Commit graph

1095 commits

Author SHA1 Message Date
Zoltan HERPAI
7b5c989ab9 merge: targets: update image generation and targets
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Kevin Darbyshire-Bryant
9c82861cb8 kernel: update 4.4 to 4.4.86
Refresh patches

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-05 08:43:39 +02:00
Daniel Gonzalez Cabanelas
c7b4b4cee2 brcm63xx: Add Comtrend AR-5315u support
Add support for the Comtrend AR-5315u router

This a BCM6318 based board, 64 MB RAM, 16 MB SPI flash,
with an onboard BCM43217 wifi, 4 ethernet ports and 1
USB host port

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: refreshed patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-08-26 12:03:55 +02:00
Mathias Kresin
b27977b41b brcm63xx: add NULL clock fix send upstream
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.

Fixes: FS#735

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-29 09:24:27 +02:00
Hauke Mehrtens
39e8ab17d5 kernel: update kernel 4.4 to version 4.4.79
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-28 22:46:26 +02:00
Paul Wassi
0d4cda8a3b brcm63xx: DTS: fix AV4202N flash layout
Fix incorrect offset and size of linux partition.

Fixes: 97b36aca09 ("brcm63xx: add pflash for remaining pflash equipped boards")
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-07-27 12:12:21 +02:00
Mathias Kresin
e0b9ec8e96 treewide: drop target board_name functions
They are not used any longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
ac3e05c5d7 treewide: populate boardname and model earlier
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Jonas Gorski
a0bb6c91fe brcm63xx: remove misleading warning about partial SPI NOR writes
The warning will be triggered by jffs2 or UBI, and partial writes are no
issue for most flash chips.

Fixes: 2a2b16210b ("brcm63xx: backport upstream solution for SPI message size limits")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-07-05 11:24:24 +02:00
Jonas Gorski
beaaf214f7 brcm63xx: refresh smp config
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-30 12:13:08 +02:00
Jonas Gorski
d131e36e41 brcm63xx: enable KEXEC for SMP again
It seems it compiles again, so there is no reason to keep it disabled.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-30 12:12:38 +02:00
Jonas Gorski
2983576bae brcm63xx: disable commandline parts parser
We don't use it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-30 12:12:32 +02:00
Anthony Sepa
f9b67b89d3 brcm63xx: add support for the Actiontec R1000H gateway
SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz)
Flash size: 32MB (split 16/16 dual boot)
RAM size: 64MB
Wireless: BCM432x 802.11a/b/g/n(pci)
Ethernet: Broadcom BCM53115
USB: 1 x USB 2.0

Known issues:
 - Unable to detect 53115 switch attached to MDIO. Not supported
 - No support for the cable port

More info on the device and the research can be found at:
http://www.actiontec.com/212.html

Same FCC ID as:
https://wikidevi.com/wiki/Actiontec_V1000H_(Telus)

Signed-off-by: Anthony Sepa <anthonysepa@yahoo.ca>
[jonas.gorski: fix commit subject/message]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-30 12:12:17 +02:00
Jonas Gorski
1dc7a0cfd5 brcm63xx: fix bcm6328 pinmux other register
The pinmux register is at relative offset 0x8, not 0xc. Fixes hang
when trying to modify pins >= 32.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-30 12:12:06 +02:00
Stijn Tintel
880f73c327 kernel: cleanup CONFIG_SCHED_HRTICK
Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd76563.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-29 04:46:59 +02:00
Jonas Gorski
b43c190079 brcm63xx: probe SPI connected switches through DT
Now that we can configure the switches through DT, do so.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:38 +02:00
Jonas Gorski
9ceeaf4c6c brcm63xx: switch to hardware led controllers
Instead of bit banging SPI to talk to the GPIO chip, use the hardware
led controllers intended for controlling the LEDs.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:38 +02:00
Jonas Gorski
0aa366c6e0 brcm63xx: leds-bcm6328: fix signal assignments for leds 4~7
Properly use modulus for bit calculation for LEDs 4 to 7.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:38 +02:00
Jonas Gorski
c5d394e9ba brcm63xx: dsl-275xb-d: configure switch leds
Add pinctrl configuration to configure the switch leds on DSL-275XB.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:38 +02:00
Jonas Gorski
0755c2d117 brcm63xx: add pinctrl support
Add and enable pincontrol drivers, and update dts(i) files with
appropriate hogs.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:37 +02:00
Jonas Gorski
f9b7bfa088 brcm63xx: backport upstream generic gpio changes
Backport patches that add a data pointer to gpio_chip.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:37 +02:00
Jonas Gorski
334f8f4fc3 brcm63xx: drop support for specifying SPI flash part parsers
No need to keep this since we set them from device-tree.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 11:33:44 +02:00
Jonas Gorski
092ac42e1e brcm63xx: drop support for caldata in brcm63xxpart
Now that we always provide these partitions through DT, we don't need to
pass their data through parser data from board files anymore.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 11:33:44 +02:00
Jonas Gorski
474cde6123 brcm63xx: probe SPI flash through DT
Now that we support problem the SPI controllers through DT, we can also
probe flash through DT.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 11:33:44 +02:00
Jonas Gorski
97b36aca09 brcm63xx: add pflash for remaining pflash equipped boards
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 11:33:44 +02:00
Jonas Gorski
31c3ac1118 brcm63xx: do not require fixed partitions when probing from DT
Allow the parser to be invoked from DT without fixed cfe/linux/nvram
partitions. This allows flash to be probed from DT also for multi
flash-size images.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 11:33:44 +02:00
Jonas Gorski
b50fd8c2b3 brcm63xx: register SPI controllers through DT
Register SPI controllers through device tree. We will wire up the clocks
at a later stage.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 11:33:43 +02:00
Jonas Gorski
2a2b16210b brcm63xx: backport upstream solution for SPI message size limits
Backport upstream solution for working around SPI controller maximum
message sizes.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 10:40:00 +02:00
Jonas Gorski
f62e02cf20 brcm63xx: update flash of_node patches to full patch set
Fixes missing of_node for SPI flash probed through devicetree.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 10:40:00 +02:00
Jonas Gorski
d298576739 brcm63xx: refresh kernel config
Ensure the config is ordered and has all recent symbols.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 10:40:00 +02:00
Marcin Jurkowski
063ee9d0bd brcm63xx: fix invalid Asmax AR 1004g DTS reference
Build profile for Asmax AR 1004g refers to an invalid DTS "rg100a". The
correct DTS for this device is "ar1004g".

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
2017-05-05 19:58:49 +02:00
Piotr Dymacz
f9a1f322d2 brcm63xx: diag.sh: use common status_led_blink_* functions
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-15 23:15:19 +01:00
Daniel Gonzalez Cabanelas
1e4ee5a318 brcm63xx: CPVA502+: add SPROM wifi
Add SPROM wifi to the kernel board data.

After this fix, the wifi won't work anyway due the lack
of RAM memory (16 MB). It will throw a kernel panic
when loading the b43 drivers.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-02-28 13:18:28 +01:00
Daniel Gonzalez Cabanelas
c5138d943b brcm63xx: CPVA502+: fix userspace support
Fix board name typo, fix network configuration and add a led trigger.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-02-28 13:18:27 +01:00
Daniel Gonzalez Cabanelas
d371581a2a brcm63xx: CPVA502+: fix image generation
Fix typo, erase pointless option and allow to build the image.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-02-28 13:18:27 +01:00
Daniel Gonzalez Cabanelas
dc3537415c brcm63xx: CPVA502+: fix LEDs and buttons at DTS
Leds are wrong and a button is missing, fix them.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-02-28 13:18:27 +01:00
Daniel Gonzalez Cabanelas
377315de4d brcm63xx: fix external IRQ edge type sense
Fix the register for configuring rising/falling edge

Rising should be sense=1, and falling sense=0.
The old driver used these values, but the new one have
them flipped.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-02-28 13:18:26 +01:00
Daniel Gonzalez Cabanelas
41ad9ed13a brcm63xx: Add Observa VH4032N support
Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 22:02:45 +01:00
Jonas Gorski
0127c480bb brcm63xx: Neufbox 6: fix switch by probing through DT
Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski
8b741d5cd1 brcm63xx: fix lzma loader for BCM6362
BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Paul Wassi
9d4f8ff4f6 brcm63xx: add support for Pirelli/ADB P.DG AV4202N
This patch adds support for the ADB P.DG AV4202N aka Pirelli PRG AV4202N.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski
31d5c5bc90 brcm63xx: setup internal switch leds for bcm6368
Setup the GPIO_MODE register bits for used internal switch port leds.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski
c7f31b280f brcm63xx: do a full reset phy cycle
Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski
dd7079e79a brcm63xx: implement gpio_to_irq for bcm63xx-gpio
Add support for mapping some GPIO lines to IRQs. GPIO to IRQ mappings
were found out through experimentation, helped by having the GPIO as
output still toggling the IRQ input.

Based-on: http://patchwork.ozlabs.org/patch/660534/
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:43 +01:00
Jonas Gorski
94bbd1f057 brcm63xx: fix external interrupts on BCM6318
Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:43 +01:00
Jo-Philipp Wich
770ac77cce brcm63xx: board.d: request untagged switch config where applicable
In order to prepare support for generating tagged switch configurations by
default, explicitely request untagged configs for boards which do not already
request tagging to retain default behaviour.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Felix Fietkau
1708644f19 kernel: backport MIPS changes introducing a separate IRQ stack
Prevents crashes when IRQs arrive when the current kernel stack context
already contains deeply nested function calls, e.g. when stacking lots
of network devices on top of each other

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-15 18:25:54 +01:00
Victor Shyba
d6c831e0e5 generic: mtd: backport SPI_NOR_HAS_LOCK
This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.

Signed-off-by: Victor Shyba <victor1984@riseup.net>
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-03 19:58:00 +01:00
Jo-Philipp Wich
fc6ed9521d brcm63xx: image: trim revision code used for --rsa-signature
The imagetag RSA signature field may not exceed 20 characters, so trim the
Git hash portion from the REVISION variable in order to ensure that the
resulting string fits within this field.

The current revision values may be longer than 20 chars, especially when
building within a dirty tree. In this case, the revision will look like
"r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long.

Fixes the following error spotted by the buildbots:

    Error: RSA Signature (rsa_signature,r) too long.
    make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:39:14 +01:00