Commit graph

20 commits

Author SHA1 Message Date
Florian Fainelli
3ceebbba14 add Ralink V11ST-FE board support
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

SVN-Revision: 30561
2012-02-15 21:13:11 +00:00
Gabor Juhos
99c019fb0d ramips: add preliminary support for the Asus RT-N56U board
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
Gabor Juhos
9cf1d4e06e ramips: scripts updates
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
Gabor Juhos
809fe38e41 ramips fix f5d8235-v1 diag LED support
SVN-Revision: 29857
2012-01-22 18:11:39 +00:00
Gabor Juhos
e9d8deaaed ramips: add sysled and sysupgrade to wr512-3gn
Patch from #10035.

SVN-Revision: 29847
2012-01-22 13:43:23 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
2011-12-28 08:43:43 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
Gabor Juhos
0c38d36488 ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
Gabor Juhos
72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
Gabor Juhos
ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
Gabor Juhos
3f986df05f ramips: rt305x: add support for the DIR-600 B1,B2 boards
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
Gabor Juhos
42d3a55347 ramips: rt305x: rename LEDs on the DIR-300-B1
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
Gabor Juhos
1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.

SVN-Revision: 27478
2011-07-06 08:05:00 +00:00
Gabor Juhos
d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board
SVN-Revision: 27477
2011-07-06 08:04:55 +00:00
Gabor Juhos
d5a7e2f5c1 ramips: initial board support for MOFI3500-3GN
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
Gabor Juhos
d701a72760 ramips: add sysupgrade and status LED support for HW550-3G
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26320
2011-03-27 19:19:40 +00:00
Gabor Juhos
09aec474af ramips: add diag support
SVN-Revision: 20799
2010-04-11 17:47:23 +00:00