Commit graph

68 commits

Author SHA1 Message Date
John Crispin
2adc6468bf ipq806x: build Linksys EA8500 images
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
Ash Benz
ef02e8967c ipq806x: Add Archer C2600 to image/Makefile
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ram Chandra Jangir
5e49c57956 ipq806x: Add support for linux-4.4
1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
2016-05-27 15:50:17 +02:00
John Crispin
78a6a9aec3 ipq806x: Add support for Netgear D7800
Signed-off-by: Tathagata Das <tathagata@alumnux.com>

SVN-Revision: 48360
2016-01-19 10:16:36 +00:00
Felix Fietkau
2499a57d92 targets: add kernel image dependencies on device tree files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48146
2016-01-06 18:39:06 +00:00
Jonas Gorski
d9197d8b0c ipq806x: fix BOARD_NAME spellings
the board names used by the upgrade check differ from the device names
in case, so always set them. We can't rely on tolower or similar since
different locales might have different rules for lower case letters, so
set them explicitily.

Fixes sysupgrade rejecting *-sysupgrade.tar because of the difference.

Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47381
2015-11-04 11:33:31 +00:00
Jonas Gorski
a752ff1f8e ipq806x: fix R7500 kernel generation
Obviously the dummy rootfs must be after the kernel (uImage), not
included in it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46837
2015-09-10 10:09:26 +00:00
Jonas Gorski
8b4df1efd5 ipq806x: add support for Netgear Nighthawk X4 R7500
Add support for the Netgear Nighthawk X4 R7500 and build
appropariate sysupgrade and factory images.

Known issues:
 * 5 GHz wifi not working - there is no quantenna driver
 * One of the USB ports is not working

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46796
2015-09-04 14:46:06 +00:00
Jonas Gorski
89815d4645 ipq806x: build images and add sysupgrade support for AP148
Add full ubi and sysupgrade images for AP148 and add sysupgrade support
for ipq806x to allow updating the current installation.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46789
2015-09-04 14:45:00 +00:00
Jonas Gorski
e3f6876623 ipq806x: clear IMAGES for devices
Ensure that IMAGE-less devices won't keep the IMAGES of any previous
devices.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46788
2015-09-04 14:44:51 +00:00
Jonas Gorski
7a962fb55a ipq806x: wrap legacy image in uImage
Wrap the zImage in a uImage header so we can easily boot it from legacy
u-boots.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46787
2015-09-04 14:44:48 +00:00
Jonas Gorski
c7d8377931 ipq806x: switch to new image build system
Switch ipq806x to the new image build system. Image files might change
slightly their names, but the generated files should not change.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46602
2015-08-14 15:10:54 +00:00
Felix Fietkau
c4c986e419 ipq806x: add support for non-dt enabled ap148 bootloader
Certain AP148 platforms (and derivative) use bootloaders which did not
have DT enabled.
In order to support these old platforms, we'll now make the following
modifications:
*explicitely add the memory node in the AP148 DT: this used to be added
 by new u-boot through a run-time patch mechanism. We'll now add it
 explicitely so it works on boots which don't support that feature. New
 boots will have the node twice, the second one will be ignored.
*add the zImage generation next to the FIT image for AP148.

Other platforms using non-DT enabled bootloaders may want to leverage
this zImage code to generate their own firmare as well.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46555
2015-08-04 23:09:43 +00:00
John Crispin
096b3759a9 build: Prevent more gzip timestamps
To improve reproducibility, prevent the inclusion of timestamps
in the gzip header.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 46361
2015-07-14 09:57:45 +00:00
John Crispin
12772b66fe ipq806x: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45823
2015-05-29 11:28:44 +00:00
John Crispin
0ddebefc74 ipq806x: add db149 support to OpenWrt init scripts
DB149 is a IPQ8064 based platform. This patch adds the init scripts to
detect it, configure the network accordingly, and generate a flashable
image for it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45537
2015-04-21 07:15:47 +00:00
John Crispin
88ddb37461 ipq806x: update target to v3.18
Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386
2015-02-11 10:09:23 +00:00
John Crispin
3c1f6e358d ipq806x: Add support for IPQ806x chip family
Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.

All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.

Support is currently limited to AP148 board but can be extended to other
platforms in the future.

These changes do not cover ethernet connectivity.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 42334
2014-08-30 09:32:58 +00:00