Commit graph

2438 commits

Author SHA1 Message Date
John Crispin
e77ae183a1 ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42797
2014-10-06 04:53:34 +00:00
John Crispin
7f772910a1 ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection
[ ] conditions should use = instead of == for string equality.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42796
2014-10-06 04:53:25 +00:00
John Crispin
05777fb947 ar71xx: simplify TP-LINK model detection
All TP-LINK machine names begin with "TP-LINK", so there's no need to check for
more specific model names. This also allows adding new models like the Archer
series more easily.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42795
2014-10-06 04:53:20 +00:00
John Crispin
73acd5050f ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8)
Signed-off-by: Jaehoon You <teslamint@gmail.com>

SVN-Revision: 42792
2014-10-06 04:52:57 +00:00
John Crispin
491e028e2d ar71xx: add LED defaults for the EnGenius ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42786
2014-10-06 04:52:13 +00:00
John Crispin
e2c3c2280c ar71xx: fix reset button gpio for OM2P/OM2P-HS
A typo in the definition for the OM2P reset button disabled its functionality
in OpenWrt. The actual button for these two devices is "1" and not "11".

Signed-off-by: Oren Poleg <oren@poleg.org>
[sven@open-mesh.org: added a commit subject+message]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 42782
2014-10-06 04:51:51 +00:00
Felix Fietkau
61f960071d ar71xx: revert accidental kernel upgrade
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42687
2014-09-27 20:54:12 +00:00
Felix Fietkau
3e833dcf90 ar71xx: add wmac callback for reading soc revision on ar934x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42685
2014-09-27 20:52:05 +00:00
Felix Fietkau
84d81d5844 ar71xx: refresh 3.14 kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42684
2014-09-27 20:51:49 +00:00
John Crispin
7dbbdfb61f ar71xx: add qihoo 360 c301 router support
Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac.
Its chipset is AR9344 + AR9882 with two 16MB flashes.

This patch adds its initial support.

v2:
* use mtd_get_mac_ascii to fetch MAC address for ath10k.
* use ath79_register_pci to initialize AR9882.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 42552
2014-09-15 10:19:38 +00:00
John Crispin
cb37fe5ca5 ar71xx: add board support for ubnt loco m xw
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 42549
2014-09-15 10:19:14 +00:00
John Crispin
2c4c6d135b ar71xx: refactor ubnt xw board setup
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 42548
2014-09-15 10:19:01 +00:00
Felix Fietkau
1961f8cdb7 ar71xx: ack completed tx descriptors only after the full frame has been completed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42457
2014-09-10 12:56:24 +00:00
Felix Fietkau
60b81acd60 ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331
While the AR9331 has a gigabit MAC towards the internal switch, the
integrated PHYs however are only 100-base-tx capable.  The existing code
however advertieses gigabit capability in the link status word.  If you
attach such a PHY to a gigabit capable switch on the remote end, with
some probability it attempts to negotiate gigabit and fails, falling
baco to the AR9331 assuming a 10mbit half-duplex link.  This has been
observed quite frequently with the Carambola2 and gigabit capable
switches.

In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
for both AR9331 ethernet ports. This is most likely wrong. Despite the
two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
100base-T PHY via MII. The has_gbit attribute is used in the ethernet
driver to determine the supported link modes.

So either pdata->has_gbit is not set to 1 anymore, or the ethernet
driver needs to be modified to determine the advertised link code word
on another criteria than pdata->has_gbit.  This patch implements the
former solution.

Signed-off-by: Harald Welte <laforge@gnumonks.org>

SVN-Revision: 42432
2014-09-07 09:45:32 +00:00
Felix Fietkau
60eeadd0ba ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes (#13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42429
2014-09-06 17:51:48 +00:00
Felix Fietkau
2da2317fed ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42428
2014-09-06 17:51:44 +00:00
Felix Fietkau
05dd36a980 ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 (improves performance) (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42427
2014-09-06 17:51:39 +00:00
Felix Fietkau
926f000b99 ar71xx: disable ethernet descriptor splitting for now, as it seems to cause tx hangs in some setups
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42333
2014-08-30 09:11:41 +00:00
Felix Fietkau
4ff324191f ar71xx: select m25p80 support instead of spi support where used by mach files (#17699)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42331
2014-08-29 21:10:39 +00:00
Felix Fietkau
2c680151e4 ar71xx: split packets into multiple descriptors on ar716x
This improves performance when doing concurrent rx/tx on a single
ethernet MAC, e.g. when routing between VLANs.

Fixes #13072

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42328
2014-08-29 19:42:08 +00:00
John Crispin
254b2670e1 ar71xx: add Support for RB2011UiAS-2HnD
SVN-Revision: 42317
2014-08-28 06:27:45 +00:00
John Crispin
67cf439237 ar71xx: use ETH_ALEN for consistency
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42280
2014-08-25 06:35:58 +00:00
John Crispin
79c04e1897 ar71xx: enable sysupgrade for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42279
2014-08-25 06:35:54 +00:00
John Crispin
e5e1c03354 ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMAC
This sets the MAC address of the WLAN interface to the "official" primary MAC
address (the one on the label under the devices, and the one used with the stock
firmware). The MAC address used so far (primary-1) isn't even used at all with
the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the
WAN interface (like OpenWrt does with this patch).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42193
2014-08-18 13:10:00 +00:00
John Crispin
5d9b1e7ec1 ar71xx: build factory image for EnGenius ESR900 and ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42189
2014-08-18 13:09:34 +00:00
John Crispin
2c67682192 ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board
The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the
mini-PCIe device. Not configuring the LED pin inside the platform data
makes it impossible to configure it through any standard OpenWrt tool.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 42184
2014-08-18 13:09:14 +00:00
John Crispin
340f87a20f ar71xx: changed the EnGenius ESR900 mtdparts to match that of the ESR1750 since they have the same flash layout
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42177
2014-08-18 13:08:45 +00:00
Imre Kaloz
ecba34a3ee add support for the NC-LINK SMART-300
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 42130
2014-08-11 11:44:51 +00:00
Felix Fietkau
ad876993d3 ar71xx: port missing ath79 machine entry for wndr3700 v4 to 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42044
2014-08-07 18:59:15 +00:00
Felix Fietkau
e41a0cafff ar71xx: add linux 3.14 support
Signed-off-by: Zhao, Gang <gang.zhao.42@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42038
2014-08-07 12:40:53 +00:00
Steven Barth
e7be51a0fd ar71xx: Add support for the WNDR3800CH
Apparently this is a fairly common refurb unit of the 3800 series now,
with merely the recognition string changed in the boot loader.

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 42023
2014-08-07 05:14:26 +00:00
Felix Fietkau
b855faecc0 ar71xx: update Carambola2 platform data
Change list:
 * Remove button info on GPIO12, there is no button there.
 * Remove nvram mtd partition, as it's not used for anything, saves 64k for user data.

Tested building for carambola2 target.

Signed-off-by: Mantas Pucka <mantas@8devices.com>

SVN-Revision: 41993
2014-08-04 14:46:52 +00:00
John Crispin
e7ec79821a ar71xx: oolite: the buttons are not active_low
this caused factory resets when reboot was pressed

Signed-off-by: Brent Thomson <brentthomson@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41932
2014-08-01 11:19:34 +00:00
John Crispin
6ce44430c9 ar71xx: add RTC feature flag to ar71xx/nand
without this the build for NBG6716 fails due to missing packages

https://dev.openwrt.org/ticket/17325

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41930
2014-08-01 10:32:55 +00:00
Imre Kaloz
dc628f2e08 add support for the archer c5
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41814
2014-07-23 12:47:25 +00:00
Imre Kaloz
039fe23f8e refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41812
2014-07-23 11:46:42 +00:00
John Crispin
3bb8589787 ar71xx: fix LED configuration for HiWiFi-HC6361.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 41809
2014-07-23 07:46:07 +00:00
John Crispin
4f5081c911 ar71xx: fix WAN MAC setup on dir-825-c1
Changeset 38690 broke the WAN MAC setup. Here's the fix.

Signed-off-by: Sebastian Kemper <sebastian_ml <at> gmx.net>

SVN-Revision: 41795
2014-07-21 19:26:54 +00:00
John Crispin
6dd7875412 ar71xx: Register reset button on UBNT AirGW
The airGateway has a reset button connected to GPIO 12, so we should use it.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>

SVN-Revision: 41794
2014-07-21 19:26:50 +00:00
John Crispin
a440524f85 ar71xx: Fix GL.iNet WLAN LED
LED script expects WLAN LED to be "gl-connect:red:wlan".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41793
2014-07-21 19:26:46 +00:00
John Crispin
eae9b2541a ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41788
2014-07-21 18:41:52 +00:00
John Crispin
2b48ee80f9 kernel: refresh 3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41777
2014-07-20 17:31:15 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
John Crispin
34c9bc0596 ar71xx: create profile and build image for the OpenMesh OM5P board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41775
2014-07-20 17:31:05 +00:00
John Crispin
f68665ac1d ar71xx: enable sysupgrade for the OpenMesh OM5P
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41772
2014-07-20 17:30:52 +00:00
John Crispin
e50abb5d53 ar71xx: add user-space support for the OpenMesh OM5P
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41770
2014-07-20 17:30:44 +00:00
John Crispin
f424994cbc ar71xx: add kernel support for the OpenMesh OM5P board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41769
2014-07-20 17:30:32 +00:00
John Crispin
7388053ba3 ar71xx: add RB91x boards to uci-defaults 02_network
The default case in 02_network is inappropriate for the MikroTik RouterBOARD 91x boards because they do not have a WAN port, so don't bother setting the non-existent eth1 interface as the WAN port.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>

SVN-Revision: 41767
2014-07-20 17:30:24 +00:00
John Crispin
d19530c693 ar71xx: Add UBNT airGateway support
This patch adds support for the Ubiquiti Networks airGateway.

Based in part on code posted by David Hutchison <dhutchison@bluemesh.net> on openwrt-devel:
  https://lists.openwrt.org/pipermail/openwrt-devel/2013-December/023035.html

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>

SVN-Revision: 41766
2014-07-20 17:30:17 +00:00
Imre Kaloz
7e2c4d5732 extract and fixup the board.bin on the archer
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41757
2014-07-19 13:20:14 +00:00