KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
43096 commits 1 branch 0 tags 154 MiB
Commit graph

20 commits

Author SHA1 Message Date
Ademar Arvati Filho
27b2f0fc0f kirkwood: add support for Iomega Storcenter ix2-200 
Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell
 Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of
 flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC

Specification:
- SoC: Marvell Kirkwood 88F6281
- CPU/Speed: 1000Mhz
- Flash-Chip: Hynix NAND
- Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16
- RAM: 256MB
- LAN: 1x 1000 Mbps Ethernet
- WiFi: none
- 3x USB 2.0
- UART: for serial console

Installation instructions - easy steps:
1. download factory.bin and copy into tftp server
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    setenv serverip 192.168.1.1
    setenv ipaddr 192.168.1.13
    tftpboot 0x00800000 factory.bin
    nand erase 0x100000 $(filesize)
    nand write 0x00800000 0x100000 $(filesize)
    run bootcmd
    ```
3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Installation steps nand bad blocks proof:
1. download initramfs-uImage and copy into usb ext2 partition
    ```
    mkfs.ext2 -L ext2 /dev/sdh1
    mount -t ext2 /dev/sdh1 /mnt
    cp initramfs-uImage /mnt/initramfs.bin
    umount /mnt
    ```
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000
    ```
3. log into openwrt and sysupgrade to install into flash
    ```
    sysupgrade -n /tmp/sysupgrade.bin
    ```
4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
 2018-07-30 15:21:00 +02:00
Mathias Kresin
0674a99f7e kirkwood: sort occurrences of boardame alphabetically 
This restores the alphabetical sort that was present
before the renaming of boardname.

Signed-off-by: Mathias Kresin <dev@kresin.me>
 2018-01-09 22:06:55 +01:00
Alberto Bursi
0e94df65ca uboot-envtools: add pogoplug v4 
add pogoplug v4 envs support in uboot-envtools

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
 2018-01-09 22:06:55 +01:00
Mathias Kresin
c9e2c35f46 kirkwood: use the generic board detect 
Drop the target specific detection function in favour of the generic
one provided by base-files.

Signed-off-by: Mathias Kresin <dev@kresin.me>
 2018-01-09 22:06:55 +01:00
Mathias Kresin
0ebdf0c1d3 kirkwood: drop support for orphaned boards 
No image build code for the Guruplug, Sheevaplug and NSA310S exists. Drop
support for the boards for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
 2018-01-09 22:06:54 +01:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function 
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
 2017-07-15 23:13:34 +02:00
Alberto Bursi
760185972f uboot-envtools: add nsa325 envs 
adding nsa325 envs for consistency with other kirkwoods

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
 2017-02-11 21:16:28 +01:00
Alberto Bursi
55ecceb84e uboot-envtools: add nsa310b envs 
accessing the u-boot's envs on this device is required to read the mac address.
These are the envs of the new u-boot, not of the stock one.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
 2017-01-24 16:21:25 +01:00
Piotr Dymacz
35ed3be59f uboot-envtools: fix code formatting style in uci-defaults files 
Few minor code formatting style fixes, including:

- keep one board per line
- always use "|\" (for consistency)
- remove redundant double quotes and empty lines

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
 2016-12-20 09:35:36 +01:00
Paul Wassi
d6e8b1f841 uboot-envtools: add 'dockstar' for kirkwood 
Add board 'dockstar' to known fw_env-configurations.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
 2016-11-21 10:10:38 +01:00
Luka Perkov
2f8ebe10b9 uboot-envtools: kirkwood: fix EA35/4500 board names 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47457
 2015-11-11 12:48:29 +00:00
Luka Perkov
3ef14d0c3d kirkwood: rework Linksys EA[34]500 DTS 
- Use board engineering names rather than marketing names

- Linksys uses a dual firmware layout, where the bootloader
  will switch to the other stored image when one fails to
  boot three consecutive times.

  In order to make this firmware compatible with the factory
  images and the stock bootloader we must match this layout.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47429
 2015-11-10 00:16:24 +00:00
Luka Perkov
64653e6373 uboot-envtools: fix Linksys EA3500 env size 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 44037
 2015-01-18 16:45:11 +00:00
Luka Perkov
180c1f3302 uboot-envtools: add more kirkwood boards 
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43747
 2014-12-18 15:53:46 +00:00
Luka Perkov
4f1a9470f0 kirkwood: add support for Linksys EA3500 
http://wiki.openwrt.org/toh/linksys/ea3500

Signed-off-by: Dan Walters <dan@walters.io>

SVN-Revision: 43230
 2014-11-10 23:55:10 +00:00
Luka Perkov
e575c759ca uboot-envtools: use new scripts from /lib/ to match boards 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41340
 2014-06-26 10:14:14 +00:00
Luka Perkov
591b5285f5 uboot-envtools: add support for kirkwood ea4500 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40872
 2014-05-28 21:43:42 +00:00
Luka Perkov
2381f4a7b0 uboot-envtools: add Pogoplug E02 support 
The settings require that the OpenWrt provided u-boot is used as either
first or second stage bootloader as it modifies the partitioning scheme
to move the u-boot environment to a separate mtd partition.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 40829
 2014-05-23 08:17:02 +00:00
Luka Perkov
c15bec4a1b uboot-envtools: update kirkwood scripts 
Also, scripts can be installed as data so let's change that here too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38403
 2013-10-14 19:46:43 +00:00
John Crispin
e75106aa0d move boot related packages to their own folder 
SVN-Revision: 33781
 2012-10-16 13:44:25 +00:00
Renamed from package/uboot-envtools/files/kirkwood (Browse further)