support staged upgrades now, so it's better to include
upgraded into the main package. /lib/upgrade/nand.sh is moved to
base-files.

The procd-nand-firstboot package is removed for now, it may return later
as a separate package.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:32 +02:00
Jo-Philipp Wich
361c8b4ee4 Revert "sysupgrade: run only one instance at a time."
This reverts commit e96a9a9af8.

The change breaks sysupgrade through LuCI and two-stage sysupgrade on
NAND targets. There is also a mismatch of file paths in lock and unlock
operations.

This commit was apparently neither properly tested, nor reviewed, so
drop it for now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-26 14:49:08 +02:00
Kenneth Johansson
e96a9a9af8 sysupgrade: run only one instance at a time.
Things do not work well if running multiple instances of
upgrade at the same time.

Signed-off-by: Kenneth Johansson <kenneth.johansson@inteno.se>
2017-05-25 09:22:43 +02:00
Alexandru Ardelean
c7ee30d53a base-files: fix default procd reload
Bug introduced with 6713694.

I did not count on procd handling reload as mentioned
in this doc:
https://wiki.openwrt.org/inbox/procd-init-scripts

```
procd_set_param file /var/etc/your_service.conf # /etc/init.d/your_service reload will restart the daemon if these files have changed
procd_set_param netdev dev # likewise, except if dev's ifindex changes.
procd_set_param data name=value ... # likewise, except if this data changes.
```

The service would be restarted regardless of any of those params.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-05-20 20:43:45 +02:00
Alberto Bursi
4242ddf8f2 base-files: add led functions to uci-defaults.sh
uci_set_leds_ataport() allows to set a led to show activity
on a specific (s)ata port, which is needed for devices that have
a Sata led for each sata port.
The led trigger is from the 834-ledtrig-libata.patch LEDE kernel patch.

uci_set_leds_usbhost() allows to set a led to show total usb activity.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[Jo-Philipp Wich: use a single underscore to denote private functions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:45:50 +02:00
Alberto Bursi
b06a286a48 base-files: cleanup led functions in uci-defaults.sh
create a function with code common to all led functions,
create another function with code common to functions setting
a simple led trigger, restore alphabetical order in function names.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[Jo-Philipp Wich: use a single underscore to denote private functions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:45:50 +02:00