Commit graph

18 commits

Author SHA1 Message Date
Yangbo Lu
2b1ec44dbd layerscape: add ls1012afrdm device support
The QorIQ FRDM-LS1012A Board is an ultra-low-cost
development platform for QorIQ LS1012A Series Network
Processors built on ARM Cortex-A53 processor.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
9e7b166704 layerscape: enlarge ext4 rootfs size to 30MB
This patch is to enlarge ext4 rootfs size to 30MB.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
5b8639f02e layerscape: add ppa firmware package
This patch is to add PPA (The Primary Protected Application)
package and also enable it for all layerscape devices.
LSDK github provides ppa source code git tree, but it
only could be compiled with 64-bit toolchain. For 32-bit
devices, there was no method to use it.
https://github.com/qoriq-open-source/ppa-generic

This patch is to directly use a private ppa binary tree for
both 32-bit and 64-bit devices.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
82fbca8aaa layerscape: support LSDK ppfe
This patch is to use ppfe git tree on LSDK github
instead of private git tree, and support the latest
ppfe on ls1012ardb.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
47cff4cf5f layerscape: support all-in-one firmware for ls1088ardb/ls2088ardb
Suppport all-in-one firmware for ls1088ardb/ls2088ardb by
integrating u-boot/rcw/mc/dpl/restool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
67c0c5978d layerscape: only support 64-bit for ls1088ardb/ls2088ardb
This is no requirement and plan to support 32-bit for ls1088ardb
and ls2088ardb. Current 32-bit firmware for them couldn't work,
so only keep 64-bit support for these two boards in menuconfig.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-12 23:40:27 +02:00
Yangbo Lu
9c9f7b0434 layerscape: select sdk dts for ls1043ardb/ls1046ardb
ls1043ardb/ls1046ardb should use sdk dts. This patch is
to fix this.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:23 +02:00
Yangbo Lu
e3f47958dd layerscape: make uImage with zImage for 32-bit kernel
uImage should be made with zImage. This patch is to support
making uImage with zImage.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
a5ad3a2c80 layerscape: update memory layout according to LSDK
The uniform memory layout of NOR/QSPI/NAND/SD media on all Layerscape platforms:
+-----------------------------+---------|--------------|-----------------+
|Firmwre Definition           | MaxSize | Flash Offset | SD Start Block #|
|-----------------------------|---------|--------------|-----------------|
|RCW+PBI                      | 1MB     | 0x00000000   | 0x00008         |
|-----------------------------|---------|--------------|-----------------|
|Boot firmware(U-Boot,UEFI)   | 2MB     | 0x00100000   | 0x00800         |
|-----------------------------|---------|--------------|-----------------|
|Boot firmware Environment    | 1MB     | 0x00300000   | 0x01800         |
|-----------------------------|---------|--------------|-----------------|
|PPA firmware                 | 2MB     | 0x00400000   | 0x02000         |
|-----------------------------|---------|--------------|-----------------|
|Secure boot headers          | 3MB     | 0x00600000   | 0x03000         |
|-----------------------------|---------|--------------|-----------------|
|DPAA1 FMAN ucode             | 256KB   | 0x00900000   | 0x04800         |
|-----------------------------|---------|--------------|-----------------|
|QE/uQE firmware              | 256KB   | 0x00940000   | 0x04A00         |
|-----------------------------|---------|--------------|-----------------|
|Ethernet PHY firmware        | 256KB   | 0x00980000   | 0x04C00         |
|-----------------------------|---------|--------------|-----------------|
|Scripts                      | 256KB   | 0x009C0000   | 0x04E00         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 MC firmware            | 3MB     | 0x00A00000   | 0x05000         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 DPL                    | 1MB     | 0x00D00000   | 0x06800         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 DPC                    | 1MB     | 0x00E00000   | 0x07000         |
|-----------------------------|---------|--------------|-----------------|
|Device tree(needed by uefi)  | 1MB     | 0x00F00000   | 0x07800         |
|-------------+---------------|---------|--------------|-----------------|
|Kernel       |               | 16MB    | 0x01000000   | 0x08000         |
|-------------| kernel.itb    |---------|--------------|-----------------|
|Ramdisk rfs  |               |32MB     | 0x01100000   | 0x08800         |
+-------------+---------------+---------|--------------|-----------------+

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
806624add5 layerscape: rename subtargets and update makefile files
Rename subtargets 32b/64b with armv8_32b/armv8_64b which are
more proper, and update makefile files. There also will be other
subtargets added in the future, like armv7.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Jo-Philipp Wich
c6502ce3bb layerscape: put u-boot and ucode images into image staging directory
Do not put the u-boot and ucode images into the kernel build directory as this
directory might get removed after kernel updates while the u-boot packages
InstallDev recipe is not getting re-executed because it is still considered
current, leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Yutang Jiang
799d0dddf6 layerscape: add ls2088ardb device support
The QorIQ LS2088A processor is built on the Layerscape
architecture combining eight ARM A72 processor cores
with advanced, high-performance datapath acceleration
and network, peripheral interfaces required for
networking, telecom, wireless infrastructure, aerospace
applications and general-purpose embedded applications.

Features summary:
- Eight 64-bit ARM v8 Cortex-A72 CPUs
- Two 64-bit DDR4 SDRAM memory controller with ECC
- One 32-bit DDR3 SDRAM memory controller with ECC
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- IFC, 4 PCIe, 2 SATA, 2 USB, 1 SDXC, 2 DUARTs etc

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2017-01-03 15:19:15 +01:00
Yutang Jiang
1866368a8a layerscape: add ls1088ardb device support
LS1088A is an ARMv8 implementation combining eight ARM A53 processor
cores. The LS1088ARDB is an evaluatoin platform that supports the
LS1088A family SoCs.

Features summary:
- Eight 64-bit ARM v8 Cortex-A53 CPUs
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- QUADSPI flash, 3 PCIe, 2 USB, 1 SD, 2 DUARTs etc

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2017-01-03 15:19:15 +01:00
Yutang Jiang
ad907e1c03 layerscape: add 64b/32b target for ls1046ardb device
Add support for NXP layerscape ls1046ardb 64b/32b Dev board.

LS1046ARDB Specification:
-------------------------
Memory subsystem:
* 8GByte DDR4 SDRAM (64bit bus)
* 512 Mbyte NAND flash
* Two 64 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
* On-board 4G eMMC
Ethernet:
* Two XFI 10G ports
* Two SGMII ports
* Two RGMII ports
PCIe:
* PCIe1 (SerDes2 Lane0) to miniPCIe slot
* PCIe2 (SerDes2 Lane1) to x2 PCIe slot
* PCIe3 (SerDes2 Lane2) to x4 PCIe slot

* USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port
* UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-12 09:57:40 +01:00
Yutang Jiang
4162a7eba6 layerscape: ls1012ardb: only reserve ext4 fs as default firmware.bin
In Device/ls1012ardb IMAGES variable, there are two separate firmware
references to the same packages, while do mult-job compile, the same package
build process will arise conflict occasionally. So, only reserve one ext4 fs
as the default firmware.bin.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-11-16 10:54:33 +01:00
Yutang Jiang
10889d3ebe layerscape: ls1043ardb: add pad-rootfs to reduce the size of firmware.bin
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-11-16 10:54:33 +01:00
Yutang Jiang
15a14cf166 layerscape: add 64b/32b target for ls1012ardb device
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00
Yutang Jiang
c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00