Commit graph

295 commits

Author SHA1 Message Date
Piotr Dymacz
c40477519e uboot-envtools: add support for YunCore SR3200 and XD3200
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-12 09:57:40 +01:00
Yutang Jiang
ad907e1c03 layerscape: add 64b/32b target for ls1046ardb device
Add support for NXP layerscape ls1046ardb 64b/32b Dev board.

LS1046ARDB Specification:
-------------------------
Memory subsystem:
* 8GByte DDR4 SDRAM (64bit bus)
* 512 Mbyte NAND flash
* Two 64 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
* On-board 4G eMMC
Ethernet:
* Two XFI 10G ports
* Two SGMII ports
* Two RGMII ports
PCIe:
* PCIe1 (SerDes2 Lane0) to miniPCIe slot
* PCIe2 (SerDes2 Lane1) to x2 PCIe slot
* PCIe3 (SerDes2 Lane2) to x4 PCIe slot

* USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port
* UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-12 09:57:40 +01:00
Yutang Jiang
d5fc7430ca layerscape: uboot-layerscape: prefer github over git.freescale.com
In order to prevent the impact of the merger of the company and the potential
rebase of the SDK repositories, migrate the u-boot source to github.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-12 09:57:40 +01:00
Mathias Kresin
36148d923b uboot-lantiq: Add BT Home Hub 5A support
Based on the submission to the uboot-lantiq repo by Martin Blumenstingl.

Use the ddr_settings.h from the GPL tarball. The NAND boot optimized
one (with memory tuning enabled) doesn't work for the UART boot image.

Use the same mtd layout as the stock u-boot. Add add UBI support.

Use the leds to indicate boot status like it is done with the stock
u-boot. Switch on the red power led if kernel image can't be loaded.
Otherwise switch the green led on.

Make only the ramboot u-boot available. Only this image is required for
the first installation of LEDE.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-29 21:40:16 +01:00
Eddi De Pieri
9720185820 uboot-envtools: make it not shared
uboot-envtools have some stuff related to the cpu.

This should fix following error on lantiq soc:

Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/base/uboot-envtools_2015.10-1_mips_24kc.ipk.
Configuring uboot-envtools.
//usr/lib/opkg/info/uboot-envtools.postinst: .: line 10: can't open '/lib/ar71xx.sh'

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-23 10:17:55 +01:00
Eddi De Pieri
ea12a80276 uboot-lantiq: vgv7519 fix tftp loading of big kernel/image size
On my board:
Bytes transferred = 7084442 (6c199a hex)
   Image Name:   MIPS OpenWrt Linux-3.10.49
   Created:      2014-11-11  17:40:00 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    7084378 Bytes = 6.8 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA: uncompress or overwrite error
7 - must RESET b
ROM VER: 1.0.5
CFG 01

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-23 08:43:49 +01:00
John Crispin
3c52cbfa53 Revert "grub2: add PKG_FIXUP:=autoreconf"
this caused build errors on x86

This reverts commit a0ea22ac43.

Signed-off-by: John Crispin <john@phrozen.org>
2016-11-21 16:49:54 +01:00
Alexandru Ardelean
a0ea22ac43 grub2: add PKG_FIXUP:=autoreconf
The host-side build of grub2 requires this sometimes.
This will re-generate the ./configure script from configure.ac.
I don't know the conditions of how this reproduces, it just
sometimes appears, and sometimes doesn't.

Build error
```
<lede-dir>/build_dir/target-x86_64_musl-1.1.15_yogi/host/grub-2.02~beta2/build-aux/missing: line 81: aclocal-1.14: command not found
WARNING: 'aclocal-1.14' is missing on your system.
         You should only need it if you modified 'acinclude.m4' or
         'configure.ac' or m4 files included by 'configure.ac'.
         The 'aclocal' program is part of the GNU Automake package:
         <http://www.gnu.org/software/automake>
         It also requires GNU Autoconf, GNU m4 and Perl in order to run:
         <http://www.gnu.org/software/autoconf>
         <http://www.gnu.org/software/m4/>
         <http://www.perl.org/>
Makefile:3962: recipe for target 'aclocal.m4' failed
```

Adding PKG_FIXUP adds sanity (i.e. autoreconf is used for host & target
builds) over just using HOST_FIXUP.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-11-21 12:54:24 +01:00
Paul Wassi
d6e8b1f841 uboot-envtools: add 'dockstar' for kirkwood
Add board 'dockstar' to known fw_env-configurations.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-11-21 10:10:38 +01:00
Piotr Dymacz
d86f08cc94 uboot-envtools: add support for YunCore CPE830
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
dcceea4fd3 uboot-envtools: add support for YunCore CPE870
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
9ee8257cc7 uboot-envtools: add support for YunCore AP90Q
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Yutang Jiang
4a6f9fc633 layerscape: uboot: using perl script:byte_swap.pl to replace tcl script:byte_swap.tcl
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-11-16 10:58:09 +01:00
Alberto Bursi
decf6b3314 yamonenv: move to Boot Loaders submenu
Boot Loaders submenu is the place where all other boot loaders are.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-08 11:17:10 +01:00
Alberto Bursi
08279810ed uboot-envtools: move to Boot Loaders submenu
Boot Loaders submenu is where other bootloader tools (fconfig and grub2-editenv) are.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-03 08:21:47 +01:00
Jo-Philipp Wich
7a58972680 uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)
The current uboot default config for the A13 SOM erroneously enables support
for the AXP209 power regulator IC which is not present on the board.

This superfluous support module sets an incorrect initial clock frequency and
confuses the kernel, ultimately leading to a boot failure later on.

Properly disable the PMIC support and enable the EHCI support by translating
the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and
USB_EHCI_HCD symbols respectively.

Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and
refresh the remaining patches of the series while we're at it.

Reported-by: Mario Fischer <mario-fischer@web.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 02:11:19 +01:00
Yutang Jiang
15a14cf166 layerscape: add 64b/32b target for ls1012ardb device
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00
Yutang Jiang
c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00
Paul Wassi
776aa91b0f uboot-kirkwood: fix default bootcmd for Seagate Dockstar
Fix the default value for the 'bootcmd' environment variable.
Therefore make the default bootcmd work for buildbot's images.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-10-27 12:45:02 +02:00
Paul Wassi
705240eeb5 uboot-kirkwood: bump to upstream 2016.09.01
Bump U-Boot for Kirkwood to upstream 2016.09.01. Local patches
cleaned up and reworked.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-10-27 12:44:54 +02:00
Stijn Tintel
e3875350f3 ar71xx: add support for D-Link DAP-2695 rev. A1
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: John Crispin <john@phrozen.org>
2016-10-27 01:50:42 +03:00
Jo-Philipp Wich
f2752f4735 grub2: add missing SECTION variable and remove non breaking space
Fix metadata scan failure in the grub2 package by removing an unexpected
invisible space character and by adding back the missing SECTION variable
which was removed with d140648.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-26 17:53:53 +02:00
André Valentin
ebd7e565c7 package/uboot-envtools: Add support for ZyXEL NBG6817
Signed-off-by: André Valentin <avalentin@marcant.net>
2016-10-26 12:37:47 +02:00
Yutang Jiang
e7dc511e64 uboot-zynq: fix compile error for be short of dtc
While enable zynq uboot:
CONFIG_PACKAGE_uboot-zynq-zc702
CONFIG_PACKAGE_uboot-zynq-zed
CONFIG_PACKAGE_uboot-zynq-zybo

make will arise dtc error:
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
make[4]: *** [checkdtc] Error 1

Pass the kernel dtc to uboot for compile.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-26 12:37:46 +02:00
Alberto Bursi
d140648622 grub2: move to Boot Loaders category
because boot loaders are in Boot Loaders, not in Utilities -> Boot Loaders

Also moved brub2-editenv in Utilities -> Boot Loaders

Part of a wider housekeeping effort on the packages repository.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Alberto Bursi
f9ed2bc92f fconfig: move to Boot Loaders submenu of Utilities
Boot Loaders submenu of Utilities is the most logical place to find fconfig and other bootloader tools.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Alberto Bursi
762928a13e rbcfg: move to Boot Loaders submenu of Utilities
Boot Loaders submenu of Utilities is the most logical place to find rbcfg and other bootloader tools.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Imre Kaloz
3764caa934 mvebu: add support for the Linksys WRT3200ACM (Rango)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-24 08:45:06 +02:00
Alexandru Ardelean
5b607bd8d8 boot/rbcfg: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Dirk Neukirchen
054f3fd57b uboot-ar71xx: make reproducible
OpenWrt uses ancient u-boot thats not reproducible.

There are multiple upstream changes that introduce
reproducible builds like:
859e92b775fd8ebcfacc591eaf621b677c95b6f7
(not used here - the CMD_DATE/TIMESTAMP functionality
seems to be disabled by config)

70d39f57146a6cb94736db39c770c3d95e07bedb
f3f431a712729a1af94d01bd1bfde17a252ff02c
2d9efa1227262249d381ed5d9d341cbdba76e62d

Instead of changing the Makefile too much
this changeset just tries to use the
changes in Makefile from current upstream git f5fd45f

*Should* fix issue reported by reproducible lede page:
https://tests.reproducible-builds.org/lede/lede.html

Compile tested only
(verified w. hexdump & md5sum)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-10-15 11:36:51 +02:00
Daniel Engberg
9edfe7dd13 source: Switch to xz for packages and tools where possible
* Change git packages to xz
* Update mirror checksums in packages where they are used
* Change a few source tarballs to xz if available upstream
* Remove unused lines in packages we're touching, requested by jow- and blogic
* We're relying more on xz-utils so add official mirror as primary source, master site as secondary.
* Add SHA256 checksums to multiple git tarball packages

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-10-06 12:16:56 +02:00
Ben Whitten
6b31c4cb38 package: Add U-Boot for at91
Adds u-boot for the at91 platform and a couple of boards.
The build honours COPTS to benefit from fortify source et al.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-10-06 12:15:13 +02:00
Jonas Gorski
c4823622d8 uboot-mvebu: reset the 88E1512 PHY to make the wan port work
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 13:03:18 +02:00
Jonas Gorski
d8075b15d0 uboot-mvebu: make hidden and be m for clearfog to fix IB failing to add it
Uboot-mvebu isn't a real package, which will break the image builder
when it tries to install it during the packing step. Instead of cleafog
selecting it through its default packages, make it default to m if the
clearfog profile is selected.

This will ensure it is always build, but never added to the rootfs. This
fixes creating images for clearfog with IB.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 12:48:18 +02:00
Jonas Gorski
bc1f006b4e uboot-mvebu: also install into KDIR to ensure it packaged in IB
The clearfog image requires u-boot, so package it into KDIR to make sure
it is available in imageBuilder.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 12:47:36 +02:00
Tim Harvey
a4b86b292a boot: kobs-ng: update kobs-ng for newer kernels
This allows kobs-ng to flash the SPL successfully on the 4.4 kernel used by
the Gateworks IMX boards supporting NAND. The previous version of kobs-ng
worked with the 3.14 kernel but will brick a board making its SPL unbootable
for the 4.4 kernel.

See http://trac.gateworks.com/wiki/ventana/bootloader#nandspl for instructions
on updating the SPL from Linux.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-04 13:36:09 +02:00
Felix Fietkau
7130833a27 mvebu: fix boot script for booting from mmc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:53 +02:00
Josua Mayer
c8580f51ba u-boot-envtools: fix building with glibc
tools/env/fw_env.c misses to include stdint.h.
Apparently musl doesn't mind and includes this header by default,
but glibc does not and causes the build to fail.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2016-08-18 09:49:18 +02:00
John Crispin
10f9ea0bc6 uboot-lantiq: package does not build inside the SDK
the packages failed to build inside the SDK due to missing ethernet
firmware files.

Signed-off-by: John Crispin <john@phrozen.org>
2016-08-03 15:30:13 +02:00
Felix Fietkau
cc7029f8a9 uboot-ar71xx: fix default selection for NBG460N/550N/550NH
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 13:50:43 +02:00
Zhao Gang
d963ddf042 ar71xx: add support for gl-ar300m
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-20 00:21:48 +02:00
Felix Fietkau
6b654ab741 uboot-oxnas: fix build error on non-linux systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 12:48:28 +02:00
Piotr Dymacz
14ee2b0642 uboot-envtools: add support for jjPlus JWAP230
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Piotr Dymacz
c30fd5e87d uboot-envtools: add support for Wallys DR531
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Hauke Mehrtens
3f38356893 packages: prefer http over git for git protocol
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-22 19:32:06 +02:00
Mathias Kresin
b32eb40210 uboot-lantiq: Add Arcadyan ARV7506PW11 support
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-22 19:32:06 +02:00
Daniel Golle
fac7ba1abc uboot-envtools: add support for ZBT-WG2626
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-19 16:22:23 +02:00
John Crispin
928163bad2 uboot-envtools: add ipq806x support
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Felix Fietkau
704965d93f uboot-envtools: add config for WBMR300 (lantiq)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
Felix Fietkau
57343b210a uboot-lantiq: get rid of bogus profile dependencies
Turn them into subtarget dependencies instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-08 06:42:42 +02:00