Commit graph

59 commits

Author SHA1 Message Date
Luka Perkov
27fa640548 lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
John Crispin
54b4074074 lantiq: add TP-Link TDW8970 image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37543
2013-07-25 20:29:24 +00:00
John Crispin
313636c1e4 lantiq: fix initramfs image generation for lzmaloader based images
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37540
2013-07-25 20:29:10 +00:00
Luka Perkov
1a3ad5a037 lantiq: add device tree support for arv4519pw
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37178
2013-07-05 07:44:42 +00:00
Luka Perkov
14b6674b39 lantiq: fix initramfs
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37143
2013-07-03 09:17:15 +00:00
John Crispin
157c86371f lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
John Crispin
d3d18ae812 lantiq: make lzma-loader based images for VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36440
2013-04-25 19:03:21 +00:00
John Crispin
a46acc80e4 lantiq: update VG3503J.dts to match new partition layout
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36439
2013-04-25 19:03:17 +00:00
John Crispin
46306c2e47 lantiq: add lzma-loader source
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36438
2013-04-25 19:03:13 +00:00
John Crispin
d5f87e193c add VG3503J support
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
John Crispin
4d5860cdd6 ACMP252: fix USB-enable GPIO and use default PCI configuration for now
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 36030
2013-03-14 18:43:54 +00:00
John Crispin
0dbe4f502d fix buttons on vr9 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36029
2013-03-14 18:43:49 +00:00
John Crispin
0f7f1f3347 fix fritzbox 3370 partitions/memory/cmdline
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36027
2013-03-14 18:43:39 +00:00
John Crispin
5452dbad61 build jffs images for nand based fritzbox
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36026
2013-03-14 18:43:34 +00:00
John Crispin
48a4b3a0cd fixes NO_XIP on CFI0001 flash
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 35992
2013-03-12 13:53:08 +00:00
John Crispin
e3a6ea65e1 add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
John Crispin
0b881eea72 unbreak dgn3500 spi-gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35989
2013-03-12 13:52:47 +00:00
John Crispin
0183df8ed9 Fix ARV7518 USB
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35354
2013-01-28 17:43:35 +00:00
John Crispin
3534757bb9 Add ath9k eeprom and pci fixup support
Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35353
2013-01-28 17:43:25 +00:00
John Crispin
5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A.
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
John Crispin
64910f4490 fixes USB reset on ARV7518
SVN-Revision: 35077
2013-01-10 06:44:58 +00:00
John Crispin
ce57efa3ea fixes usb port on arv 4518
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
John Crispin
efe3225e2b ar9 did not load atm driver properly
SVN-Revision: 34840
2012-12-22 10:16:52 +00:00
John Crispin
3134205dfd minor tweaks to WBMR image
SVN-Revision: 34835
2012-12-21 20:03:54 +00:00
John Crispin
861bf6af49 fix typo inside fritz3370 devicetree file
SVN-Revision: 34825
2012-12-21 14:41:30 +00:00
John Crispin
54c096527a more devicetree fixes
SVN-Revision: 34824
2012-12-21 13:47:55 +00:00
John Crispin
5495ffbfdf more board file fixes
SVN-Revision: 34788
2012-12-19 15:17:11 +00:00
John Crispin
b637eb598d add falcon devicetree files
SVN-Revision: 34711
2012-12-16 10:03:11 +00:00
John Crispin
85e4da7e23 EASY80920 has 2 usb ports
SVN-Revision: 34701
2012-12-15 11:01:11 +00:00
John Crispin
2c33df0376 add devicetrees
SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
John Crispin
3a948770cf add linux-v3.7
SVN-Revision: 34687
2012-12-15 01:59:45 +00:00
John Crispin
88e4d93802 a few more dts files (WIP)
SVN-Revision: 34130
2012-11-09 19:26:43 +00:00
John Crispin
3a1851964e add support for arv7525
SVN-Revision: 34097
2012-11-06 07:38:24 +00:00
John Crispin
a9ad36b7f1 adds dts files and make devicetree images buildable
SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
John Crispin
f5f36911f0 add lantiq svip support
SVN-Revision: 32925
2012-07-31 18:49:54 +00:00
John Crispin
95e69ac4f1 clean up generic image building
SVN-Revision: 32065
2012-06-05 17:49:42 +00:00
John Crispin
3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
2012-05-27 16:02:16 +00:00
John Crispin
07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin
5ea100c39b cleanup image makefile
SVN-Revision: 31063
2012-03-25 08:50:32 +00:00
John Crispin
0f6a9d5c7c bump kernel to 3.2.12
SVN-Revision: 31060
2012-03-25 08:50:09 +00:00
John Crispin
cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
John Crispin
3833b7be24 add support for more lantiq AR9 boards
SVN-Revision: 27694
2011-07-19 18:06:33 +00:00
John Crispin
5906377332 * add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
2011-07-17 19:27:44 +00:00
John Crispin
7f548d379f fix generation of falcon images for profiles
SVN-Revision: 27550
2011-07-07 20:20:51 +00:00
John Crispin
a463daa818 replace all references to xway with danube
SVN-Revision: 27538
2011-07-07 18:20:37 +00:00
John Crispin
dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube
SVN-Revision: 27537
2011-07-07 18:20:31 +00:00
John Crispin
43771202d3 update lantiq/falcon patches
SVN-Revision: 27406
2011-07-03 17:38:11 +00:00
John Crispin
fa59bb0958 * move patches around * add basic support for gigaset sx76x
SVN-Revision: 27158
2011-06-12 08:56:26 +00:00
John Crispin
ed0e649a5b * fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)

SVN-Revision: 27137
2011-06-08 17:57:55 +00:00
John Crispin
6608f419d1 * backport 2.6.8 patches to .39 / .32.33
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support

SVN-Revision: 27026
2011-05-29 21:19:26 +00:00