Commit graph

12515 commits

Author SHA1 Message Date
John Crispin
ddb9bf4bac lantiq xway: generate ramdisk image by default
The installation process on nand-based boards using ubi
like the BTHOMEHUBV2B makes use of a ramdisk image, so it
makes sense to generate this by default.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 42920
2014-10-14 19:01:10 +00:00
John Crispin
70def60b04 ar71xx: fix seama factory type image generation.
Currently JFFS2 end-of-filesystem marker 0xdeadc0de is included the
computation of image's MD5 checksum as part of the seama header.  But
OpenWrt will erase blocks including and after the marker thus
invalidating the checksum after the first boot.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42915
2014-10-14 12:21:41 +00:00
John Crispin
24a0269b71 ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.
Qihoo C301 has 2 flash chips of which one is used as primary and the
other is used as backup.  OEM U-Boot will try to boot an activeregion N
with imageNstatus=0 and imageNtrynum <= imagemaxtry.  If such a region
is found, bootloader will try to increment imageNtrynum and boot it.

This patch tries to reset imageNtrynum after each successful boot (if
the boot process reaches the execution of /etc/init.d/done).

	root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9
	00000000  9e f3 63 91 61 63 74 69  76 65 72 65 67 69 6f 6e  |..c.activeregion|
	00000010  3d 31 00 69 6d 61 67 65  31 73 74 61 74 75 73 3d  |=1.image1status=|
	00000020  30 00 69 6d 61 67 65 32  73 74 61 74 75 73 3d 30  |0.image2status=0|
	00000030  00 69 6d 61 67 65 32 74  72 79 6e 75 6d 3d 30 00  |.image2trynum=0.|
	00000040  69 6d 61 67 65 6d 61 78  74 72 79 3d 33 00 69 6d  |imagemaxtry=3.im|
	00000050  61 67 65 31 74 72 79 6e  75 6d 3d 30 00 00 00 00  |age1trynum=0....|
	00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42914
2014-10-14 12:21:36 +00:00
John Crispin
20940138ac scripts: fix wrong usage of '==' operator
[base-files] shell-scripting: fix wrong usage of '==' operator

normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.

this patch does not change the behavior/logic of the scripts.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42911
2014-10-14 12:21:11 +00:00
John Crispin
8267c0e2ac rb532: switch to 3.14 and ath5k
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42910
2014-10-14 11:32:57 +00:00
John Crispin
cc292d7de8 generic: fix yaffs compilation on 3.14
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42909
2014-10-14 11:32:48 +00:00
John Crispin
af58224462 rb532: add 3.14 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42908
2014-10-14 11:32:43 +00:00
John Crispin
0f790247e3 lantiq: allow pcie to be disabled by dts + vgv7519 fix pci irq + disable pcie by dts
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 42907
2014-10-14 11:04:25 +00:00
John Crispin
99c238ff15 ar71xx: Fix LED definitions for the DRAGINO2 board
This patch fixes LED definitions for the DRAGINO2 board.

1. It renames the Router/USB led to System, as it is now marked "SYS" on the board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN, LAN and WAN leds in the UCI defaults.
5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 42897
2014-10-14 10:33:07 +00:00
John Crispin
28d57f707d mpc85xx: use wpad-mini in WDR4900 profile instead of wpad
This change makes the profile of WDR4900 more consistent with other router
specific profiles.

Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>

SVN-Revision: 42896
2014-10-14 10:30:56 +00:00
Rafał Miłecki
5a03d0c931 bcm53xx: fix hangs in PCIe2 host driver
Accessing CFG regs with no card present results in SoC hang.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42895
2014-10-14 08:06:15 +00:00
Rafał Miłecki
540a6a45e4 bcm53xx: add temp bcma workaround that allows debugging
This way we will get logs if case of hang/crash in bcma or related code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42894
2014-10-14 05:31:54 +00:00
John Crispin
4b45695c9a at91: fix at91-adc dependencies
Error reported by buildbot:
Package kmod-at91-adc is missing dependencies for the following libraries:
input-core.ko

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 42893
2014-10-13 19:45:31 +00:00
John Crispin
06a849575d ralink: Build 8M image for 7Links PX-4885
7Links PX-4885 (clones) can also be purchased with 8MB flash.
Creating images for these routers, use dtsi for common part

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42892
2014-10-13 19:41:36 +00:00
Rafał Miłecki
746b80f166 brcm47xx: image: create initramfs TRX nodictionary images
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42889
2014-10-13 05:53:33 +00:00
Felix Fietkau
d2b08fb4ab x86: remove old soekris config hacks, install a more appropriate default /etc/config/network with lan+wan
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42888
2014-10-12 20:25:30 +00:00
Felix Fietkau
275cef6363 image.mk: clean up and parallelize mkfs calls
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42878
2014-10-12 15:00:49 +00:00
John Crispin
1bbc5de86e ralink: various i2c related fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42868
2014-10-10 08:56:53 +00:00
John Crispin
af1207b58c ramips: add support for Nexx WT1520
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 42867
2014-10-10 08:56:43 +00:00
Rafał Miłecki
78be7225c3 bcm53xx: prepare to support Asus RT-N18U
DT file doesn't include any GPIOs yet, but let's add it as we got some
interest in this device on IRC.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42864
2014-10-09 16:36:51 +00:00
Rafał Miłecki
9473673ae3 bcm53xx: add support for Buffalo WZR-1750DHP
Let's generate a simple TRX file as we can't get encrypted one.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42863
2014-10-09 16:36:05 +00:00
Steven Barth
195a618877 kernel: add missing symbols for 3.14
spotted by buildbot brcm2708:
http://buildbot.openwrt.org:8010/builders/brcm2708/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 42858
2014-10-09 07:18:07 +00:00
Steven Barth
c118e5edf4 network: Unbind DHCPv6 from underlying interfaces
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42848
2014-10-08 13:08:05 +00:00
Felix Fietkau
fa5237d936 cns3xxx: Adopt irq_domain support for cns3xxx gpio driver
Have gpio driver adopt irqdomain support so that there are
non-overlapping allocations of irq numbers mapped to gpio's.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 42844
2014-10-08 10:28:10 +00:00
Felix Fietkau
736419452b cns3xxx: fix shared PCI interrupt mapping
This patch originally failed to combine INTA/B/C/D onto a single ARM CPU
interrupt. Instead, it mapped INTA/B/C and excluded D. This patch
corrects the issue by mapping all four interrupts to the single ARM CPU
interrupt. The original intent of the patch still holds as the newer PCB
take advantage of isolated interrupts. This fix only applies to older
PCB's that do not route INTA/B/C/D to unique external ARM CPU
interrupts.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 42830
2014-10-07 10:37:48 +00:00
Felix Fietkau
0563e0225e cns3xxx: fix register for enabling MMC/SD pins
also fixes a GPIO related regression from the upgrade to 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42829
2014-10-07 10:37:09 +00:00
Rafał Miłecki
b9d3767ada kernel: move old "rootfs" splitter into separated file
This will simplify removing it in the future.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42828
2014-10-07 07:35:17 +00:00
Rafał Miłecki
2818493e82 bcm53xx: add Netgear R6300 V2 LEDs and buttons
Thanks tusc (our forum user) for checking GPIOs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42827
2014-10-06 21:33:17 +00:00
John Crispin
ec69988d09 at91: remove support for TQMa9263
This board is EOL, we should not bother anymore with it.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42825
2014-10-06 20:08:40 +00:00
John Crispin
c085d07ee3 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition
SVN-Revision: 42824
2014-10-06 20:08:30 +00:00
John Crispin
6a961da231 lantiq - vgv7519: enable pci bus
SVN-Revision: 42823
2014-10-06 20:08:18 +00:00
John Crispin
c2e4007bc1 lantiq - vgv7519: remove spi_cs4, since the board use this line for something else
SVN-Revision: 42822
2014-10-06 20:08:11 +00:00
John Crispin
4cdf861521 lantiq - vgv7519: fix open-drain configuration for stp
SVN-Revision: 42821
2014-10-06 20:08:04 +00:00
John Crispin
1e7962ceaf lantiq - vgv7519: add pci-rst entry into dts
SVN-Revision: 42820
2014-10-06 20:07:56 +00:00
John Crispin
ea9aec2fa9 lantiq - vgv7519: remove exin definition copied from dev-board dts
SVN-Revision: 42819
2014-10-06 20:07:45 +00:00
John Crispin
9483a322dd lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board
SVN-Revision: 42818
2014-10-06 20:07:30 +00:00
John Crispin
48d67fe650 lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling
SVN-Revision: 42817
2014-10-06 20:07:19 +00:00
John Crispin
d0606948cb lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up)
SVN-Revision: 42816
2014-10-06 20:07:04 +00:00
John Crispin
7103d61271 lantiq: fix some alt function on pinctrl-xway
SVN-Revision: 42815
2014-10-06 20:06:51 +00:00
John Crispin
619de2faf2 octeon: add patches which are not upstreamed yet
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42811
2014-10-06 20:06:06 +00:00
John Crispin
7350373657 octeon: remove kmod-ath9k from default packages
Looks like the targets are Ubiquiti routers which don't come with any wireless cards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42810
2014-10-06 20:05:52 +00:00
John Crispin
90cbc9a04f octeon: prepare elf kernel image and md5sum for usb copying
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42809
2014-10-06 20:05:39 +00:00
John Crispin
3ff9c76e9e octeon: fix serial console for 3.14 kernel
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42808
2014-10-06 20:05:29 +00:00
John Crispin
97c202968a ralink: various i2c fixes
the driver did not handle all states correctly causing a deadlock of the i2c hw block.

Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>

SVN-Revision: 42807
2014-10-06 20:05:13 +00:00
Rafał Miłecki
d30e92884e kernel: add some warnings to the old (built-in) rootfs splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42806
2014-10-06 15:07:54 +00:00
Rafał Miłecki
a58a4bb580 kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOT
This enables dedicated "rootfs" splitter by default. We still keep
CONFIG_MTD_SPLIT_SQUASHFS_ROOT, so the old (built-in) splitter will be
used as a fallback in case of problems.
Once we decide the dedicated partitioner works stable, we should remove
the old one completely.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42805
2014-10-06 14:02:06 +00:00
Rafał Miłecki
b87ff2cae7 kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLIT
We want to remove that old (built-in) splitter at some point.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42804
2014-10-06 13:49:11 +00:00
John Crispin
36faa5b145 lantiq: led name has changed from adsl -> dsl
make the notify script aware of this.

https://dev.openwrt.org/ticket/18005

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42798
2014-10-06 05:18:52 +00:00
John Crispin
e77ae183a1 ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42797
2014-10-06 04:53:34 +00:00
John Crispin
7f772910a1 ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection
[ ] conditions should use = instead of == for string equality.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42796
2014-10-06 04:53:25 +00:00