KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
27977 commits 1 branch 0 tags 154 MiB
Commit graph

12050 commits

Author SHA1 Message Date
Felix Fietkau
e744878636 atheros[uart]: use 32-bit aligned I/O 
Use 32-bit aligned I/O and update base UART address (remove +3 offset).

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41699
 2014-07-17 16:36:49 +00:00
Felix Fietkau
572b532e6a atheros[ar231x-eth]: pass PHY I/O memory via device resources 
Pass PHY I/O memory region via platform resources and remap them
unconditionally.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41698
 2014-07-17 16:36:46 +00:00
Felix Fietkau
9041410017 atheros[ar231x-eth]: pass phys address of I/O memory via platform res 
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41697
 2014-07-17 16:36:43 +00:00
Felix Fietkau
a145d0410b atheros: simplify gpiolib realization 
Each SoCs generation has own independent gpiolib realization, so we
have no reason to keep these realizations in semiuniversal form.
Following modifications are made:
 * Remove valid_mask field
 * Remove ar231x_gpio_chip structure
 * Rename AR2315_GPIO_CR to AR2315_GPIO_DIR
 * Fix count of AR5312 GPIOs
 * Simplify gpio_chip methods realization

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41696
 2014-07-17 16:36:39 +00:00
Felix Fietkau
82e4cde1ce atheros: use irq_set_chained_handler() 
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41695
 2014-07-17 16:36:36 +00:00
Felix Fietkau
0a785ebb7d atheros: simplify AR2315 misc IRQ (un)masking 
Currently AR5312 misc IRQ numbers are used for AR2315+ chips, what cause
us to use switch-case to map IRQ number to ISR bit. Introduce AR2315
specific misc IRQs set and simplify interrupt (un)mask operation.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41694
 2014-07-17 16:36:33 +00:00
Felix Fietkau
d29b61b5f0 atheros: rename some interrupt control handlers 
Rename interrupt control handlers to be consistent with operation names
and add IRQ chips names.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41693
 2014-07-17 16:36:30 +00:00
Felix Fietkau
fceb7f7045 atheros: move AR2315 misc IRQ dispatching to separate function 
Align code with AR5312 realization.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41692
 2014-07-17 16:36:26 +00:00
Felix Fietkau
5c030111a9 atheros: pass UART IRQ number via function argument 
UART IRQ number could be different for different SoCs, so make them
configurable.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41691
 2014-07-17 16:36:23 +00:00
Felix Fietkau
e819113e2e atheros[ar231x-eth]: move driver to atheros subdirectory 
Move driver code to respective vendor subdirectory and fix config
symbol name.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41690
 2014-07-17 16:36:19 +00:00
Felix Fietkau
6be418e3e1 atheros[ar231x-eth]: update MAC and PHY reset method 
Pass reset_set and reset_clear callback functions pointers via
platform_data instead of reset register address.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41689
 2014-07-17 16:36:16 +00:00
Felix Fietkau
4f05d696ad atheros[ar2315-wdt]: update I/O handling 
* Pass iomem and IRQ via platform device resources
 * Remap iomem and use iowrite32 accessor function

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41688
 2014-07-17 16:36:13 +00:00
Felix Fietkau
5ea0cff89c atheros[ar2315-wdt]: update interrupt handling 
Acknowledge watchdog interrupt in arch irq dispatcher and remove odd
watchdog enable call from probe function.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41687
 2014-07-17 16:36:10 +00:00
Felix Fietkau
d0f9972f1c atheros: use correct address space and pointer type for register access 
Make sparse happy :)

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41686
 2014-07-17 16:36:07 +00:00
Felix Fietkau
579481b4f5 atheros[ar2315-wdt]: rename config symbol 
Rename config symbol to AR2315_WDT to avoid confusion with other Atheros
SoCs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41685
 2014-07-17 16:36:03 +00:00
Felix Fietkau
5e76534b23 atheros[ar2315-wdt]: update initialization 
* update driver id to be consistent with other ar231x drivers
 * remove odd module_{init,exit}
 * add module metadata (description, name, etc.)

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41684
 2014-07-17 16:35:59 +00:00
John Crispin
f44d3f9980 ramips: soc wmac eeprom cleanup 
Move eeprom extraction from scripts to dts files.
Additionally there are few other changes like:
- whitespace fixes
- add partition labels where needed
- BR6524N board doesn't exist (lost in translation?)
- fix Edimax 3g-6200nl model
- add wmac eeprom to dts for Asus RT-N14U board

Compile tested all subtargets and their profiles.
Run tested on:
- Asus RT-N15
- Asus RT-N14U
- Buffalo WHR-600D
- Argus ATP52B
- Sparklan WCR-150GN

Few problems noted:
- many boards didn't have wmac eeprom information defined at all
- several boards don't have any patitions defined (see FIXME comments in dts)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41680
 2014-07-17 10:55:31 +00:00
Hauke Mehrtens
d8e47a92b1 ep93xx: add support for kernel 3.10 
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41679
 2014-07-16 21:29:16 +00:00
Hauke Mehrtens
d84579def5 kernel: add CONFIG_I2C_AU1550 config option 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41678
 2014-07-16 20:45:20 +00:00
John Crispin
4beb468f11 lantiq: fix board_id/boardname for VGV7519 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41672
 2014-07-16 11:36:02 +00:00
Felix Fietkau
6c7de7abca au1000: remove linux 3.6 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41670
 2014-07-16 06:55:19 +00:00
Hauke Mehrtens
a36ca743d6 au1000: update to kernel 3.10.44 
This was tested by Bruno Randolf on au1000 (MTX-1)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41669
 2014-07-15 22:03:10 +00:00
Hauke Mehrtens
1636bc6704 brcm47xx: remove kmod-bgmac from profile 
bgmac will be compiled into the kernel since r41594.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41667
 2014-07-15 21:57:13 +00:00
Hauke Mehrtens
f5955c2e6b brcm47xx: fix LEDs on WRT54GL 1.1 
Ticket: #17062
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41666
 2014-07-15 21:54:38 +00:00
Hauke Mehrtens
6f417d5b4b brcm47xx: fix special board handling for some devices 
Some devices were renamed when converted from diag to in kernel board detection and it was not changed in netconfig. Devices not in the
kernel board detection are removed now.

This should close: #17111, #16968, #13202

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41663
 2014-07-14 22:16:19 +00:00
Hauke Mehrtens
7dbea92a9c brcm47xx: improve board detection for some devices 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41662
 2014-07-14 22:03:59 +00:00
Gabor Juhos
2adff1734f ar71xx: add profile and build image for the EnGenius EAP300 v2 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41661
 2014-07-14 21:30:30 +00:00
Gabor Juhos
54206fb0ce ar71xx: add user-space support for the EnGenius EAP300 v2 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41659
 2014-07-14 21:30:28 +00:00
Gabor Juhos
aff3127956 ar71xx: add kernel support for the EnGenius EAP300 v2 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41658
 2014-07-14 21:30:26 +00:00
John Crispin
85cacfd753 lantiq: vgv7519 add missing wps label to dts 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41655
 2014-07-14 18:43:02 +00:00
John Crispin
74db9511dc ramips: basic support for Planex MZK-750DHP 
some gpios are still missing.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41654
 2014-07-14 17:10:39 +00:00
John Crispin
e33584f6b8 ramips: squelch mdio debugging info on rt2880 ethernet 
Use pr_debug rather than pr_info since it is only relevant
for debugging.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 41653
 2014-07-14 17:05:40 +00:00
Gabor Juhos
495aef39f4 ar71xx: add profile and build image for the Tube2H board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41652
 2014-07-14 16:03:37 +00:00
Gabor Juhos
f27f2fec4f ar71xx: add user-space support for the Tube2H board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41650
 2014-07-14 16:03:35 +00:00
Gabor Juhos
51c892053a ar71xx: add kernel support for the Tube2H board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41649
 2014-07-14 16:03:34 +00:00
Imre Kaloz
d7ae7bae57 mark the default WRT1900AC image "factory" 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41648
 2014-07-14 15:02:38 +00:00
Imre Kaloz
6f5a9debed handle sysupgrade tar files on the WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41647
 2014-07-14 15:00:36 +00:00
Gabor Juhos
907bd5345e ar71xx: fix ALFA NETWORK's name 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41643
 2014-07-14 11:10:00 +00:00
Gabor Juhos
fec2596282 ar71xx: add profile and build image for the EnGenius ESR900 
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5715/
[juhosg: change subject]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41642
 2014-07-14 10:25:53 +00:00
Gabor Juhos
50c554a475 ar71xx: add user-space support for the EnGenius ESR900 
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5716/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41641
 2014-07-14 10:25:51 +00:00
Gabor Juhos
0bec90b830 ar71xx: add kernel support for the EnGenius ESR900 
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5714/
[juhosg:
  - drop nvram.c modifications,
  - create a separate kernel patch,
  - use ath79_setup_qca955x_eth_cfg helper,
  - merge esr900_{010,common}_setup functions,
  - statically init AR8327 pad configurations,
  - use pr_err instead of printk]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41640
 2014-07-14 10:25:51 +00:00
John Crispin
c8bde9da4a lantiq: detect board in preinit state 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41638
 2014-07-14 07:38:52 +00:00
John Crispin
e503eeb465 ar71xx: add support for nanostation m xw 
SVN-Revision: 41636
 2014-07-14 07:38:43 +00:00
John Crispin
de5fd0a189 ar8216: add new phyid 0x004dd043 (ar8326) 
Used in ubiquity nanostation xw boards

SVN-Revision: 41635
 2014-07-14 07:38:39 +00:00
John Crispin
76ba6846a2 ramips: fix port mapping and extract wmac eeprom on ZBT-WA05 board 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41634
 2014-07-14 07:38:32 +00:00
John Crispin
8c577d9fde ramips: extract mac address from flash on WHR-600D board 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41633
 2014-07-14 07:38:28 +00:00
John Crispin
4af1b51ec3 ramips: extract default lan_mac from eth0 
The default case of ramips_setup_macs() is useful when mtd-mac-address is defined in dts.
But lan_mac is not set by default, this results in lan and wan having the same mac.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41632
 2014-07-14 07:38:23 +00:00
Imre Kaloz
1d11ffa4f2 use the full boardname for the wrt1900ac image 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41631
 2014-07-13 22:15:03 +00:00
Imre Kaloz
81d85a717a add sysupgrade support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41630
 2014-07-13 22:12:56 +00:00
Imre Kaloz
88121f229c update wrt1900ac dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41629
 2014-07-13 22:11:43 +00:00